Dorset · England
Bath Re-enamelling for Askerswell homes
Our technicians come to Askerswell for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A period or roll-top bath worth keeping
Bath re-enamelling in Askerswell without replacing anything
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. If you are dealing with a roll-top that’s seen better days and a coloured bath you want in white, we can typically put it right, on acrylic baths, Victorian roll-tops and basins & shower trays alike.
All our work comes with our one-year guarantee, wherever you are in Dorset.
- Area
- Askerswell (DT2)
- Area hub
- Dorset
- Guarantee
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Common problems we fix in Askerswell
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
The most common problems we are called about are:
- Stains that will not shift
- An outdated colour you’d like to change
- Worn patches where water runs and sits
- A roll-top that’s seen better days
What to look for in a quote
- How your room will be protected
- What the guarantee covers, and for how long
- What aftercare is recommended
- Who will actually do the work
What we can’t put right
In fairness, some problems need a different fix:
- A cast iron or steel bath that is cracked right through
- Problems we cannot see until an old finish comes off
- A bath that’s rusted through
Send us pictures and we will tell you honestly.
Materials we work on in Askerswell
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Our work in Askerswell
Askerswell is about 4 miles east of Bridport, in Dorset. We agree a date that works for you, and you will know when to expect us, so you are not left waiting in all day. Askerswell is one of 462 towns and villages in Dorset where we work.
Our visits in DT2 are booked in the same way as anywhere else. Local streets include Parsons Lane, Nallers Lane and Hembury Road. We also cover the places around Askerswell: Chilcombe (1 mile south), Litton Cheney (2 miles south-east), Powerstock (2 miles north-west), Long Bredy (3 miles south-east) and South Poorton (3 miles north). Larger places within reach include Weymouth (12 miles south-east), Dorchester (10 miles east), Bridport (4 miles west), Rodwell (12 miles south-east), Fordington (10 miles east) and Lyme Regis (12 miles west).
Landmarks near Askerswell
We visit homes around The Spyway Inn and Parish Church of St Michael, among other places. Nearby you’ll also find Burcomb Wood (4 miles north) and Bridport Community Hospital (4.6 miles west). Open spaces near Askerswell include Eggardon Hill.
Landlords, agents and businesses in Askerswell
For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.
We regularly work with letting and managing agents. Send the address, pictures and access details and we will arrange it.
Should you replace it?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. Compared with replacing, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why book with us
- Normally one visit, start to finish
- Fixed prices from your photos
- CHAS and Constructionline accredited
- One price list for the entire UK
Read our full price list and bath cost comparison.
Prices and what affects them
Resurfacing from £350. We give every job a fixed quote from pictures. These are the things that affect it:
- Doing more than one item at once
- How much damage there is
- Previous DIY repairs that have to come out
- The colour and finish to match
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed quote
Photographing the damage takes a minute, and it saves a visit. Please include:
- Whether it’s been repaired or coated before
- A close-up of the damage, in focus
- A wider photo showing the entire bath
- The postcode, so we can plan the visit
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed quote. There is no charge for the quote and no obligation.
Common questions in Askerswell
Can you repair something that’s been repaired before?
Yes, we often do. It can add a little time, which we include in the quote.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
How long does re-enamelling take?
Normally one day, with the bath ready the following day. Deeply pitted baths may need a second day.
I rent my home. Can I book you?
Yes. Ask your landlord first, and we can send them the quote if that helps.
How do I book?
Photos of the damage, a photo of the entire bath and your postcode. After that, we just agree a date.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
How durable is a resurfaced bath?
Look after it and it lasts. Gentle cleaning, no suction mats.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Also near Askerswell
Also in Askerswell
How to care for the repair
Aftercare is simple:
- Keep toiletries on a shelf rather than in the bath
- Wash away dyes and oils after use
- Clean with a soft cloth and mild detergent
- Dry the bath after use to stop limescale
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
How it works
There is not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. The job generally runs to the best part of a day.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can generally be used the following day.
Before we arrive
- Move bottles, mats and clutter away from the area
- Avoid using the area for a few hours before we arrive
- Let us know if it has been repaired before
Get a quote
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
