Northamptonshire · England
Bath chip & crack repair in Wolverton, Northamptonshire
Problem with your bath in Wolverton? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- A kit repair that didn’t last
- Scuffs and scratches in the surface
How we handle bath repair in Wolverton
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Our repair technicians work on pressed steel enamel, roll-top & freestanding and cast iron enamel, and the jobs we see most are impact holes in acrylic and cracks in an acrylic bath.
Whatever the size of the job, it’s backed by a one-year guarantee in Wolverton and across Northamptonshire.
- Location
- Wolverton (MK12, MK11, MK19)
- Region
- Northamptonshire
- Guarantee
- One year on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Work for landlords and builders
If you manage property in Wolverton, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
What we can’t put right
We’d rather lose a job than do one that won’t last, so these are the limits:
- Water coming from the waste or taps rather than the bath
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Rust that has eaten right through a steel bath
Send us photos and we will tell you honestly.
What we work on
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Avoid scourers, wire wool and gritty cream cleaners
- Check that an acrylic bath does not move when you stand in it
- Clean with warm water and a mild detergent
- Do not leave razors or cans standing in the bath
Leave the repair to cure for as long as we say before using the bath. From then on, mild cleaning is all it needs.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Take it off before we arrive.
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
How the visit works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes two to three hours for most chips, and we finish by cleaning up and talking you through the result.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, generally by the next day, the bath is ready to use.
How to prepare
- Let us know about parking or access
- Tell us about any previous repairs or coatings
- Point us to the nearest place to park
Ask for a price
Most customers in Wolverton get their price from photos. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
What bath repair costs
Repairs from £95. You won’t pay by the hour. The price depends on:
- Whether it’s a chip, crack, burn or wear
- The material
- The colour and finish to match
- How many items we do on one visit
We don’t add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your pictures
Photographing the damage takes a minute, and it saves a visit. Please include:
- A wider photo showing the entire bath
- Any details about the material
- Natural light rather than flash
- A coin beside the damage so we can judge size
Upload photos of the damage and one of the whole item, and tell us you are in Wolverton, and we’ll reply with a fixed quote.
Your questions about bath repair in Wolverton
Is a repair better than a new one?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Do you cover Wolverton?
Yes. We cover the entire UK and come to Wolverton and the rest of Northamptonshire. Send us pictures for a fixed quote, or call 0345 017 0787.
Is a bath repair permanent?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps it last.
What do you need from me?
A close-up, a wider photo and your postcode. Then we will agree a date.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
When can you do it?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Will there be a smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
What else we do in Wolverton
About Wolverton
Wolverton is about 3 miles north-west of Milton Keynes, in Northamptonshire. We agree a date that works for you, and we will give you an arrival time in advance, so there is no waiting around. We cover 364 places in Northamptonshire, from the larger towns to small villages. Our jobs stretch from Wolverton to London (50 miles away).
Every address in MK12, MK11 and MK19 is covered, from the main roads to the quietest streets. Whether you live on Field Lane, Oxman Lane and Manor Road or a nearby road, we can come to you. We also travel to Old Wolverton (1 mile north-west), Haversham (1 mile north-east), Stony Stratford (2 miles west), Cosgrove (2 miles north-west) and Two Mile Ash (2 miles south-east). Within a short drive, we also cover Northampton (13 miles north), Brackley (14 miles west), Towcester (8 miles north-west), East Hunsbury (11 miles north), Wootton (10 miles north) and White Hills (15 miles north).
Landmarks near Wolverton
In Wolverton, that means homes near Church of St George the Martyr, The New Queen Victoria pub and The Radcliffe School, among other places. Also close by are The Radcliffe School (less than half a mile south-west) and Wyvern School (within half a mile south-east). For rail, the closest station is Wolverton station, about 0.6 miles north-east. Well-known places in the area include Bradwell Motte (1.6 miles south-east) and Badminton Museum (2.1 miles south-east). Not far away are Lodge Lake and Little Linford Wood.
Do you need bath repair in Wolverton?
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal will start to rust.
If you can see any of these, send us a photo:
- Chips on the rim or sides
- A chip where the taps sit
- Impact holes in acrylic
- Rust spots around the plughole
What to look for in a quote
- How your room will be protected
- How changes to the job are handled
- Who turns up on the day
- Aftercare advice
About our accreditations · Every repair comes with a one-year guarantee.
