East Renfrewshire · Scotland
Bath Repair in Eaglesham
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Eaglesham and across East Renfrewshire. Send photos for a free, fixed quote.
- Repairs from £95
- Deep scratches in acrylic
- Chips along the edge of the bath
About our bath repair in Eaglesham
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath. Most baths can be used again the next day. Typical jobs include holes from dropped items and a chip where the taps sit, on pressed steel enamel, cast iron enamel and roll-top & freestanding.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Area
- Eaglesham (G76)
- County
- East Renfrewshire
- Guarantee
- One year on every repair
- Price
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
Places near Eaglesham
What else we do in Eaglesham
How the visit works
Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take a morning or an afternoon, and we leave the room as we found it.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the following day.
Preparing for the visit
- Clear the area around the damage
- Point us to the nearest place to park
- Avoid using the area for a few hours before we arrive
Ask for a price
To get a price, send a couple of pictures using our quote form or ring us. We’ll say immediately whether it can be repaired.
Read more
What your bath is made of matters
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
Honest limits
To be straight with you, there are a few things a repair won’t fix:
- Metal that has corroded all the way through
- Cracks in acrylic we can’t reach from underneath
- A whole bath that is dull or worn, where a full re-enamel is the better fix
Send us pictures and we will tell you honestly.
What we work on
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
Looking after it afterwards
Once the work has cured, treat it gently:
- Do not leave a fresh chip for long
- Give the bath a quick rinse after use
- Store metal items away from the bath
- Put a towel in the bath if you are working above it
Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Repair or replace in Eaglesham?
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and the bathroom stays exactly as it is. Prices start from £95. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Why Eaglesham customers choose us
- Fixed prices from your pictures
- Usually one visit, start to finish
- We come to you, anywhere in the UK
- Everything repaired in place
Take a look at our prices page or bath cost comparison.
What affects the price in Eaglesham
Prices start from £95. Each job gets its own fixed quote. This is what makes a difference:
- How easy the damage is to reach
- Any earlier repairs that need removing first
- What the surface is made of
- How hard the colour is to match
Compared with replacing, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
How to get a fixed price
Phone pictures are fine. Just make sure we can see:
- A close-up of the damage, in focus
- Any earlier repairs or coatings
- Where you are, by postcode
- A wider photo showing the entire bath
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and you’re under no obligation.
Where we work around Eaglesham
Eaglesham is about 3 miles south-east of Newton Mearns, in East Renfrewshire. We travel to customers in Eaglesham and nearby villages, so there is no workshop to go to. Eaglesham is one of 17 places in East Renfrewshire we cover. Our nearest city page is Glasgow, about 8 miles away.
Our visits in G76 are booked in the same way as anywhere else. You will find streets such as Montgomery Square, Gilmour Street and Polnoon Mews, all of which we cover. If you are just outside Eaglesham, we cover Jackton (1 mile north-east), Waterfoot (2 miles north), Gardenhall (2 miles north-east), Mossneuk (2 miles east) and Hairmyres (2 miles north-east). Further out, we also cover Newton Mearns (3 miles north-west), Barrhead (6 miles north-west), Giffnock (4 miles north), Clarkston (3 miles north), Arthurlie (6 miles north-west) and Neilston (7 miles north-west).
Local landmarks in Eaglesham
We visit homes around Cross Keys Inn and Carswell Church and Churchyard, among other places. The closest station to Eaglesham is Thorntonhall station, about 2.1 miles north-east of the centre. Other landmarks nearby include Hairmyres Hospital (2.5 miles north-east) and Polnoon Castle (0.9 miles south-east). For a walk, there’s Brother Loch and Corse Hill.
Eaglesham: your questions answered
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
I tried a repair kit. Can you fix it?
Yes. We take out the old repair and do it properly. Mention it when you send pictures.
Do you repair coloured baths?
Yes. We mix the colour on the day to match, including pastel and older colours.
What happens once I’ve sent photos?
We look at the photos and reply with a fixed price and some dates. If we need another angle, we will ask.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and you’ll get one combined price.
Landlords, agents and businesses in Eaglesham
Landlords, letting agents and housing providers in Eaglesham use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
About our accreditations · Every repair comes with a one-year guarantee.
