Dorset · England

Bath Repair for Askerswell homes

Bath repair for Askerswell, without a refit. Get a fixed price from your photos, then book a visit.

  • Repairs from £95
  • Chips caused by builders
  • An old repair that has yellowed or come loose
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Askerswell?

What we do, step by step

Your technician turns up when we said we would and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes two to three hours for most chips, and we leave the room as we found it.

  1. First, we check the damage against your photos and agree the plan.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. We tint the finish by hand to match the bath.
  5. The repair is polished to the same gloss as the bath and left to cure.

Before we arrive

  • Mention if the room is upstairs or in a flat
  • Mention any earlier repairs or resurfacing
  • Mention any parking restrictions or tricky access

Getting a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.

Get a fixed quote

Related advice

Bath repair in Askerswell without replacing anything

Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We regularly repair whirlpool & spa baths, acrylic and cast iron enamel, and the jobs we see most are a chip where the taps sit and chips on the rim or sides.

Your repair is guaranteed for a year, as with every job we do.

Where
Askerswell (DT2)
Region
Dorset
Warranty
A year, on every repair
Quote
From £95. Free, fixed quote from pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Bath enamel chip by the waste, filled and colour matched (before and after)

Keeping it looking good

Simple care helps the repair last. Our advice:

  • Don’t leave razors or cans standing in the bath
  • If an acrylic bath flexes, have its feet adjusted
  • Rinse it down after each bath
  • A dripping tap stains enamel, so fix it early

Keep metal objects like razors and cans off the surface, because they can mark the enamel. A dripping tap should be fixed early, too.

Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and water can get through to the floor below.

Askerswell and the surrounding area

Askerswell is about 4 miles east of Bridport, in Dorset. Book a date that suits you, and you will know when to expect us, so you are not left waiting in all day. We cover all 462 towns and villages in Dorset, from the larger towns to small villages.

All of DT2 is covered, from the main roads to the quietest streets. Whether you live on Parsons Lane, Nallers Lane and Hembury Road or a nearby road, we can come to you. If you’re just outside Askerswell, we cover Chilcombe (1 mile south), Litton Cheney (2 miles south-east), Powerstock (2 miles north-west), Long Bredy (3 miles south-east) and South Poorton (3 miles north). We also work in nearby towns such as Weymouth (12 miles south-east), Dorchester (10 miles east), Bridport (4 miles west), Rodwell (12 miles south-east), Fordington (10 miles east) and Lyme Regis (12 miles west).

Landmarks near Askerswell

We visit homes around The Spyway Inn and Parish Church of St Michael, among other places. Well-known places in the area include Burcomb Wood (4 miles north) and Bridport Community Hospital (4.6 miles west). Green spaces nearby include Eggardon Hill.

Map of Askerswell © OpenStreetMap contributors

What a repair cannot fix

Some jobs are not right for a repair, including:

  • Leaking fittings, which need a plumber
  • Acrylic cracks with no access behind them
  • A steel bath rusted through

If in doubt, send pictures and we’ll say what we think before booking.

What we work on

  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Cast iron enamel
  • Acrylic
  • Pressed steel enamel

Should I try a DIY kit first?

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

What affects the price in Askerswell

Repairs from £95. A fixed quote means you know the cost before you book. We look at:

  • The colour and finish to match
  • What the surface is made of
  • Previous DIY repairs that have to come out
  • How much damage there is

The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your pictures, so you know the cost before you book.

Getting a price from pictures

The better the pictures, the more accurate the price. Here’s what helps:

  • A coin beside the damage so we can judge size
  • A clear, close picture of the problem area
  • Whether it’s been repaired or coated before
  • Natural light rather than flash

We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.

Materials and what they mean for the repair

Composite and resin

Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, just like other baths.

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so repair chips early.

What we are called out for in Askerswell

Acrylic baths that crack nearly always have a support problem. Legs that aren’t adjusted, a missing cradle or a soft floor let the base flex.

You may need us if you’ve spotted any of these:

  • Rusty patches near the plughole
  • An old repair that has yellowed or come loose
  • A chip where the taps sit
  • Hairline or through cracks in acrylic

What your quote should include

  • What protection goes down before work starts
  • Whether cleaning and preparation are in the price
  • A fixed price, and whether VAT is included
  • What aftercare is recommended

How to compare quotes

For landlords and businesses

Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.

We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will arrange it.

Askerswell: your questions answered

How much does bath repair cost in Askerswell?

Prices start from £95. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.

Do you do work for letting agents?

We do, regularly. We can quote for several properties together and work between tenancies.

Will there be a smell?

Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.

Can you quote from photos?

Normally, yes. Clear photos let us give you a fixed price without visiting.

Can you repair a chip on a coloured bath?

Yes, coloured baths are no problem. We tint the finish to your bath on site.

It’s been repaired before. Can you still fix it?

In most cases. The old repair comes out first, so mention it when you send photos.

Is it safe with children and pets around?

Yes, as long as they stay out of the room we’re working in. We will let you know when it’s safe to use again.

Is a repair better than a new one?

Normally, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.