Pembrokeshire · Wales
Bath Repair in Axton Hill
We travel to Axton Hill for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Rust spots around the plughole
- A cracked acrylic bath
The process
Arrival times are agreed in advance, so you are not left guessing. Once we are there, the work takes a few hours for most jobs. We leave the room clean.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
Before we arrive
- Let us know which floor the room is on
- Ensure the area is dry
- Keep children and pets away from the room on the day
Ask for a price
For a price in Axton Hill, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Advice
Bath repair in Axton Hill without replacing anything
Whatever has happened to the bath, we aim for the same result: a repair that’s smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. We work on roll-top & freestanding, pressed steel enamel and whirlpool & spa baths, and people most often call us about chips caused by builders and chips under the taps.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Where
- Axton Hill (SA71)
- Area hub
- Pembrokeshire
- Guarantee
- One year on every repair
- Price
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
When to call us in Axton Hill
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
Typical reasons for a call-out include:
- Deep scratches in acrylic
- Holes from dropped items
- Chips under the taps
- Hairline or through cracks in acrylic
What to look for in a quote
- Whether there are any call-out or travel charges
- How long the guarantee is and what it covers
- What happens if they find more damage
- What preparation is included
Why repair rather than replace?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and the bathroom stays exactly as it is. Our bath repair starts from £95. The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.
Why Axton Hill clients choose us
- CHAS, Constructionline and SafeContractor accredited
- Rooms protected and left tidy
- One price list for the whole UK
- Every repair guaranteed for a year
Read our prices page and guide to resurfacing and replacement costs.
Keeping it looking good
Nothing complicated is needed:
- Do not leave razors or cans standing in the bath
- Get a dripping tap fixed promptly
- Use a soft cloth and washing-up liquid for everyday cleaning
- If an acrylic bath flexes, have its feet adjusted
Care for the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Take it off before we arrive.
Also near Axton Hill
More services for Axton Hill
Honest limits
Honesty matters more than a booking, so here’s what a repair can’t fix:
- A bath worn all over, where resurfacing makes more sense
- Cracks in acrylic we cannot reach from underneath
- Flexing caused by a failed cradle or loose feet
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we repair
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
Questions from Axton Hill
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
When can I have a bath again?
Generally the following day. We’ll tell you the exact curing time when we finish.
I tried a repair kit. Can you fix it?
Yes. We take out the old repair and do it properly. Mention it when you send photos.
How much does bath repair cost in Axton Hill?
Repairs from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Will the repair show?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath, and we will tell you what to expect.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
What areas do you cover?
Everywhere in the UK, Axton Hill included. Travel is included in the price.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Repairs by material
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.
Where we work around Axton Hill
Axton Hill is about 4 miles south-west of Pembroke, in Pembrokeshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We work in all 223 towns and villages across Pembrokeshire.
Our technicians cover all of SA71. Streets in the area include Windmill Lane and Axton Hill. We also cover the places around Axton Hill: Warren (1 mile south-west), St Twynnells (1 mile south-east), Merrion (1 mile south-east), Stackpole and Castlemartin (2 miles south) and Hundleton (2 miles north-east). Further out, we also cover Haverfordwest (11 miles north), Milford Haven (5 miles north-west), Pembroke (4 miles north-east), Pembroke Dock (4 miles north-east), The Marsh (11 miles north) and Dinbych-y-Pysgod (12 miles east).
Around Axton Hill
In Axton Hill, that means homes near St. Mary's Church, among other places. The closest station to Axton Hill is Pembroke Dock station, about 3.8 miles north-east. Well-known places in the area include Museum of The Home (3.5 miles north-east) and South Pembrokeshire Hospital (3.4 miles north). Green spaces nearby include Stackpole Estate and Crickmarren Hill.
Work for landlords and builders
We work for landlords, letting agents and housing providers in Axton Hill as well as householders. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
About our accreditations · Every repair comes with a one-year guarantee.
