Lancashire · England
Bath Repair for Arnside homes
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Arnside, with a one-year guarantee on every repair.
- Repairs from £95
- Damage beneath the taps
- Rust spots around the plughole
What affects the price in Arnside
Repairs from £95. Prices are worked out job by job, from your pictures. The main factors are:
- Any earlier repairs that need removing first
- How many areas need work
- Where the damage is and how we get to it
- The colour and finish to match
A repair is priced on what needs doing, not your postcode. You’ll see the full price before you book, with no extras added later.
Quotes from your pictures
Two or three clear pictures are typically enough. Try to include:
- One sharp close-up of the damage
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
- A coin or ruler next to the damage for scale
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
How we handle bath repair in Arnside
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath. Most baths can be used again the following day. Whether it’s chips under the taps and damage done while the bathroom was being fitted, we can help, on cast iron enamel, pressed steel enamel and acrylic alike.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Where
- Arnside (LA5)
- Area hub
- Lancashire
- Cover
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Cracks in acrylic we can’t reach from underneath
- Leaking fittings, which need a plumber
Not sure? Send pictures and we’ll give you a straight answer.
Materials we repair
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
About Arnside
Arnside is about 9 miles north of Morecambe, in Lancashire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Arnside is one of 482 towns and villages in Lancashire where we work. Our nearest city page is Liverpool, about 55 miles away.
Postcode districts we cover here: LA5. From Station Road, Kings Close and Park View or anywhere nearby, a technician can come to you. We also cover the places around Arnside: Carr Bank (1 mile north-east), Hazelslack (1 mile east), Waterslack (1 mile south-east), Storth (1 mile north-east) and Sandside (2 miles north-east). Within a short drive, we also cover Lancaster (10 miles south), Morecambe (9 miles south), Heysham (11 miles south), Westfield War Memorial Village (10 miles south), Sandylands (10 miles south) and Carnforth (6 miles south-east).
What’s near Arnside
Typical jobs here are in homes near Ye Olde Fighting Cocks pub and St James' Church and the streets around them. There’s a railway station in Arnside itself: Arnside station. Further afield, we also cover the area around Meathop and Ulpha (2 miles north-west). The countryside around Arnside includes Leighton Moss RSPB reserve and Warton Crag.
Towns and villages near Arnside
Other services in Arnside
FAQs for Arnside
What happens if you find more damage?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Is it OK to have pets in the house?
Just keep them out of the work area. We will let you know when it’s safe to use again.
When can I have a bath again?
Normally the following day. We’ll tell you the exact curing time when we finish.
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
Which areas do you work in?
Across the UK, and that includes Arnside. Our prices are the same everywhere.
Work for landlords and builders
For anyone letting property in or around Arnside, we can repair and quote for several addresses together. Send pictures for each one and we’ll price them together.
We work for landlords, letting agents and housing providers in Arnside as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Materials and what they mean for the repair
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so repair chips early.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Why repair rather than replace?
Swapping a damaged bath for a new one normally involves a plumber, lifting out the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it deals only with the damage in one visit. Our bath repair starts from £95. We charge the same wherever you are, so there’s no premium for Arnside. What changes the price is the job itself: how much damage, what it’s made of and how many items.
What you get with us
- We leave the room as we found it
- Nothing taken out or refitted
- Same prices wherever you are
- Every repair guaranteed for a year
Take a look at our full price list and bath cost comparison.
Can I fix it myself?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
The process
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, lay protective sheets and start once you are happy with the plan. It usually takes two to three hours for most chips, and you are welcome to carry on with your day while we work.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Ensure the area is dry
- Keep children and pets away from the room on the day
How to get a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and no obligation.
Advice
Signs you need bath repair in Arnside
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: the bath is not properly supported, so it flexes under weight.
The things clients usually mention when they call include:
- Chips on the rim or sides
- A failed DIY repair that is discoloured or lifting
- Scratches you can feel with a fingernail
- Rust spots around the plughole
What to look for in a quote
- How to look after the finish
- What the guarantee covers, and for how long
- When it can be used again
- Whether cleaning and preparation are in the price
About our accreditations · Every repair comes with a one-year guarantee.
