Hampshire · England
Bath chip & crack repair in Avon Castle, Hampshire
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Avon Castle and across Hampshire. Free, fixed quotes from your photos.
- Repairs from £95
- A hole punched through by something heavy
- Scuffs and scratches in the surface
Avon Castle questions
I’m a tenant. Can you help?
Yes. Check with your landlord; we can send the quote to them too.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Can I add another job to the visit?
Yes. Doing several items on one visit generally costs less than separate visits. Send photos of everything you’d like done.
Can you match an avocado or pink bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
When can I have a bath again?
Normally within a day, depending on the repair.
Will the repair show?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference, and we will tell you what to expect.
What does bath repair cost?
Prices start from £95. Every job gets a fixed price based on photos of the damage. Send a close-up and a photo of the whole item and your postcode.
Do you work in Avon Castle?
Yes. We work across the UK and come to Avon Castle and the rest of Hampshire. Send us photos for a fixed quote, or call 0345 017 0787.
Bath repair in Avon Castle, done in place
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. Common call-outs are for chips along the edge of the bath and rusty patches near the plughole, across pressed steel enamel, acrylic and roll-top & freestanding.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Where
- Avon Castle (BH24)
- Region
- Hampshire
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What a repair cannot fix
A repair is not right for every job, for example:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Water coming from the waste or taps rather than the bath
- A steel bath rusted through
Send us pictures and we’ll tell you honestly.
What we work on
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
How to care for the repair
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Keep metal cans and razors off the surface
- Rinse it down after each bath
- Check that an acrylic bath does not move when you stand in it
- Protect the bath with a towel when doing jobs nearby
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath without abrasive products.
Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Take it off before we arrive.
How it works
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Plan for a morning or an afternoon. Before we go, we will explain when it can be used and how to care for it.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Tell us about any previous repairs or coatings
- Make sure the room can be ventilated
Get a quote
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Advice
Landlord and trade work in Avon Castle
For anyone letting property in or around Avon Castle, we will quote for several properties at once. Send pictures for each one and we will price them together.
For developers and builders, we fix damage before handover. Several plots can be done in one visit.
Common problems we fix in Avon Castle
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
Common reasons people in Avon Castle contact us include:
- Deep scratches in acrylic
- Rust spots around the plughole
- Impact holes in acrylic
- A failed DIY repair that’s discoloured or lifting
Questions to ask before booking
- Whether cleaning and preparation are in the price
- What aftercare is recommended
- Whether the colour is mixed to match
- How changes to the job are handled
About Avon Castle
Avon Castle is about 4 miles south-east of Verwood, in Hampshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We work in all 683 towns and villages in Hampshire, from the larger towns to small villages.
Postcode districts we cover here: BH24. From Avon Avenue, Avon Castle Drive and Egmont Drive or a nearby road, a technician can come to you. Neighbouring places we cover include Matchams (1 mile south-west), St Ives (1 mile north-west), Ashley Heath (2 miles north-west), St Leonards (2 miles west) and Woolsbridge (3 miles west). We also work in nearby towns such as Totton (15 miles north-east), Lymington (12 miles south-east), New Milton (8 miles south-east), Barton on Sea (9 miles south-east), Ashley (9 miles south-east) and Milford on Sea (12 miles south-east).
Around Avon Castle
Locally, our jobs take us to homes close to Ringwood School, St Ives Primary & Nursery School and Ringwood Waldorf School, among other places. Well-known places in the area include St Leonard's Hospital (2.3 miles west). The countryside around Avon Castle includes Linbrook Lake and St Catherine's Hill.
Also near Avon Castle
Also in Avon Castle
What affects the price in Avon Castle
Prices start from £95. We give every job a fixed price from photos. These are the things that affect it:
- How many items we do on one visit
- The material
- How much damage there is
- How easy the damage is to reach
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
How to get a fixed quote
Phone photos are fine. Make sure they show:
- Details of any past repairs
- A clear, close picture of the problem area
- Good light, ideally daylight, without flash glare
- The material, if you know it
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We will tell you honestly whether it can be repaired.
Different materials, different repairs
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
About our accreditations · Every repair comes with a one-year guarantee.
