Highland · Scotland
Bath Repair for Applecross homes
Our repair technicians come to Applecross for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Cracks in an acrylic bath
- Deep scratches in acrylic

Bath repair in Applecross without replacing anything
Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it’s level with the surrounding surface. If you’re dealing with deep scratches in acrylic and an old repair that has yellowed or come loose, we can help.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Applecross (IV54)
- Area hub
- Highland
- Guarantee
- A year, on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026

FAQs for Applecross
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Can you repair a crack in an acrylic bath?
Usually, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a picture.
Is there a guarantee?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Will the repair last?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Will I be able to see the repair?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath.
Can you fix rust around the plughole?
Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.
Can tenants book a repair?
Yes. Ask your landlord first, and we can send them the quote if that helps.
How long before I can use the bath?
Normally by the following day, though it depends on what we’ve done.
How the visit works
We agree an arrival time beforehand, so you know when to expect us. Once we are there, the work takes a few hours in most cases. We leave the room clean and ready to use once it has cured.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the day after.
Preparing for the visit
- Keep a parking space free if you can
- Make sure the area is dry
- Tell us about any previous repairs or coatings
How to get a price
The quickest way to a price is to send a couple of photos through our quote form or ring us. We’ll say immediately if a repair is the right fix.
Advice
Prices and what affects them
Prices start from £95. Each job gets its own fixed quote. These are the things that affect it:
- The material
- Whether it’s a chip, crack, burn or wear
- Previous DIY repairs that have to come out
- Doing more than one item at once
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Getting a price from photos
Almost every job we do is priced from pictures. This is what to send:
- Details of any past repairs
- One sharp close-up of the damage
- Something in shot to show the size
- A wider photo showing the entire bath
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- A bath worn all over, where resurfacing makes more sense
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Cracks in acrylic we cannot reach from underneath
Not sure? Send pictures and we’ll give you a straight answer before booking.
What we work on
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Cast iron enamel
Landlords, agents and businesses in Applecross
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
What we are called out for in Applecross
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
Most people get in touch after spotting something like this:
- A failed DIY repair that is discoloured or lifting
- A hole punched through by something heavy
- Hairline or through cracks in acrylic
- Chips caused by builders
What your quote should include
- What prep work is covered
- How to care for the finish
- When it can be used again
- Whether there are any call-out or travel charges
Our work in Applecross
Applecross is in Highland. Anywhere in IV54, a technician comes to you. Applecross is one of 253 places in Highland where we work.
Here we cover the IV54 postcode area. We regularly work on streets such as Shore Street and Craite Barn. Neighbouring places we cover include Miltown (1 mile south), Plockton (9 miles south-east), Shieldaig (9 miles north-east), Drumbuie (9 miles south-east) and Erbusaig (10 miles south-east). Within a short drive, we also cover Portree (14 miles west), Kyle of Lochalsh (11 miles south) and An t-Àth Leathann (14 miles south). If you are somewhere remote, ring us first and we’ll plan the trip.
Local landmarks in Applecross
In Applecross, that means homes near Old Parish Church, among other places. Further afield, we also cover the area around Applecross Heritage Centre (0.9 miles north).
Repairing versus replacing in Applecross
Swapping a damaged bath for a new one normally involves a plumber, lifting out the old bath, re-tiling and a new panel and disposing of the old one. A repair deals only with the damage in one visit. Repairs from £95, with every job priced individually. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Why book with us
- A fixed quote before you book
- A year’s guarantee on all work
- Same prices wherever you are
- Straight answers about what a repair can do
Take a look at our prices page and resurfacing vs replacement cost guide.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
How to look after the repair
It’s all simple stuff:
- Rinse it down after each bath
- If an acrylic bath flexes, have its feet adjusted
- Have new chips seen to early
- A dripping tap stains enamel, so fix it early
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath, avoiding abrasives.
Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
What else we do in Applecross
About our accreditations · Every repair comes with a one-year guarantee.

