East Renfrewshire · Scotland
Bath Repair for Arthurlie homes
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Arthurlie, with a one-year guarantee on every repair.
- Repairs from £95
- Hairline or through cracks in acrylic
- Rusty patches near the plughole
How the visit works
Once we are through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes two to three hours for most chips, and we finish with a tidy-up and a look at the finished work together.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the next day.
Before we arrive
- Ensure the room can be ventilated
- Point us to the nearest place to park
- Avoid using the area for a few hours before we arrive
Ask for a price
For a price in Arthurlie, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Read more
About our bath repair in Arthurlie
Most of our bath repairs take a few hours, and you can generally bathe again the next day. There is no need to book a plumber or tiler, because the bath doesn’t move. Typical jobs include cracks in an acrylic bath and impact holes in acrylic, across whirlpool & spa baths, pressed steel enamel and roll-top & freestanding.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Location
- Arthurlie (G78)
- County
- East Renfrewshire
- Warranty
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Aftercare tips
A little care keeps the finish looking good. Our advice:
- Store metal items away from the bath
- Get a dripping tap fixed promptly
- Do not leave a fresh chip for long
- Rinse the bath after use, especially in hard water areas
Give the repair the full curing time we recommend before running a bath. After that, gentle cleaning keeps it looking good.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
Places near Arthurlie
More services for Arthurlie
Landlord and trade work in Arthurlie
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
Housing associations and facilities teams use us for planned and reactive repairs in East Renfrewshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
What bath repair costs
Prices start from £95. There is no charge for travel to Arthurlie. The price depends on:
- Whether old repairs or coatings need taking off
- Unusual colours or finishes
- What kind of damage it is
- Access to the area
A repair generally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Send photos for a quote
When you take your photos, these tips help us give you a firm price:
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
- Where you are, by postcode
- Whether it’s been repaired or coated before
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
FAQs for Arthurlie
What about rust by the waste?
Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.
Can you quote from photos?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Is there any odour?
There can be some smell while we work. It fades as everything cures.
When can I have a bath again?
Normally by the following day, depending on the repair.
Can you redo an old repair?
Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.
How much does bath repair cost in Arthurlie?
Prices start from £95. We give a fixed quote from your photos. Send a close-up of the damage and a wider photo and your postcode.
Do you work in Arthurlie?
We do. Repair technicians travel to Arthurlie from across the region, and the price is the same as everywhere else.
When a repair isn’t the answer
To be straight with you, some problems need a different fix:
- Flexing caused by a failed cradle or loose feet
- Water coming from the waste or taps rather than the bath
- Acrylic cracks with no access behind them
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Arthurlie
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Cast iron enamel
Repair or replace in Arthurlie?
Swapping a damaged bath for a new one usually means a plumber, lifting out the old bath, making good the tiles and panel and disposing of the old one. Repairing it deals only with the damage in one visit. Prices start from £95. Compared with replacing, repairing generally costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
What you get with us
- CHAS, Constructionline and SafeContractor accredited
- Rooms protected and left tidy
- Work done at your home or business
- Colour mixed on the day to match
Read our prices page and resurfacing vs replacement cost guide.
When to call us in Arthurlie
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Keep an eye out for these signs:
- Scratches you can feel with a fingernail
- Rust spots around the plughole
- Snagging damage from a refit
- A chipped rim or side
Before booking anyone
- Is the price fixed, and does it include VAT?
- How the colour is matched
- How long the guarantee is and what it covers
- When it can be used again
About Arthurlie
Arthurlie is about 3 miles north-west of Newton Mearns, in East Renfrewshire. Wherever you are in the G78 postcode area, we come to you. We cover 17 places across East Renfrewshire, from the larger towns to small villages. We work right across the region, from Arthurlie to Glasgow (6 miles away).
Jobs in G78 work the same way as everywhere else we cover. Streets in the area include Water Road, Park Avenue and Main Street, all of which we cover. Being close to the A736, Arthurlie is simple for us to get to. Nearby, we also work in Barrhead (1 mile north-east), Auchenback (1 mile east), Patterton (3 miles east), Deaconsbank (3 miles east) and Newton Mearns (3 miles south-east). Further out, we also cover Giffnock (4 miles east), Clarkston (4 miles east), Eaglesham (6 miles south-east), Busby (5 miles east), Carmunnock (6 miles east) and Jackton (7 miles south-east).
What’s near Arthurlie
In Arthurlie, that means homes near Bourock Parish Church and Barrhead High School, among other places. The nearest railway station is Barrhead station, about 0.5 miles north of the centre. Other landmarks nearby include Barrhead Museum (0.5 miles north-east) and Dykebar Hospital (1.9 miles north). For a walk, there’s Neilston Pad and Brother Loch.
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
