Halton · England
Bath chip & crack repair in Clifton, Halton
Chip and crack repairs to enamel, acrylic and cast iron baths in Clifton, carried out at your home and guaranteed for a year.
- Repairs from £95
- Rust spots around the plughole
- A chip where the taps sit

DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Bath repair in Clifton without replacing anything
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. Our repair technicians work on roll-top & freestanding, cast iron enamel and pressed steel enamel, and the jobs we see most are rusty patches near the plughole and scuffs and scratches in the surface.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.

- Area
- Clifton (WA7, WA6)
- County
- Halton
- Cover
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
More services for Clifton
FAQs for Clifton
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
How long does the repair take to cure?
Most baths can be used the day after. We confirm the time before we leave.
Is it safe with children and pets around?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Do you charge for travel?
There is no separate call-out charge. Your fixed quote includes everything.
Which areas do you work in?
All of Halton, and the rest of the UK. There’s no extra charge for travel.
Can you fix rust around the plughole?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Should you replace it?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and nothing else in the room changes. Our bath repair starts from £95. The price reflects the work involved, not your postcode. The full price is agreed before booking, with no extras added later.
Why Clifton customers choose us
- Colours mixed by hand to suit your surface
- We come to you, anywhere in the UK
- Accredited with CHAS, Constructionline and SafeContractor
- Every repair guaranteed for a year
See our full price list and bath cost comparison.
Signs you need bath repair in Clifton
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
The things clients generally mention when they call include:
- A hole punched through by something heavy
- Chips caused by builders
- Cracks in an acrylic bath
- Chips along the edge of the bath
Comparing quotes
- Whether the price is fixed and includes VAT
- Whether a trained technician does the job
- What happens if they find more damage
- If travel is included in the price
How to care for the repair
To keep it looking its best:
- Protect the bath with a towel when doing jobs nearby
- Stick to mild cleaners and a soft cloth
- A dripping tap stains enamel, so fix it early
- Keep abrasive pads and gritty cleaners away from the bath
A repaired bath needs no special treatment. Skip bleach and gritty creams.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
Covering Clifton
Clifton is about 1 mile south-west of Runcorn, in Halton. We work in every kind of home, old or new, large or small, plus businesses and rented homes. We cover 30 places in Halton, from the larger towns to small villages. We work right across the region, from Clifton to Liverpool (about 11 miles away).
All of WA7 and WA6 is within our area. Streets in the area include Ascot Avenue, Fenwick Lane and Handforth Lane. Main roads around Clifton include the A557, so getting to you is simple. We also cover the places around Clifton: Beechwood (1 mile east), Halton Lodge (1 mile north), Grange (1 mile north), Heath (1 mile north-west) and Weston (1 mile west). Larger places within reach include Widnes (4 miles north), Barrow's Green (4 miles north), Chestnut Lodge (4 miles north-west), Hough Green (5 miles north-west), Farnworth (5 miles north) and Sandymoor (3 miles north-east).
What’s near Clifton
Around Clifton, we work in homes near Beechwood Primary School, Holiday Inn and Floodbrook Clough. You will also find Blessed Carlo Acutis Catholic and Church of England Academy (0.8 miles north), St Mark (0.6 miles east) and The Heath School (0.9 miles north-west). The closest station to Clifton is Frodsham station, about 1.4 miles south of the centre. Further afield, we also cover the area around Halton General Hospital (1 mile north-east) and Runcorn Shopping City (1 mile north-east). Open spaces near Clifton include Hale Duck Decoy.
What we cannot put right
It helps to know what we cannot do:
- Cracks in acrylic we cannot reach from underneath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Rust that has eaten right through a steel bath
Send us pictures and we will tell you honestly.
Surfaces we repair
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
How we price bath repair
Repairs from £95. Quotes are free and the price is fixed. What we look at:
- How many items we do on one visit
- The material
- How much damage there is
- What kind of damage it is
A repair typically costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Getting a price from pictures
It only takes a minute to photograph the damage. Please include:
- Something in shot to show the size
- One sharp close-up of the damage
- The postcode, so we can plan the visit
- The material, if you know it
If you are in Clifton and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
The process
We work cleanly and quietly, so you can carry on at home. We protect the area first, then the work takes a few hours. At the end we talk you through how soon it can be used and how to care for it.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the next day.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Plan for the room to be out of bounds to pets and children
- Make sure the room can be ventilated
Getting a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Read more
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, in much the same way.
About our accreditations · Every repair comes with a one-year guarantee.

