Halton · England
Bath Repair for Astmoor homes
Fixed-price bath repair in Astmoor and the surrounding area, usually in one visit.
- Repairs from £95
- Impact holes in acrylic
- Hairline or through cracks in acrylic
How we handle bath repair in Astmoor
Chips, cracks, rust spots and small holes is repaired in place. There is no plumbing to disconnect, the tiles aren’t touched, and the finish is matched to the rest of the bath. If you’re dealing with a failed DIY repair that’s discoloured or lifting and chips under the taps, we can normally put it right, on acrylic, pressed steel enamel and cast iron enamel alike.
You are covered for a year from the day of the repair. Just call us if there is a problem and we will sort it.
- Where
- Astmoor (WA7)
- County
- Halton
- Cover
- 12 months on all our work
- Price
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
When to call us in Astmoor
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: the bath is not properly supported, so it flexes under weight.
Send us a photo if you notice any of these:
- Scuffs and scratches in the surface
- An old repair that has yellowed or come loose
- Rust spots around the plughole
- A chipped rim or side
What your quote should include
- How long the guarantee is and what it covers
- What aftercare is recommended
- How long it needs to cure
- What protection goes down before work starts
Repair or replace in Astmoor?
A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Our bath repair starts from £95. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why Astmoor customers choose us
- One price list for the whole UK
- Fixed prices from your photos
- One-year guarantee on every repair
- CHAS, Constructionline and SafeContractor accredited
See our full price list and resurfacing vs replacement cost guide.
How the visit works
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes a few hours, depending on the damage. If we find something your photos didn’t show, we will explain it before carrying on.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, usually the next day.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Let the surface dry out before the visit
- Clear the area around the damage
Get a quote
The quickest way to a price is to send two or three photos through our quote form or call us. We will say straight away whether it can be repaired.
Related advice
Also in Astmoor
What bath repair costs
Repairs from £95. There are no hourly rates or hidden extras. The price is based on:
- The colour and finish to match
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
- Previous DIY repairs that have to come out
A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with nothing added on the day.
Send photos for a quote
Phone photos are fine, there’s no need for anything special. Make sure they show:
- A wider photo showing the whole bath
- Something in shot to show the size
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and you’re under no obligation.
FAQs for Astmoor
What happens after I send pictures?
We come back with a fixed quote, plus dates. There is no obligation to book.
Can you quote from photos?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
When can I have a bath again?
Generally within a day, though it depends on what we have done.
What do you need from me?
Use the quote form or ring 0345 017 0787.
Do you cover Astmoor?
Yes. We cover the whole UK and come to Astmoor and the rest of Halton. Send photos and we’ll quote, or call 0345 017 0787.
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Are there extra charges for Astmoor?
Travel is included in the price, and we charge the same wherever you are.
Should I try a DIY kit first?
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- Do not scrub with anything abrasive
- Don’t leave razors or cans standing in the bath
- Rinse it down after each bath
- Stick to mild cleaners and a soft cloth
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Remove it before the repair.
Our work in Astmoor
Astmoor is about 1 mile north of Runcorn, in Halton. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Astmoor is one of 30 towns and villages in Halton we cover. Our jobs stretch from Astmoor to Liverpool (about 10 miles away).
All of WA7 is covered. Streets in the area include Sea Lane, Davy Road and Spark Lane, all of which we cover. Astmoor sits on or near the A558, so getting to you is simple. Close by, we cover Grange (1 mile south-west), Halton Lodge (1 mile south), West Bank (2 miles north-west), Heath (2 miles south-west) and Beechwood (2 miles south). Larger places within reach include Widnes (3 miles north-west), Chestnut Lodge (3 miles north-west), Hough Green (4 miles north-west), Farnworth (3 miles north), Ditton (3 miles north-west) and Ball o' Ditton (3 miles north-west).
What’s near Astmoor
We visit homes around Town Hall Park, Blessed Carlo Acutis Catholic and Church of England Academy and The Norton Arms Public House and the streets around them. You’ll also find The Grange School (0.7 miles south-west), Christ Church & Pastoral Centre (within half a mile south-east) and Astmoor Primary School (less than half a mile east). The nearest railway station is Runcorn station, roughly 1.6 miles west of the centre. Well-known places in the area include Halton General Hospital (1.1 miles south) and Runcorn Shopping City (0.9 miles south). Not far away are Hale Duck Decoy.
What a repair can’t fix
Not everything can be repaired, and we will tell you before we start. We cannot fix:
- Rust that has eaten right through a steel bath
- Water coming from the waste or taps rather than the bath
- Wear across the entire surface, which needs re-enamelling
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
About our accreditations · Every repair comes with a one-year guarantee.
