Lincolnshire · England
Bath chip & crack repair in Anderby, Lincolnshire
Bath repair across Anderby and nearby, typically in one visit and guaranteed for a year.
- Repairs from £95
- Scratches you can feel with a fingernail
- Chips under the taps
Bath repair at your home in Anderby
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath and the tiles around it. You can normally use the bath the next day. Typical jobs include rusty patches near the plughole and damage beneath the taps, across roll-top & freestanding, acrylic and cast iron enamel.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Where
- Anderby (PE24)
- County
- Lincolnshire
- Warranty
- 12 months on all our work
- Quote
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Should you replace it?
Many people think a damaged bath means a new one. Normally it doesn’t: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Prices start from £95. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why book with us
- No need to remove anything
- No extra charge for your area
- CHAS, Constructionline and SafeContractor accredited
- Fixed prices from your pictures
Read our full price list and resurfacing vs replacement cost guide.
When a repair is not the answer
To be straight with you, there are a few things a repair will not fix:
- Cracks in parts of an acrylic bath we cannot get to from below
- Leaking fittings, which need a plumber
- A bath worn all over, where resurfacing makes more sense
If in doubt, send photos and we will say what we think before you book.
Surfaces we repair
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
Common questions in Anderby
Will the repair show?
On a glossy bath, you’ll struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can you repair a crack in an acrylic bath?
Typically, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a picture.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Can you repair several things at once?
Of course, and it generally saves money. Send pictures of everything together and you’ll get one combined price.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Anderby and the surrounding area
Anderby is about 8 miles north of Skegness, in Lincolnshire. Customers in Anderby get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Anderby is one of 732 places in Lincolnshire where we work.
We work across PE24 and the streets around it. From Pinfold Lane, Sea Road and Roman Bank or a nearby road, a technician can come to you. Nearby, we also work in Anderby Creek (1 mile east), Huttoft (2 miles west), Authorpe Row (2 miles south), Mumby (2 miles south-west) and Helsey (2 miles south-west). We also work in nearby towns such as Louth (15 miles north-west), Skegness (8 miles south), Mablethorpe (6 miles north), Sutton on Sea (4 miles north), Spilsby (10 miles south-west) and Alford (5 miles west).
Local landmarks in Anderby
Around Anderby, we work in homes near Church of St Andrew. Nearby you’ll also find Alford and District War Memorial Cottage Hospital (5.6 miles west).
What happens on the day
We agree an arrival time beforehand, so you know when to expect us. On site, it takes two to three hours for most chips in most cases. We leave the room clean and ready to use once it has cured.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Let the surface dry out before the visit
- Tell us if there are stairs or a lift
- Keep pets and children out of the room while we work
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. You will get a fixed price, not an estimate.
Advice
What we are called out for in Anderby
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
These are the problems we are asked about most:
- An old repair that has yellowed or come loose
- A cracked acrylic bath
- Rust spots around the plughole
- Damage done while the bathroom was being fitted
Questions to ask before booking
- What prep work is covered
- A fixed price, and whether VAT is included
- How your room will be protected
- When it can be used again
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
What affects the price in Anderby
Prices start from £95. There’s no charge for travel to Anderby. The price depends on:
- What kind of damage it is
- The colour and finish to match
- The material and finish
- The size and number of damaged areas
There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from pictures
The better the photos, the more accurate the price. Here’s what we find most useful:
- A close-up of the damage, in focus
- Something in shot to show the size
- Daylight if possible, and no flash reflection
- Details of any past repairs
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.
Keeping it looking good
Aftercare is simple, and it makes a real difference:
- Keep abrasive pads and gritty cleaners away from the bath
- If an acrylic bath flexes, have its feet adjusted
- Use a soft cloth and washing-up liquid for everyday cleaning
- Store metal items away from the bath
Do not leave razors, cans or hair grips in the bath, as they can leave rust marks. And fix dripping taps promptly.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
Also near Anderby
Other services in Anderby
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
About our accreditations · Every repair comes with a one-year guarantee.
