Walsall · England

Bath Repair in Walsall

We travel to Walsall for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.

  • Repairs from £95
  • Rusty patches near the plughole
  • A failed DIY repair that is discoloured or lifting
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Walsall

What we do, step by step

You do not need to empty the room. We bring everything we need with us, lay protective sheets and get going once we’ve agreed what we are doing. Most jobs take a few hours, depending on the damage, and you can get on with other things while we are there.

  1. We protect the bath and the floor around it.
  2. The damaged area is cleaned, keyed and degreased.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We tidy up and tell you when the bath can be used, normally the day after.

Getting ready for the visit

  • Clear the area around the damage
  • Ensure the area is dry
  • Ensure the room can be ventilated

How to get a price

Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed quote back. Quotes are free and you’re under no obligation.

Send pictures for a quote

Read more

Bath repair in Walsall without replacing anything

Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. We work on cast iron enamel, roll-top & freestanding and acrylic, and the jobs we see most are chips on the rim or sides and impact holes in acrylic.

All our work is covered by our one-year guarantee, wherever you are in Walsall.

Where
Walsall (WS2, WS1, WS5, WS4)
Area hub
Walsall
Guarantee
12 months on all our work
Quotes
From £95. Free, fixed quote from pictures
Call
0345 017 0787
Last updated
23 October 2026
Before and after: a damaged acrylic bath corner repaired in place

Different materials, different repairs

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.

What bath repair costs

Repairs from £95. A fixed quote means you know the cost before you book. We take into account:

  • Unusual colours or finishes
  • How many areas need work
  • Where the damage is and how we get to it
  • The material and finish

No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

Send pictures for a quote

Almost every job we do is priced from pictures. This is what to send:

  • Good light, ideally daylight, without flash glare
  • Your postcode, so we can check dates
  • One sharp close-up of the damage
  • Any earlier repairs or coatings

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.

Can I fix it myself?

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

Walsall questions

Can you repair something that’s been repaired before?

Yes, we frequently do. It can add a little time, which we include in the quote.

What about rust by the waste?

Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.

Will the repair show?

The goal is a repair that blends in. The rest of the bath’s condition makes a difference.

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as homeowners in Walsall.

Do you repair coloured baths?

Yes. We mix the colour on the day to match, including pastel and older colours.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

I tried a repair kit. Can you fix it?

Yes. We take out the old repair and do it properly. Mention it when you send pictures.

What areas do you cover?

Everywhere in the UK, Walsall included. Travel is included in the price.

Should you replace it?

A new bath brings a chain of other jobs: tiles along the rim usually crack when it comes out, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Prices start from £95. The price reflects the work involved, not your postcode. The full price is agreed before you book.

Why choose Surface Doctor in Walsall

  • Most jobs done in one visit
  • A fixed quote before you book
  • We’ll tell you if it’s not worth repairing
  • Accredited with CHAS, Constructionline and SafeContractor

Read our pricing and bath cost comparison.

What a repair can’t fix

Not everything can be repaired, and we will tell you before we start. Repairs won’t solve:

  • Acrylic cracks with no access behind them
  • Flexing caused by a failed cradle or loose feet
  • Metal that has corroded all the way through

Not sure? Send pictures and we will give you a straight answer before booking.

What we work on

  • Whirlpool & spa baths
  • Pressed steel enamel
  • Roll-top & freestanding
  • Acrylic
  • Cast iron enamel

Aftercare tips

A little care keeps the finish looking good. We recommend:

  • Give the bath a quick rinse after use
  • Stick to mild cleaners and a soft cloth
  • Check that an acrylic bath does not move when you stand in it
  • Get a dripping tap fixed promptly

Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.

If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and it can start to leak underneath.

Our work in Walsall

Walsall is about 6 miles east of Wolverhampton, in Walsall. We work in every kind of home, old or new, large or small, plus businesses and rented homes. We cover 39 places in Walsall. Our jobs stretch from Walsall to Birmingham (8 miles away).

We cover every part of WS2, WS1, WS5 and WS4. Local streets include Gallery Square, New Street and St Matthew's Close. Walsall sits on or near the A34 and A454, which makes travel easy. We also travel to Highgate (1 mile south), Caldmore (1 mile south-west), Chuckery (1 mile north-east), Palfrey (1 mile south-west) and Bescot (1 mile south-west). We also work in nearby towns such as Willenhall (3 miles west), Bloxwich (3 miles north), Brownhills (5 miles north-east), Aldridge (3 miles north-east), Pelsall (3 miles north) and Turnberry Estate (4 miles north-west).

Around Walsall

Our clients here include homes close to Blue Coat Church of England Academy, Walsall Arboretum and Blue Coat Church of England Academy, among other places. You’ll also find Dog and Partridge pub (under half a mile south), Blue Coat Church of England Aided Infant School (less than half a mile east) and Church of St Matthew (less than half a mile north). Walsall has its own railway station: Walsall station. A little further out are Jerome K Jerome Birthplace Museum (less than half a mile north-west) and Walsall Castle (0.9 miles west). For a walk, there is Gorse Farm Wood and Pouk Hill.

Map of Walsall © OpenStreetMap contributors

What we are called out for in Walsall

Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, frequently before anyone notices. Snagging repairs like these are a regular job for us.

Signs it’s time to call us include:

  • Chips on the rim or sides
  • Hairline or through cracks in acrylic
  • Damage beneath the taps
  • Chips caused by builders

What to look for in a quote

  • How to care for the finish
  • Whether the price is fixed and includes VAT
  • Who will actually do the work
  • Whether the colour is mixed to match

10 questions to ask before booking

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.