Suffolk · England
Bath chip & crack repair in Alderton, Suffolk
Bath repair for Alderton, without a refit. Send us pictures for a fixed price, then we come to you.
- Repairs from £95
- A kit repair that didn’t last
- Rust by the waste and overflow
Where we work around Alderton
Alderton is about 5 miles north-east of Felixstowe, in Suffolk. Customers in Alderton get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Alderton is one of 731 places in Suffolk where we work. Our jobs stretch from Alderton to London (about 74 miles away).
Postcode districts we cover here: IP12. That includes homes on The Street, Beach Lane and Mill Hoo. Neighbouring places we cover include Bawdsey (1 mile south), Hollesley (2 miles north), Ramsholt (2 miles west), Shottisham (2 miles north-west) and Stores Corner (3 miles north). We also work in nearby towns such as Ipswich (11 miles west), Felixstowe (5 miles south-west), Kesgrave (8 miles west), Woodbridge (7 miles north-west), Stoke (11 miles west) and Maidenhall Estate (12 miles west).
Near you in Alderton
Locally, our jobs take us to homes close to Church of St Andrew. Alderton’s nearest station is Felixstowe station, roughly 4.9 miles south-west. Other landmarks nearby include Bawdsey Radar (2.2 miles south) and Martello Tower R (4.9 miles south-west). For a walk, there’s Deben Estuary SSSI.
Bath repair in Alderton, done in place
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Our repair technicians work on acrylic, whirlpool & spa baths and cast iron enamel, and common reasons people contact us are chips on the rim or sides and rust by the waste and overflow.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.
- Area
- Alderton (IP12)
- Area hub
- Suffolk
- Cover
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
When a repair isn’t the answer
Not everything can be repaired, and we would rather say so up front. We can’t fix:
- Cracks in parts of an acrylic bath we can’t get to from below
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Leaks from the waste or overflow fittings (a plumber’s job)
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
What happens on the day
You do not need to empty the room beforehand. Everything we use comes in the van with us, lay protective sheets and get going once we have agreed what we’re doing. It usually takes two to three hours for most chips, and you can get on with other things while we are there.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Ensure the room can be ventilated
- Keep a parking space free if you can
How to get a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Advice
Repairs by material
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Common problems we fix in Alderton
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, and the damage isn’t always spotted until later. Snagging repairs like these are a regular job for us.
Clients typically contact us about:
- Impact holes in acrylic
- Scuffs and scratches in the surface
- Damage beneath the taps
- An old repair that has yellowed or come loose
Comparing quotes
- The length of the guarantee and what it covers
- What prep work is covered
- What aftercare is recommended
- How the room is protected while they work
Alderton questions
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and you’ll get one combined price.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Is a cracked acrylic bath repairable?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
Will the repair show?
On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Is there any odour?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
What happens next?
We come back with a fixed quote. You are under no obligation.
Keeping it looking good
So the finish stays in good condition:
- Don’t leave a fresh chip for long
- Keep abrasive pads and gritty cleaners away from the bath
- Check that an acrylic bath does not move when you stand in it
- Store metal items away from the bath
Give the repair the full curing time we recommend before using the bath. After that, gentle cleaning keeps it looking good.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
Places near Alderton
More services for Alderton
What bath repair costs
Prices start from £95. You won’t pay by the hour. The price is based on:
- The type of damage
- The size and number of damaged areas
- How easy the damage is to reach
- Whether we combine several jobs
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Quotes from your photos
A couple of clear pictures is all it takes. Try to include:
- A clear, close picture of the problem area
- What it’s made of, if you know
- Your postcode, so we can check dates
- A coin beside the damage so we can judge size
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
