Lincolnshire · England
Bath chip & crack repair in Anderby Creek, Lincolnshire
Problem with your bath in Anderby Creek? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Hairline or through cracks in acrylic
- A kit repair that didn’t last
Bath repair at your home in Anderby Creek
We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath. You can typically use the bath the day after. Our technicians work on roll-top & freestanding, acrylic and whirlpool & spa baths, and the jobs we see most are a chip where the taps sit and a chipped rim or side.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Anderby Creek (PE24)
- Region
- Lincolnshire
- Cover
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How it works
Visits start with a quick look at the job together. Then the area is sheeted and masked and the work begins. It normally takes a few hours, and we’ll tell you if anything changes.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, typically the next day.
Preparing for the visit
- Tell us if there are stairs or a lift
- Clear toiletries, mats and anything else from around the area
- Open a window if you can
Getting a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Read more
Nearby places to Anderby Creek
What else we do in Anderby Creek
When we would advise against a repair
We would rather lose a job than do one that won’t last, so here’s what a repair can’t put right:
- Cracks in acrylic we can’t reach from underneath
- A steel bath rusted through
- Water coming from the waste or taps rather than the bath
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
Repair or replace in Anderby Creek?
Many people think a damaged bath means a new one. In most cases it doesn’t: a proper repair gives it years more use, without the cost and upheaval of replacing it. Our bath repair starts from £95. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Why us?
- No extra charge for your area
- We come to you, anywhere in the UK
- Fixed prices from your pictures
- Colour mixed on the day to match
Take a look at our prices page and guide to resurfacing and replacement costs.
When to call us in Anderby Creek
Acrylic baths that crack nearly always have a support problem. Legs that are not adjusted, a missing cradle or a soft floor let the bath move until the acrylic gives way.
Clients normally contact us about:
- Scratches you can feel with a fingernail
- Damage done while the bathroom was being fitted
- A hole punched through by something heavy
- Chips under the taps
What to look for in a quote
- What the guarantee covers, and for how long
- Whether there are any call-out or travel charges
- How long it needs to cure
- Whether a trained technician does the job
What affects the price in Anderby Creek
Prices start from £95. We give every job a fixed price from pictures. This is what makes a difference:
- Access to the area
- How many areas need work
- Doing more than one item at once
- Previous DIY repairs that have to come out
Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access.
Quotes from your photos
Good pictures mean an accurate price. Here’s what we find most useful:
- Details of any past repairs
- Any details about the material
- Your postcode, so we can check dates
- Natural light rather than flash
To get a price, send a couple of photos through our quote form or call us. We’ll say right away if a repair is the right fix.
Different materials, different repairs
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour matched, just like other baths.
Anderby Creek and nearby
Anderby Creek is about 8 miles north of Skegness, in Lincolnshire. Our technicians come to homes and businesses in Anderby Creek, so you don’t need to take anything anywhere. Anderby Creek is one of 732 towns and villages in Lincolnshire where we work.
Jobs in PE24 are booked in the same way as anywhere else. Streets in the area include Lakeside, Sandy Lane and Grace Crescent, all of which we cover. Nearby, we also work in Anderby (1 mile west), Authorpe Row (2 miles south-west), Huttoft (2 miles west), Mumby (2 miles south-west) and Hogsthorpe (3 miles south). Further out, we also cover Louth (15 miles north-west), Skegness (8 miles south), Mablethorpe (6 miles north-west), Sutton on Sea (4 miles north-west), Spilsby (11 miles south-west) and Alford (6 miles west).
Your questions about bath repair in Anderby Creek
Can you match an avocado or pink bath?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
Do you cover Anderby Creek?
Yes. We work across the UK and come to Anderby Creek. Send us pictures for a fixed quote, or call 0345 017 0787.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you quote from pictures?
Typically, yes. A close-up and a wider photo are enough to give a fixed quote.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
How much does bath repair cost in Anderby Creek?
Prices start from £95. Every job gets a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Is a bath repair permanent?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Looking after it afterwards
Once the work has cured, treat it gently:
- Ensure an acrylic bath is firm underfoot
- Don’t leave razors or cans standing in the bath
- Have new chips seen to early
- Protect the bath with a towel when doing jobs nearby
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
About our accreditations · Every repair comes with a one-year guarantee.
