Highland · Scotland
Bath Repair for Morar homes
Bath repair across Morar and nearby, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Chips caused by builders
- Chips on the rim or sides
How we handle bath repair in Morar
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Our repair technicians work on pressed steel enamel, whirlpool & spa baths and roll-top & freestanding, and people most often call us about deep scratches in acrylic and chips along the edge of the bath.
You get a one-year guarantee, the same in Morar as everywhere else we work.
- Location
- Morar (PH40)
- County
- Highland
- Cover
- One year on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Morar and the surrounding area
Morar is in Highland. Our repair technicians come to customers in Morar, so you don’t need to take anything anywhere. Morar is one of 253 towns and villages in Highland we cover.
Our visits in PH40 are booked in the same way as anywhere else. We regularly work on streets such as Rhubana View and Columba Road and the roads around them. Neighbouring places we cover include Glenancross (1 mile south-west), Mallaig (2 miles north), Arisaig (4 miles south), Ardvasar (7 miles north-west) and Armadale (7 miles north-west). For island and remote addresses, ring us first and we will plan the trip.
Near you in Morar
In Morar, that means homes near Roman Catholic Church Of St Cumin And Presbytery and Mallaig High School, among other places. There’s a railway station in Morar itself: Morar station. Other landmarks nearby include Mallaig Heritage Centre (2.5 miles north). Not far away are Loch a' Ghille Ghobaich.
Signs you need bath repair in Morar
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, frequently before anyone notices. We repair snagging damage like this regularly.
If you can see any of these, send us a photo:
- A failed DIY repair that is discoloured or lifting
- A hole punched through by something heavy
- Deep scratches in acrylic
- Chips on the rim or sides
Questions to ask before you book
- What prep work is covered
- What aftercare is recommended
- Whether a trained technician does the job
- When it can be used again
Also in Morar
DIY kit or professional repair?
If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
What affects the price in Morar
Repairs from £95. Prices are worked out job by job. What matters most is:
- Whether we combine several jobs
- Where the damage is and how we get to it
- Previous DIY repairs that have to come out
- How much damage there is
Set against the cost of replacement, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
How to get a fixed price
A couple of clear pictures is all it takes. Try to include:
- Natural light rather than flash
- Something in shot to show the size
- A wider photo showing the entire bath
- Your postcode, so we can check dates
Most customers in Morar get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
What happens on the day
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a few hours, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Tell us if there are stairs or a lift
- Move bottles, mats and clutter away from the area
- Tell us about parking, stairs or access
Getting a price
For a price in Morar, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
Aftercare tips
How the surface is treated afterwards matters:
- Don’t scrub with anything abrasive
- Fix dripping taps early to stop staining and limescale
- Have new chips seen to early
- Clean with warm water and a mild detergent
A repaired bath needs no special treatment, beyond gentle cleaning. Skip bleach and gritty creams.
Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
When we would advise against a repair
We would rather lose a job than do one that won’t last, so these are the limits:
- Flexing caused by a failed cradle or loose feet
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Acrylic cracks with no access behind them
Send us photos and we will tell you honestly before booking.
Surfaces we repair
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, just like other baths.
Why repair rather than replace?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Why book with us
- No need to remove anything
- Dust sheets down, tidy finish
- One-year guarantee on every repair
- A fixed quote before booking
Take a look at our pricing and resurfacing vs replacement cost guide.
Your questions about bath repair in Morar
Can you repair several things at once?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and you will get one combined price.
Is there any odour?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
Is the work guaranteed?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
What happens next?
We review the photos and send a fixed quote and the next dates we have.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Is a holed acrylic bath repairable?
Normally, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
About our accreditations · Every repair comes with a one-year guarantee.
