Neath Port Talbot · Wales

Bath Repair for Craig Llangiwg homes

Fixed-price bath repair in Craig Llangiwg and the surrounding area, typically in one visit.

  • Repairs from £95
  • Deep scratches in acrylic
  • Impact holes in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Craig Llangiwg

Bath repair at your home in Craig Llangiwg

Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. We work on roll-top & freestanding, acrylic and pressed steel enamel, and common reasons people contact us are impact holes in acrylic and chips along the edge of the bath.

We stand behind the work with a one-year guarantee, so you’re covered after the visit.

Before and after: a chipped, rust-stained bath around the plughole
Where
Craig Llangiwg (SA8, SA9)
County
Neath Port Talbot
Guarantee
A year, on every repair
Quotes
From £95. Fixed and free, based on photos
Phone
0345 017 0787
Last updated
23 October 2026

Should you replace it?

Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and replacing like for like is not cheap. Repairing it leaves it where it is. Prices start from £95. Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

What you get with us

  • Usually one visit, start to finish
  • Colour mixed on the day to match
  • Every repair guaranteed for a year
  • Nothing taken out or refitted

See our full price list or bath cost comparison.

Can I fix it myself?

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.

We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

Common questions in Craig Llangiwg

Can rust on a bath be repaired?

Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.

What happens if you find more damage?

The price is fixed for what the pictures show. Anything extra is discussed before we begin.

Can you match an avocado or pink bath?

Yes. We mix the colour on the day to match, including older coloured suites.

Do you cover Craig Llangiwg?

Yes. We work across the UK and travel to Craig Llangiwg and the rest of Neath Port Talbot. Send us pictures for a fixed quote, or call 0345 017 0787.

When can I have a bath again?

Normally by the following day, though it depends on what we have done.

Is there a call-out fee?

We don’t add a call-out fee. The fixed quote covers the visit and the work.

Is it messy?

Dust sheets and masking go down before we start, and we clean up when we have finished.

Is there any odour?

A little, depending on the job. Open windows and an extractor fan help.

Looking after it afterwards

Most damage we see is avoidable. A few tips:

  • Protect the bath with a towel when doing jobs nearby
  • Give the bath a quick rinse after use
  • Keep metal cans and razors off the surface
  • Don’t scrub with anything abrasive

Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.

Small chips are quick to repair. Left alone, they stain and can rust, so it’s worth getting them done early.

Craig Llangiwg and nearby

Craig Llangiwg is about 5 miles north of Neath, in Neath Port Talbot. We visit customers in Craig Llangiwg, so you don’t need to take anything anywhere. Our technicians cover 100 places in Neath Port Talbot.

We cover every part of the SA8 and SA9 postcode area. From New Road, Old Road and Grove Road or anywhere nearby, we can come to you. Other places close to Craig Llangiwg include Ynysmeudwy (1 mile north-east), Pontardawe (1 mile west), Llan-giwg (1 mile north-west), Gellinudd (1 mile south-east) and Cilybebyll (1 mile east). Larger places within reach include Neath (5 miles south), Port Talbot (9 miles south), Sandfields (9 miles south), Mount Pleasant (5 miles south), Baglan Moors (9 miles south) and Sandfields West (9 miles south).

Around Craig Llangiwg

Around Craig Llangiwg, we work in homes near Cwmtawe Community School, Church of Saint Ciwg and Ivy Bush Hotel and the streets around them. Also close by are Llangiwg Primary School (under half a mile south-west) and Cwmtawe Community School (1 mile south-west). The nearest railway station is Skewen station, roughly 4.6 miles south. Other landmarks nearby include Gellinudd Hospital (0.5 miles south-east) and Cae Castell (2.2 miles west). For a walk, there’s Pen Alltwen and Cwm Clydach RSPB Reserve.

Map of Craig Llangiwg © OpenStreetMap contributors

What we can’t put right

Not everything can be repaired, and we will tell you before we start. Repairs won’t solve:

  • Leaking fittings, which need a plumber
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • Cracks in parts of an acrylic bath we can’t get to from below

Not sure? Send pictures and we’ll give you a straight answer.

Surfaces we repair

  • Pressed steel enamel
  • Acrylic
  • Whirlpool & spa baths
  • Cast iron enamel
  • Roll-top & freestanding

Signs you need bath repair in Craig Llangiwg

The usual cause is something heavy dropped into the bath, and building work is a common culprit. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.

People generally call us when they notice something like this:

  • A cracked acrylic bath
  • Rust by the waste and overflow
  • A chip where the taps sit
  • Holes from dropped items

What your quote should include

  • Who will actually do the work
  • How long the guarantee is and what it covers
  • How long it needs to cure
  • A fixed quote, and whether VAT is included

How to compare quotes

Different materials, different repairs

Composite and resin

Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

How it works

Once we are through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes a few hours, depending on the damage, depending on what we find, and we finish with a tidy-up and a look at the finished work together.

  1. First, we check the damage against your photos and agree the plan.
  2. Any rust and loose material comes out, and the area is degreased.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

Preparing for the visit

  • Make sure the room can be ventilated
  • Ensure the area is dry
  • Let us know which floor the room is on

Getting a price

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.

Get a free quote

Related advice

Work for landlords and builders

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

If you manage property in Craig Llangiwg, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.