Lancashire · England
Bath Re-enamelling for Arnside homes
Damaged bath in Arnside? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Thin, worn enamel in places
- Enamel that’s lost its shine and feels rough
Prices and what affects them
Prices start from £350. Prices are worked out job by job, from your photos. The main factors are:
- How much damage there is
- The material
- What kind of damage it is
- Access to the area
What it costs depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Getting a price from photos
Two or three clear pictures are typically enough. Try to include:
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
- Whether it’s been repaired or coated before
- A picture taken from further back
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Bath re-enamelling at your home in Arnside
We do not move the bath, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, with the bath ready to use the following day. Whether it’s lots of chips and rust spots and wear marks under the taps, we can help, on pressed steel baths, acrylic baths and cast iron baths alike.
You are covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Where
- Arnside (LA5)
- County
- Lancashire
- Guarantee
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Honest limits
Not everything can be repaired, and we will tell you before we start. We cannot fix:
- Problems we cannot see until an old finish comes off
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that is cracked right through
Send us photos and we’ll tell you honestly.
Materials we repair
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
About Arnside
Arnside is about 9 miles north of Morecambe, in Lancashire. Book a date that suits you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. We work in 482 places across Lancashire. Our jobs stretch from Arnside to Liverpool (55 miles away).
We cover every part of the LA5 postcode area. From Station Road, Kings Close and Park View or a nearby road, we can come to you. We also cover the places around Arnside: Carr Bank (1 mile north-east), Hazelslack (1 mile east), Waterslack (1 mile south-east), Storth (1 mile north-east) and Sandside (2 miles north-east). Further out, we also cover Lancaster (10 miles south), Morecambe (9 miles south), Heysham (11 miles south), Westfield War Memorial Village (10 miles south), Sandylands (10 miles south) and Carnforth (6 miles south-east).
What’s near Arnside
Around Arnside, we work in homes near Ye Olde Fighting Cocks pub and St James' Church. Arnside has its own railway station: Arnside station. Other landmarks nearby include Meathop and Ulpha (2 miles north-west). The countryside around Arnside includes Leighton Moss RSPB reserve and Warton Crag.
Arnside: your questions answered
Is it OK to have pets in the house?
Just keep them out of the work area. We will tell you when the room can be used again.
Which areas do you work in?
Everywhere in the UK, Arnside included. There’s no extra charge for travel.
Will the bath be moved?
No. We resurface it in place, so nothing else is disturbed.
Is my repair covered?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Do you charge for travel?
We don’t add a call-out fee. The fixed price covers the visit and the work.
Will the new finish last?
Care for it and it lasts. Gentle cleaning, no suction mats.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before.
When to call us in Arnside
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Keep an eye out for these signs:
- A dull, rough surface that will not come clean
- A coating lifting around the plughole
- Worn patches where water runs and sits
- An original cast iron bath that needs restoring
Before you book anyone
- If travel is included in the price
- What protection goes down before work starts
- What happens if they find more damage
- What the guarantee covers, and for how long
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
What we do, step by step
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes a full day, and we finish with a tidy-up and a look at the finished work together.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Let us know if it has been repaired before
- Move bottles, mats and clutter away from the area
- Have somewhere for us to park nearby if possible
Ask for a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Advice
For landlords and businesses
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Should you replace it?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Our bath re-enamelling starts from £350. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
Why us?
- CHAS, Constructionline and SafeContractor accredited
- We’ll tell you if it’s not worth repairing
- Colour mixed on the day to match
- We leave the room as we found it
Take a look at our prices page and resurfacing vs replacement cost guide.
How to care for the repair
Most damage we see is avoidable. A few tips:
- Use washing-up liquid and a soft cloth
- A quick wipe after use keeps limescale away
- A dripping tap should be fixed promptly
- Wash away dyes and oils after use
Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Also near Arnside
Also in Arnside
About our accreditations · Every repair comes with a one-year guarantee.
