Northamptonshire · England
Bath Repair in Roade
Bath repair for Roade, without a refit. Get a fixed price from your photos, then we come to you.
- Repairs from £95
- Scratches you can feel with a fingernail
- Impact holes in acrylic
Bath repair at your home in Roade
Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. Nothing is unplumbed, your tiles stay as they are, and the repaired area is colour matched so it blends in. Whether it’s a chipped rim or side and snagging damage from a refit, we can normally put it right, on whirlpool & spa baths, acrylic and pressed steel enamel alike.
Big or small, you get the same one-year guarantee.
- Area
- Roade (NN7)
- County
- Northamptonshire
- Cover
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Roade questions
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Is there any odour?
Some materials have a smell while they’re applied. It fades as everything cures.
Do you cover Roade?
Yes. We work across the UK and travel to Roade. Send us pictures for a fixed quote, or call 0345 017 0787.
How long does the repair take to cure?
Usually the following day. We’ll tell you the exact curing time when we finish.
I tried a repair kit. Can you fix it?
Yes. We take out the old repair and do it properly. Tell us about it when you send pictures.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
Is my repair covered?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
Keeping it looking good
Much of the damage we repair could have been avoided. A few tips:
- Keep metal cans and razors off the surface
- Ensure an acrylic bath is firm underfoot
- Clean with warm water and a mild detergent
- Avoid scourers, wire wool and gritty cream cleaners
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust sets in.
Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Remove it before the repair.
Should you replace it?
Replacing a fitted bath normally involves a plumber, removing the old bath, re-tiling and a new panel and disposing of the old one. A repair fixes just the damaged area in one visit. Repairs from £95, with every job priced individually. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
What you get with us
- One visit for most repairs
- Straight answers about what a repair can do
- Everything repaired in place
- We leave the room as we found it
See our full price list or bath cost comparison.
Can I fix it myself?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
Where we work around Roade
Roade is about 4 miles north-east of Towcester, in Northamptonshire. We agree a date that works for you, and you will know when to expect us, so there is no waiting around. Roade is one of 364 towns and villages in Northamptonshire we cover. We work right across the region, from Roade to Birmingham (47 miles away).
Every address in NN7 is covered, from the main roads to the quietest streets. That includes homes on High Street, London Road and Walkers Way and the roads around them. We also travel to Courteenhall (1 mile north), Ashton (1 mile south-east), Quinton Green (2 miles north-east), Hartwell (2 miles east) and Quinton (2 miles north-east). Further out, we also cover Northampton (6 miles north), Wellingborough (13 miles north-east), Daventry (14 miles north-west), Brackley (14 miles south-west), Towcester (4 miles south-west) and Wolverton (7 miles south-east).
What’s near Roade
Locally, our jobs take us to homes close to Roade Primary School and Roade Baptist Church And Attached Schoolroom, among other places. Well-known places in the area include Piddington Roman Villa Museum (3.6 miles north-east) and Northampton General Hospital (5.5 miles north). Not far away are Stoke Bruerne Brick Pits.
Do you need bath repair in Roade?
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
You may need us if you’ve spotted:
- An old repair that has yellowed or come loose
- Chips on the rim or sides
- Scratches you can feel with a fingernail
- A chip where the taps sit
What to look for in a quote
- Whether they match the colour on site
- How your room will be protected
- Whether cleaning and preparation are in the price
- A fixed quote, and whether VAT is included
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, in much the same way.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Also in Roade
The process
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes two to three hours for most chips, and we finish by cleaning up and talking you through the result.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, generally by the day after, the bath is ready to use.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Make sure the room can be ventilated
- Clear toiletries, mats and anything else from around the area
Getting a price
Email us a photo of the damage and one of the whole item, and tell us you are in Roade, and we will come back with a fixed quote.
Read more
Prices and what affects them
Repairs from £95. We price every job individually. What matters most is:
- How many areas need work
- How easy the damage is to reach
- How hard the colour is to match
- Doing more than one item at once
We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Send photos for a quote
A couple of clear pictures is all it takes. It helps if you send:
- A coin or ruler next to the damage for scale
- The material, if you know it
- A wider photo showing the whole bath
- Any earlier repairs or coatings
If you are in Roade and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
When we would advise against a repair
Honesty matters more than a booking, so here’s what a repair will not do:
- Leaking fittings, which need a plumber
- A bath worn all over, where resurfacing makes more sense
- Cracks in parts of an acrylic bath we can’t get to from below
Send us pictures and we’ll tell you honestly before booking.
What we work on
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
About our accreditations · Every repair comes with a one-year guarantee.
