Wiltshire · England
Bath chip & crack repair in Atworth, Wiltshire
We travel to Atworth for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- A chipped rim or side
- A failed DIY repair that’s discoloured or lifting
Bath repair at your home in Atworth
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. If you’re dealing with rusty patches near the plughole and chips on the rim or sides, we can typically put it right, whatever the material.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Area
- Atworth (SN12)
- Area hub
- Wiltshire
- Warranty
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What we’re called out for in Atworth
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, frequently before anyone notices. We repair snagging damage like this regularly.
The most common problems we’re called about are:
- Scratches you can feel with a fingernail
- Chips along the edge of the bath
- Snagging damage from a refit
- Rust by the waste and overflow
Questions to ask before booking
- Aftercare advice
- If travel is included in the price
- How the colour is matched
- Is the price fixed, and does it include VAT?
Can I fix it myself?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
Questions from Atworth
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Will there be a smell?
Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.
How much does bath repair cost in Atworth?
Repairs from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
Can you repair a hole in a bath?
Often, if there’s access underneath. We back the hole, fill it and refinish the surface.
What happens next?
You will get a fixed quote back. There is no obligation to book.
Can you price it without visiting?
In nearly every case. If photos don’t show enough, we will ask for another angle.
Towns and villages near Atworth
What else we do in Atworth
Our work in Atworth
Atworth is about 3 miles north-west of Melksham, in Wiltshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Atworth is one of 425 towns and villages in Wiltshire we cover. Our jobs stretch from Atworth to Birmingham (about 76 miles away).
Our repair technicians cover all of SN12 and the streets around it. We regularly work on streets such as Bath Road, Mead Park and Godwins Close and the roads around them. Close by, we cover Pie Corner (1 mile east), Norrington Common (1 mile south-east), Whitley (1 mile east), Shaw (1 mile east) and Broughton Gifford (2 miles south-east). Further out, we also cover Trowbridge (5 miles south), Chippenham (5 miles north-east), Calne (9 miles east), Devizes (9 miles east), Westbury (9 miles south) and Melksham (3 miles south-east).
What’s near Atworth
Locally, our jobs take us to homes close to The White Hart pub, Church of St Michael and All Angels and Churchfields, among other places. The nearest railway station is Melksham station, about 2.2 miles south-east. Further afield, we also cover the area around Corsham (4.1 miles north) and Avon Tyre Museum (2.2 miles south-east).
Landlord and trade work in Atworth
We regularly work with letting and managing agents. Send the address, photos and access details and we’ll arrange it.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
Looking after it afterwards
It’s all simple stuff, just a few sensible habits:
- A dripping tap stains enamel, so fix it early
- Avoid scourers, wire wool and gritty cream cleaners
- Use a soft cloth and washing-up liquid for everyday cleaning
- Rinse it down after each bath
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
Tape over a fresh chip or crack until it’s repaired, so water can’t get in. Take it off before we arrive.
Repair or replace in Atworth?
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Our bath repair starts from £95. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Why us?
- Dust sheets down, tidy finish
- One price list for the whole UK
- Normally one visit, start to finish
- CHAS, Constructionline and SafeContractor accredited
See our pricing and bath cost comparison.
When a repair isn’t the answer
Some problems need a builder, plumber or fitter rather than us:
- Water coming from the waste or taps rather than the bath
- Flexing caused by a failed cradle or loose feet
- Metal that has corroded all the way through
If in doubt, send pictures and we will say what we think before booking.
Surfaces we repair
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
How we price bath repair
Repairs from £95. Each job gets its own fixed quote. This is what makes a difference:
- How many areas need work
- How easy the damage is to reach
- Previous DIY repairs that have to come out
- What kind of damage it is
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
Send photos for a quote
Most quotes are done from pictures alone. To help us price it:
- One picture of the entire bath
- The material, if you know it
- A coin or ruler next to the damage for scale
- One sharp close-up of the damage
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed price back. There is no charge for the quote and no obligation.
The process
We work cleanly and quietly. Protection goes down first, then the job itself takes two to three hours for most chips. Before we leave, we explain how soon it can be used and how to look after it.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Tell us if there are stairs or a lift
- Keep pets and children out of the room while we work
- Have a window or extractor fan available
How to get a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
