Northamptonshire · England
Bath chip & crack repair in Ashton, Northamptonshire
Damaged bath in Ashton? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Chips along the edge of the bath
- Holes from dropped items

Bath repair at your home in Ashton
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. Common call-outs are for damage beneath the taps and chips on the rim or sides, on pressed steel enamel, roll-top & freestanding and cast iron enamel.
The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll come back.

- Where
- Ashton (NN7)
- Region
- Northamptonshire
- Warranty
- A year, on every repair
- Price
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Honest limits
Some jobs aren’t right for a repair, including:
- Flexing caused by a failed cradle or loose feet
- Cracks in parts of an acrylic bath we can’t get to from below
- A steel bath rusted through
If in doubt, send photos and we will say what we think.
What we work on
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
Repair or replace: which is better?
Swapping a damaged bath for a new one normally involves a plumber, lifting out the old bath, making good the tiles and panel and disposing of the old one. A repair deals only with the damage in a single visit. Prices start from £95. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why us?
- No need to remove anything
- Rooms protected and left tidy
- We will tell you if it’s not worth repairing
- Most jobs done in one visit
See our pricing and resurfacing vs replacement cost guide.
Where we work around Ashton
Ashton is about 5 miles east of Towcester, in Northamptonshire. Book a date that suits you, and we’ll give you an arrival time in advance, so there’s no waiting around. We cover 364 places in Northamptonshire, from the larger towns to small villages. You can also see our page for Birmingham, about 48 miles away.
All of NN7 is within our area, from the main roads to the quietest streets. Local streets include Roade Hill and Stoke Road. If you’re just outside Ashton, we cover Roade (1 mile north-west), Hartwell (1 mile east), Courteenhall (2 miles north), Grafton Regis (2 miles south) and Long Street (2 miles south-east). Further out, we also cover Northampton (7 miles north), Wellingborough (14 miles north-east), Daventry (15 miles north-west), Brackley (14 miles south-west), Towcester (5 miles west) and Wolverton (6 miles south-east).
Landmarks near Ashton
Our customers here include homes close to Church of St Michael and All Angels and Ashton CofE Primary School. Other landmarks nearby include Piddington Roman Villa Museum (3.7 miles north-east). The countryside around Ashton includes Stoke Bruerne Brick Pits.
The process
Arrival times are agreed in advance. On site, it takes two to three hours for most chips for most jobs. The room is left tidy and you will know when it can be used.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, generally by the following day, the bath is ready to use.
Preparing for the visit
- Keep pets and children out of the room while we work
- Make sure the room can be ventilated
- Tell us if there are stairs or a lift
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Read more
Looking after it afterwards
To keep it looking its best:
- Store metal items away from the bath
- Get a dripping tap fixed promptly
- Ensure an acrylic bath is firm underfoot
- Give the bath a quick rinse after use
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Landlord and trade work in Ashton
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll arrange it.
For anyone letting property in or around Ashton, we’ll quote for several properties at once. Just send photos for each address and we will come back with a combined price.
How we price bath repair
Repairs from £95. Every quote is fixed and free. What we look at:
- Any earlier repairs that need removing first
- Whether we combine several jobs
- How easy the damage is to reach
- The type of damage
We charge the same wherever you are, so there is no premium for Ashton. The job itself decides the price: how much damage, what it’s made of and how many items.
Quotes from your photos
The better the photos, the more accurate the price. Here’s what helps:
- A wider photo showing the whole bath
- What it’s made of, if you know
- A coin beside the damage so we can judge size
- Natural light rather than flash
You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Nearby places to Ashton
More services for Ashton
Your questions about bath repair in Ashton
Do you repair coloured baths?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
How long does the repair take to cure?
Most baths can be used the day after. We confirm the time before we leave.
What happens if you find more damage?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
Will the repair last?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
How quickly can you book me in?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Is a holed acrylic bath repairable?
Frequently, if there’s access underneath. The hole is backed, filled and refinished to match.
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Do you do work for letting agents?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Do you need bath repair in Ashton?
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
The most common problems we’re called about are:
- A chipped rim or side
- Deep scratches in acrylic
- A cracked acrylic bath
- Holes from dropped items
Comparing quotes
- How long it needs to cure
- How your room will be protected
- Who turns up on the day
- Whether the price covers travel
About our accreditations · Every repair comes with a one-year guarantee.

