Neath Port Talbot · Wales
Bath Repair for Alltwen homes
Damaged bath in Alltwen? We repair it in place, match it on site and guarantee the work for a year.
- Repairs from £95
- Snagging damage from a refit
- Deep scratches in acrylic
Aftercare tips
Most damage we see is avoidable. A few tips:
- Keep abrasive pads and gritty cleaners away from the bath
- Get any new chip repaired before it rusts
- Store metal items away from the bath
- Rinse the bath after use, especially in hard water areas
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust can start.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
Bath repair in Alltwen, done in place
You don’t need a new bath because of a chip. Our repair technicians fill, shape and refinish the damage, mixing the colour on the day. We regularly repair whirlpool & spa baths, pressed steel enamel and roll-top & freestanding, and common reasons people get in touch are damage beneath the taps and a cracked acrylic bath.
Big or small, it’s backed by a one-year guarantee in Alltwen and across Neath Port Talbot.
- Area
- Alltwen (SA8)
- Region
- Neath Port Talbot
- Cover
- One year on every repair
- Quote
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairs by material
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Alltwen: your questions answered
Something went through my bath. Can it be fixed?
In most cases. Send us a photo of the hole and one from under the bath if you can.
What information do you need?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Can you repair a chip on a coloured bath?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Can I get a quote without a visit?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
How long does the repair take to cure?
Typically the following day. We confirm the time before we leave.
What happens next?
We look at the pictures and reply with a fixed quote and some dates. If we need another angle, we will ask.
Work for landlords and builders
We work for landlords, letting agents and housing providers in Alltwen as well as householders. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Repair or replace in Alltwen?
People frequently assume a cracked or chipped bath has to come out. In most cases it does not: a proper repair gives it years more use, without the cost and upheaval of replacing it. Prices start from £95. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before you book.
Why book with us
- Colour-matched on site
- Dust sheets down, tidy finish
- Fixed prices from your pictures
- A year’s guarantee on all work
Take a look at our pricing and guide to resurfacing and replacement costs.
How the visit works
Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. Most visits take two to three hours for most chips, and the room is left clean and tidy.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can usually use the bath the next day.
How to prepare
- Point us to the nearest place to park
- Mention any earlier repairs or resurfacing
- Let us know which floor the room is on
How to get a price
If you’re in Alltwen and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
When we’d advise against a repair
Before you book, it’s worth knowing the limits too:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- A bath that moves underfoot, until its support is fixed
- Acrylic cracks with no access behind them
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
Places near Alltwen
Other services in Alltwen
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
What we’re called out for in Alltwen
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
Common reasons people in Alltwen contact us include:
- Chips caused by builders
- Chips on the rim or sides
- Scuffs and scratches in the surface
- A cracked acrylic bath
Comparing quotes
- Aftercare advice
- Whether the price is fixed and includes VAT
- How soon you can use it again
- Whether a trained technician does the job
Alltwen and the surrounding area
Alltwen is about 4 miles north of Neath, in Neath Port Talbot. Wherever you are in the SA8 postcode area, we carry out the work at your property. Alltwen is one of 100 towns and villages in Neath Port Talbot where we work.
Our technicians cover all of SA8 and the streets around it. Streets in the area include High Street, Gwyn's Place and Alltwen Hill, all of which we cover. Other places close to Alltwen include Rhos (1 mile east), Pontardawe (1 mile north-west), Gellinudd (1 mile north-east), Craig Llangiwg (1 mile north) and Trebannws (1 mile west). Further out, we also cover Neath (4 miles south), Port Talbot (9 miles south), Sandfields (9 miles south), Mount Pleasant (4 miles south), Baglan Moors (8 miles south) and Sandfields West (8 miles south).
Local landmarks in Alltwen
In Alltwen, that means homes near Cwmtawe Community School, Gwyn Arms and Alltwen Primary School. Nearby too are St Peter's Church (0.5 miles north-west) and Cwmtawe Community School (within half a mile west). The nearest railway station is Skewen station, roughly 3.7 miles south of the centre. Further afield, we also cover the area around Gellinudd Hospital (0.8 miles north-east) and Welsh Museum of Fire (3.7 miles south). Green spaces nearby include Cwm Clydach RSPB Reserve and Pen Alltwen.
About our accreditations · Every repair comes with a one-year guarantee.
