Cumbria · England

Bath chip & crack repair in Askham, Cumbria

Chip and crack repairs to enamel, acrylic and cast iron baths in Askham, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • Scuffs and scratches in the surface
  • Chips along the edge of the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Askham

Different materials, different repairs

Acrylic

Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Bath repair in Askham, done in place

Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. Nothing is unplumbed, the tiles are not touched, and the finish is matched to the rest of the bath. If you’re dealing with rust by the waste and overflow and scuffs and scratches in the surface, we can help, whatever the material.

We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.

Location
Askham (CA10)
Region
Cumbria
Guarantee
One year on every repair
Quotes
From £95. Free, fixed price from pictures
Telephone
0345 017 0787
Updated
23 October 2026
Before and after: a chipped, rust-stained bath around the plughole

Signs you need bath repair in Askham

Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Fittings cause damage too: water sits around them, and any chip there soon rusts.

Most people contact us after spotting one of these:

  • Scuffs and scratches in the surface
  • A chip where the taps sit
  • Damage done while the bathroom was being fitted
  • Impact holes in acrylic

What to look for in a quote

  • How changes to the job are handled
  • If travel is included in the price
  • The length of the guarantee and what it covers
  • Whether a trained technician does the job

10 questions to ask before booking

Repair or replace: which is better?

People often assume a cracked or chipped bath has to come out. In most cases it does not: a proper repair gives it years more use, without the cost and upheaval of replacing it. Prices start from £95. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your photos, so there are no surprises on the day.

Why us?

  • We leave the room as we found it
  • No need to remove anything
  • No extra charge for your area
  • Straight answers about what a repair can do

Take a look at our prices page and resurfacing vs replacement cost guide.

Your questions about bath repair in Askham

Is it worth repairing rather than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.

What happens after I send pictures?

We check the damage, the material and your postcode, then reply with a quote and the next dates we have.

Is a bath repair permanent?

It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.

When can I have a bath again?

Normally by the following day, depending on the repair.

Is a cracked acrylic bath repairable?

In most cases. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.

Can landlords book you?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

What if the damage is worse than the pictures show?

We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.

Is there any odour?

A little, depending on the job. Open windows and an extractor fan help, and it soon fades.

DIY kit or professional repair?

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

How we price bath repair

Repairs from £95. We price every job individually, from your photos. The main factors are:

  • The material
  • How easy the damage is to reach
  • Whether old repairs or coatings need taking off
  • How much damage there is

A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

Quotes from your pictures

Almost every job we do is priced from pictures. This is what to send:

  • A clear, close picture of the problem area
  • Natural light rather than flash
  • A coin or ruler next to the damage for scale
  • Where you are, by postcode

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price.

Work for landlords and builders

Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

Covering Askham

Askham is about 4 miles south of Penrith, in Cumbria. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Askham is one of 438 towns and villages in Cumbria where we work. Our nearest city page is Newcastle upon Tyne, about 52 miles away.

Postcode districts we cover here: CA10. Neighbouring places we cover include Newtown (1 mile north-east), Lowther (2 miles east), Hackthorpe (2 miles east), Sockbridge (2 miles north-west) and Clifton (2 miles north-east). Within a short drive, we also cover Penrith (4 miles north), Keswick (15 miles west), Appleby-in-Westmorland (11 miles east), Fair Hill (5 miles north), Ambleside (15 miles south-west) and Carleton (4 miles north).

Around Askham

Typical jobs here are in homes near Punch Bowl Hotel Public House and Church of St Peter, among other places. For rail, the closest station is Penrith station, about 3.9 miles north of the centre. Well-known places in the area include Lowther Castle (0.6 miles east) and Wetheriggs Pottery & Museum (2.9 miles north-east). Open spaces near Askham include Heughscar Hill and Rough Hill Tarn.

Map of Askham © OpenStreetMap contributors

How the visit works

From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a morning or an afternoon, and we finish with a tidy-up and a look at the finished work together.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage.
  3. We fill it, let it set, then sand it flush.
  4. We match both the colour and the shine.
  5. We tidy up and tell you when the bath can be used, generally the following day.

Preparing for the visit

  • Make sure the room can be ventilated
  • Keep a parking space free if you can
  • Mention if the room is upstairs or in a flat

Ask for a price

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.

Get a free quote

Read more

Keeping it looking good

After the repair has cured, a few habits help it last:

  • Get any new chip repaired before it rusts
  • Keep abrasive pads and gritty cleaners away from the bath
  • Rinse it down after each bath
  • A dripping tap stains enamel, so fix it early

In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath, avoiding abrasives.

Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.