Highland · Scotland
Bath chip & crack repair in Kilbeg, Highland
Bath repair across Kilbeg and nearby, normally in one visit and guaranteed for a year.
- Repairs from £95
- A failed DIY repair that’s discoloured or lifting
- Cracks in an acrylic bath
About our bath repair in Kilbeg
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in one visit. We’re often asked to fix snagging damage from a refit and damage beneath the taps, on roll-top & freestanding, whirlpool & spa baths and cast iron enamel.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Where
- Kilbeg (IV44)
- Region
- Highland
- Cover
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace in Kilbeg?
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. If the whole surface is worn, re-enamelling may make more sense, and we will tell you. Our bath repair starts from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Why choose Surface Doctor in Kilbeg
- Colour mixed on the day to match
- Rooms protected and left tidy
- Honest advice, even when it means no job
- Most jobs done in one visit
Take a look at our pricing and guide to resurfacing and replacement costs.
Our work in Kilbeg
Kilbeg is in Highland. From the centre of Kilbeg to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We work in 253 places in Highland.
We work across the IV44 postcode area and the streets around it. Nearby, we also work in Armadale (2 miles south-west), Ardvasar (2 miles south-west), Mallaig (6 miles south), Morar (8 miles south) and Glenancross (9 miles south). If you’re somewhere remote, ring us first and we’ll plan the trip.
Landmarks near Kilbeg
Locally, our jobs take us to homes close to Bun-sgoil Shlèite and Sleat Parish Church and the streets around them. Other landmarks nearby include Armadale Castle (1.2 miles south-west) and Museum of the Isles (1.3 miles south-west). The countryside around Kilbeg includes Sgùrr nan Caorach and Loch Ard.
Also in Kilbeg
When we would advise against a repair
Not everything can be repaired, and we will tell you before we start. We cannot fix:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath that moves underfoot, until its support is fixed
- Rust that has eaten right through a steel bath
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
How to care for the repair
How the surface is treated afterwards matters. Here’s what we suggest:
- Give the bath a quick rinse after use
- Cover the bath during DIY or decorating
- Have new chips seen to early
- A dripping tap stains enamel, so fix it early
Give the repair the full curing time we recommend before running a bath. After that, gentle cleaning keeps it looking good.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
Questions from Kilbeg
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you redo an old repair?
Yes, we do this frequently. We strip it out, deal with any rust and repair it again.
Will I be able to see the repair?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath, and we will tell you what to expect.
Is it safe with children and pets around?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
Is the work guaranteed?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
How long does the repair take to cure?
Typically the day after. We’ll tell you the exact curing time when we finish.
What we do, step by step
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes two to three hours for most chips. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can generally use the bath the next day.
How to prepare
- Keep pets and children out of the room while we work
- Open a window if you can
- Let the surface dry out before the visit
Getting a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Related advice
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Landlords, agents and businesses in Kilbeg
Landlords, letting agents and housing providers in Kilbeg use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
When to call us in Kilbeg
Heavy toiletries are the biggest single cause of chips, with dropped shower heads close behind. Fittings cause damage too: water collects there, so chips nearby rust quickly.
Customers generally contact us about:
- Rusty patches near the plughole
- Scuffs and scratches in the surface
- Cracks in an acrylic bath
- A hole punched through by something heavy
Before booking anyone
- Who turns up on the day
- How long it needs to cure
- Whether the colour is mixed to match
- What the guarantee covers, and for how long
Prices and what affects them
Prices start from £95. A fixed quote means you know the cost before you book. We take into account:
- Unusual colours or finishes
- Where the damage is and how we get to it
- Previous DIY repairs that have to come out
- The type of damage
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Getting a price from pictures
The better the pictures, the more accurate the price. Here’s what helps:
- Any earlier repairs or coatings
- One picture of the entire bath
- Natural light rather than flash
- A clear, close picture of the problem area
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
