Walsall · England
Bath Repair for Aldridge homes
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Aldridge, with a one-year guarantee on every repair.
- Repairs from £95
- Rust spots around the plughole
- Scratches you can feel with a fingernail
How we handle bath repair in Aldridge
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. Typical jobs include chips along the edge of the bath and a failed DIY repair that’s discoloured or lifting, across acrylic, roll-top & freestanding and pressed steel enamel.
Whatever the size of the job, you get the same one-year guarantee in Aldridge and across Walsall.
- Area
- Aldridge (WS9)
- Area hub
- Walsall
- Guarantee
- 12 months on all our work
- Quote
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
The process
We work cleanly and quietly. We protect the area first, then the work takes two to three hours for most chips. Before we leave, we explain the curing time and the aftercare.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Mention any earlier repairs or resurfacing
- Keep a parking space free if you can
How to get a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Read more
How to care for the repair
Much of the damage we repair could have been avoided. A few tips:
- Get a dripping tap fixed promptly
- Use a soft cloth and washing-up liquid for everyday cleaning
- Keep abrasive pads and gritty cleaners away from the bath
- Ensure an acrylic bath is firm underfoot
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath, avoiding abrasives.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
Landlords, agents and businesses in Aldridge
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
About Aldridge
Aldridge is about 3 miles north-east of Walsall, in Walsall. We visit clients in Aldridge, so there is no workshop to go to. We work in all 39 towns and villages in Walsall, from the larger towns to small villages. We work right across the region, from Aldridge to Birmingham (about 9 miles away).
We work across the WS9 postcode area and the streets around it. Jobs here include addresses on High Street, The Square and Station Road and the roads around them. You will find Aldridge on the A454 and B4151, so it’s easy for us to reach. Close by, we cover Leighswood (1 mile north), Stubber's Green (1 mile north-west), Vigo (1 mile north), Rushall (2 miles west) and Walsall Wood (2 miles north). We also work in nearby towns such as Walsall (3 miles south-west), Willenhall (5 miles west), Bloxwich (3 miles west), Brownhills (3 miles north), Caldmore (3 miles south-west) and Pelsall (3 miles north-west). Being one of Walsall’s larger places, Aldridge sees plenty of our work.
Around Aldridge
Our clients here include homes close to St Francis of Assisi Catholic Technology College, St. Mary's Church and Leighswood School and the streets around them. The closest station to Aldridge is Blake Street station, about 3.1 miles east. Other landmarks nearby include Bloxwich Hospital (3.7 miles west) and Kingstanding Shopping Centre (4 miles south). Green spaces nearby include Bourne Pool and Barr Beacon.
Why repair rather than replace?
Many people think a damaged bath means a new one. In most cases it does not: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Our bath repair starts from £95. A repair is priced on what needs doing, not your postcode. You will see the full price before you book, with no extras added later.
Why Aldridge clients choose us
- We’ll tell you if it’s not worth repairing
- No need to remove anything
- No extra charge for your area
- Colour-matched on site
Take a look at our pricing and resurfacing vs replacement cost guide.
Common problems we fix in Aldridge
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal will start to rust.
Typical reasons for a call-out include:
- Impact holes in acrylic
- An old repair that has yellowed or come loose
- Chips under the taps
- Chips caused by builders
Comparing quotes
- How the colour is matched
- Whether there are any call-out or travel charges
- What prep work is covered
- How to look after the finish
When a repair isn’t the answer
Not everything can be repaired, and we’d rather say so up front. Repairs won’t solve:
- Leaking fittings, which need a plumber
- Cracks in parts of an acrylic bath we can’t get to from below
- A whole bath that is dull or worn, where a full re-enamel is the better fix
Not sure? Send photos and we will give you a straight answer.
What we work on
- Pressed steel enamel
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
What your bath is made of matters
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
Towns and villages near Aldridge
Also in Aldridge
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
Your questions about bath repair in Aldridge
What happens once I’ve sent photos?
You will get a fixed quote back. You are under no obligation.
Do you charge for travel?
We don’t add a call-out fee. The fixed quote covers the visit and the work.
What do you need from me?
Send photos through the quote form or call 0345 017 0787, and we will take it from there.
Can you repair a hole in a bath?
In most cases. Send us a picture of the hole and one from under the bath if you can.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.
Can you redo an old repair?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
What if the damage is worse than the pictures show?
Your quote covers the damage in the photos. If there is more, we’ll tell you before starting.
About our accreditations · Every repair comes with a one-year guarantee.
