Wiltshire · England
Bath Repair in Melksham
Problem with your bath in Melksham? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Scuffs and scratches in the surface
- A cracked acrylic bath
Repair or replace in Melksham?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. Where the entire surface is tired, we may suggest re-enamelling instead. Prices start from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Why choose Surface Doctor in Melksham
- No need to remove anything
- Work done at your home or business
- Honest advice, even when it means no job
- Colour-matched on site
Read our prices page or guide to resurfacing and replacement costs.
How we handle bath repair in Melksham
It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. We work on roll-top & freestanding, cast iron enamel and whirlpool & spa baths, and common reasons people get in touch are snagging damage from a refit and a failed DIY repair that’s discoloured or lifting.
You get a one-year guarantee, the same in Melksham as everywhere else we work.
- Area
- Melksham (SN12)
- County
- Wiltshire
- Warranty
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Melksham and nearby
Melksham is about 5 miles north-east of Trowbridge, in Wiltshire. Across the SN12 area, a technician comes to you. Melksham is one of 425 towns and villages in Wiltshire where we work. Our nearest city page is Birmingham, about 76 miles away.
Postcode districts we cover here: SN12. Jobs here include addresses on Gloucester Square, High Street and Ferris Grove. With the A350 and A365 close by, Melksham is easy for our technicians to reach. Close by, we cover Berryfield (1 mile south-west), Bowerhill (1 mile south), Sandridge (1 mile east), Redstocks (2 miles south-east) and Beanacre (2 miles north). Within a short drive, we also cover Trowbridge (5 miles south-west), Chippenham (6 miles north), Calne (7 miles north-east), Devizes (6 miles east), Westbury (8 miles south) and Warminster (12 miles south). Melksham is among the bigger towns we cover in Wiltshire.
Around Melksham
Our customers here include homes close to The George Ward Technology College, The Manor CofE VC Primary School and West End Public House And Garden Walls and the streets around them. Also close by are Melksham United Church (within half a mile west) and Melksham Oak Community School (1 mile south-east). The nearest railway station is Melksham station, roughly 0.8 miles north-west of the centre. Other landmarks nearby include Melksham Community Hospital (within half a mile south) and Avon Tyre Museum (0.8 miles north-west).
What happens on the day
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes two to three hours for most chips. We tidy up before we leave and tell you when it’s ready to use.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Tell us about parking, stairs or access
- Mention if the room is upstairs or in a flat
Getting a price
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and no obligation.
Related advice
Work for landlords and builders
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
How to look after the repair
How the surface is treated afterwards matters. Here’s what we suggest:
- Store metal items away from the bath
- Make sure an acrylic bath is firm underfoot
- Cover the bath during DIY or decorating
- Do not scrub with anything abrasive
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine, avoiding abrasives.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Take it off before we arrive.
What your bath is made of matters
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.
What we cannot put right
We will always be straight with you, so here’s what a repair will not do:
- A steel bath rusted through
- Flexing caused by a failed cradle or loose feet
- Cracks in acrylic we can’t reach from underneath
Send us pictures and we will tell you honestly before you book.
What we work on
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Pressed steel enamel
How we price bath repair
Prices start from £95. We charge the same across the UK, including Melksham. The price reflects:
- Previous DIY repairs that have to come out
- The type of damage
- Access to the area
- Doing more than one item at once
Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.
Getting a price from pictures
The better the pictures, the more accurate the price. Here’s what we find most useful:
- Your postcode, so we can check dates
- What it’s made of, if you know
- A clear, close picture of the problem area
- Whether it’s been repaired or coated before
The quickest way to a price is to send two or three photos using our quote form or call us. We will say immediately whether it can be repaired.
Your questions about bath repair in Melksham
Can you repair a hole in a bath?
Usually. Photos of the hole and the underside help us check.
Do you cover the whole of Wiltshire?
We work UK-wide, and that includes Melksham. Prices don’t change with location.
How invisible is a bath repair?
On a glossy bath, you’ll struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Is the work guaranteed?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
How soon can you come?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Nearby places to Melksham
Also in Melksham
Can I fix it myself?
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
About our accreditations · Every repair comes with a one-year guarantee.
