Hampshire · England
Bath Repair in Milford on Sea
We travel to Milford on Sea for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Chips under the taps
- Rusty patches near the plughole
Bath repair in Milford on Sea without replacing anything
Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Our technicians work on roll-top & freestanding, acrylic and pressed steel enamel, and people most frequently call us about a failed DIY repair that’s discoloured or lifting and a cracked acrylic bath.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Milford on Sea (SO41)
- Area hub
- Hampshire
- Guarantee
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Repairing versus replacing in Milford on Sea
Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Prices start from £95. Set against the cost of replacement, repairing usually costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why choose Surface Doctor in Milford on Sea
- Usually one visit, start to finish
- CHAS and Constructionline accredited
- Dust sheets down, tidy finish
- Straight answers about what a repair can do
See our full price list or guide to resurfacing and replacement costs.
Milford on Sea and nearby
Milford on Sea is about 3 miles south-west of Lymington, in Hampshire. Anywhere in SO41, we carry out the work at your property. Our technicians cover all 683 towns and villages across Hampshire.
Our visits in SO41 work the same way as everywhere else we cover. That includes homes on High Street, Love Lane and Greenbanks Close. Neighbouring places we cover include Lymore (1 mile north-east), Keyhaven (1 mile east), Everton (1 mile north), Lower Pennington (2 miles north-east) and Pennington (2 miles north-east). Larger places within reach include Totton (14 miles north), Hythe (13 miles north-east), New Milton (4 miles north-west), Ringwood (12 miles north-west), Barton on Sea (3 miles west) and Dibden Purlieu (12 miles north-east).
Near you in Milford on Sea
Typical jobs here are in homes near Priestlands School, The Red Lion Public House and Church of All Saints. The closest station to Milford on Sea is Lymington Town station, about 3.4 miles north-east. Further afield, we also cover the area around Yarmouth Castle (4.3 miles east) and Lymington New Forest Hospital (3.6 miles north-east). For a walk, there is Milford on Sea LNR and Tennyson Down.
Places near Milford on Sea
More services for Milford on Sea
What affects the price in Milford on Sea
Prices start from £95. Each job gets its own fixed price. These are the things that affect it:
- The material
- Unusual colours or finishes
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
The price reflects the work involved, not where you live. You will see the full price before booking, with no extras added later.
Quotes from your pictures
A couple of clear pictures is all it takes. It helps if you send:
- The postcode, so we can plan the visit
- Natural light rather than flash
- A clear, close picture of the problem area
- Whether it’s been repaired or coated before
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price.
How it works
Arrival times are agreed in advance. On site, it takes a few hours for most jobs. The room is left tidy and you will know when it can be used.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- The repair is left to cure, and most baths can be used the day after.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Avoid using the area for a few hours before we arrive
- Let us know which floor the room is on
Ask for a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Advice
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Landlords, letting agents and housing providers in Milford on Sea use us as well as householders. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
Milford on Sea: your questions answered
Will the repair last?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
Can you quote from pictures?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
What information do you need?
A close-up, a wider photo and your postcode. After that, we just agree a date.
What areas do you cover?
All of Hampshire, and the rest of the UK. Travel is included in the price.
What happens after I send photos?
We review the photos and send a fixed quote.
When can I have a bath again?
Most baths can be used the following day. We will tell you the exact curing time when we finish.
Can you repair a crack in an acrylic bath?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Milford on Sea.
Repairs by material
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
When we would advise against a repair
A few problems are outside what a surface repair can do:
- A bath that moves underfoot, until its support is fixed
- Water coming from the waste or taps rather than the bath
- Acrylic cracks with no access behind them
If in doubt, send pictures and we’ll say what we think before you book.
Materials we work on in Milford on Sea
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
What we’re called out for in Milford on Sea
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
Send us a photo if you notice any of these:
- Impact holes in acrylic
- Rust by the waste and overflow
- A chipped rim or side
- Chips under the taps
What to look for in a quote
- Whether cleaning and preparation are in the price
- What happens if they find more damage
- How long it needs to cure
- A fixed quote, and whether VAT is included
How to care for the repair
Aftercare is simple:
- Fix dripping taps early to stop staining and limescale
- Have new chips seen to early
- Put a towel in the bath if you are working above it
- Rinse it down after each bath
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath without abrasive products.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and it can start to leak underneath.
About our accreditations · Every repair comes with a one-year guarantee.
