Highland · Scotland
Bath chip & crack repair in Armadale, Highland
Our technicians come to Armadale for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- A kit repair that didn’t last
- Chips caused by builders
Common questions in Armadale
Can you quote from photos?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
What areas do you cover?
Across the UK, so Armadale is covered. Prices don’t change with location.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Armadale.
How invisible is a bath repair?
On a bath in good condition, a colour matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
How do I book?
Photos of the damage, a picture of the whole bath and your postcode. Then we will agree a date.
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
Can you repair a hole in a bath?
Normally. Photos of the hole and the underside help us check.
What does bath repair cost?
Repairs from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.
About our bath repair in Armadale
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. Nothing is unplumbed, your tiles stay as they are, and the repaired area is colour-matched so it blends in. Whether it’s cracks in an acrylic bath and a chip where the taps sit, we can typically put it right.
Whatever the size of the job, it’s backed by a one-year guarantee in Armadale and across Highland.
- Area
- Armadale (IV45)
- Region
- Highland
- Guarantee
- A year, on every repair
- Quote
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
For landlords and businesses
For anyone letting property in or around Armadale, we’ll quote for several properties at once. Just send photos for each address and we’ll price them together.
We carry out planned and one-off repairs for housing associations and facilities teams in Highland and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Aftercare tips
A little care keeps the finish looking good. We recommend:
- Stick to mild cleaners and a soft cloth
- Store metal items away from the bath
- Rinse the bath after use, especially in hard water areas
- Don’t scrub with anything abrasive
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust can start.
Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
What your bath is made of matters
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour matched, just like other baths.
Common problems we fix in Armadale
Heavy toiletries are the biggest single cause of chips, closely followed by shower heads. Fittings cause damage too: water collects there, so chips nearby rust quickly.
Customers typically contact us about:
- Rust spots around the plughole
- Chips along the edge of the bath
- Cracks in an acrylic bath
- Impact holes in acrylic
What your quote should include
- Whether they match the colour on site
- What prep work is covered
- The length of the guarantee and what it covers
- Whether the price is fixed and includes VAT
When we’d advise against a repair
Some jobs aren’t right for a repair, including:
- A bath worn all over, where resurfacing makes more sense
- A bath that moves underfoot, until its support is fixed
- Water coming from the waste or taps rather than the bath
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
What happens on the day
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we’ll take it from there. Most visits take a morning or an afternoon, tidy-up included.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, usually the following day.
Preparing for the visit
- Point us to the nearest place to park
- Clear toiletries, mats and anything else from around the area
- Ensure the room can be ventilated
How to get a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote.
Advice
DIY kit or professional repair?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
How we price bath repair
Repairs from £95. Quotes are free and the price is fixed. What we look at:
- Doing more than one item at once
- Previous DIY repairs that have to come out
- How easy the damage is to reach
- Unusual colours or finishes
Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Getting a price from pictures
Before you send pictures, these tips help us give you a firm price:
- The material, if you know it
- A wider photo showing the whole bath
- Whether it’s been repaired or coated before
- A coin beside the damage so we can judge size
Send us a photo of the damage and one of the entire item, with your IV45 postcode, and we will come back with a fixed quote.
Covering Armadale
Armadale (Gaelic: Armadail) is in Highland. Our repair technicians come to clients in Armadale and the surrounding area, so nothing has to leave your home. Armadale is one of 253 places in Highland where we work.
Our visits in IV45 work the same way as everywhere else we cover. Whether you live on Allt A'tuath and Rathad na Chidhe or anywhere nearby, we can come to you. We also cover the places around Armadale: Ardvasar (1 mile south-west), Kilbeg (2 miles north-east), Mallaig (5 miles south-east), Morar (7 miles south-east) and Glenancross (8 miles south). For island and remote addresses, ring us first and we’ll plan the trip.
Landmarks near Armadale
The closest station to Armadale is Mallaig station, about 4.9 miles south-east of the centre. Further afield, we also cover the area around Museum of the Isles (under half a mile north) and Armadale Castle (0.5 miles north). Green spaces nearby include Loch Ic Iain and Sgùrr nan Caorach.
What else we do in Armadale
About our accreditations · Every repair comes with a one-year guarantee.
