Herefordshire · England
Bath chip & crack repair in Aymestrey, Herefordshire
Bath repair in Aymestrey without the cost of replacing. Send us photos for a fixed quote, then book a visit.
- Repairs from £95
- Cracks in an acrylic bath
- Holes from dropped items
How we price bath repair
Prices start from £95. You won’t pay by the hour. The price is based on:
- The material and finish
- Access to the area
- How much damage there is
- How many items we do on one visit
Our prices are the same across the UK, so there’s no premium for Aymestrey. The job itself decides the price: the material, the amount of damage and how many items.
Send photos for a quote
Two or three clear pictures are normally enough. Try to include:
- A photo taken from further back
- One sharp close-up of the damage
- Details of any past repairs
- Something in shot to show the size
Send us pictures of the damage and a wider shot of the whole item, and tell us you’re in Aymestrey, and we will come back with a fixed quote.
Bath repair in Aymestrey, done in place
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. A repair stops both. We work on roll-top & freestanding, acrylic and whirlpool & spa baths, and common reasons people contact us are chips on the rim or sides and chips under the taps.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Aymestrey (HR6)
- County
- Herefordshire
- Cover
- One year on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How to care for the repair
Once the work has cured, treat it gently:
- Clean with warm water and a mild detergent
- Get any new chip repaired before it rusts
- Rinse the bath after use, especially in hard water areas
- A dripping tap stains enamel, so fix it early
A repaired bath needs no special treatment, beyond gentle cleaning. Skip bleach and gritty creams and rinse after use.
Until we visit, a strip of waterproof tape over the damage helps, so water can’t get in. Take it off before we arrive.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
Towns and villages near Aymestrey
What else we do in Aymestrey
Where we work around Aymestrey
Aymestrey is about 16 miles north of Hereford, in Herefordshire. Our technicians come to clients in Aymestrey and nearby villages, so you don’t need to take anything anywhere. Aymestrey is one of 255 towns and villages in Herefordshire we cover. We work right across the region, from Aymestrey to Birmingham (about 42 miles away).
Every address in HR6 is within our area, from the main roads to the quietest streets. Close by, we cover Lucton (1 mile south-east), Mortimer's Cross (1 mile south), Kingsland (2 miles south-east), Shobdon (3 miles south-west) and Cobnash (3 miles south-east). We also work in nearby towns such as Leominster (6 miles south-east), Bromyard (15 miles south-east), Kington (9 miles south-west), Bobblestock (15 miles south), Holmer (15 miles south) and Credenhill (13 miles south).
Local landmarks in Aymestrey
Our customers here include homes close to Riverside Inn and Church of St John the Baptist and St Alkmund. Further afield, we also cover the area around Croft Castle (1.6 miles east). Not far away are Dionscourt Hill.
Should you replace it?
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. Where the entire surface is tired, we may suggest re-enamelling instead. Our bath repair starts from £95. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- Normally one visit, start to finish
- Colours mixed by hand to suit your surface
- Straight answers about what a repair can do
Read our full price list or resurfacing vs replacement cost guide.
Work for landlords and builders
If you manage property in Aymestrey, we will quote for several properties at once. Just send photos for each address and we’ll come back with a combined price.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
Questions from Aymestrey
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Can you fix rust around the plughole?
Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.
Will I be able to see the repair?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference, and we will tell you what to expect.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
What does bath repair cost?
Prices start from £95. Every job gets a fixed price based on pictures of the damage. Send a close-up and a picture of the whole item with your HR6 postcode.
Can you repair a crack in an acrylic bath?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Something went through my bath. Can it be fixed?
Usually. Send us a photo of the hole and one from under the bath if you can.
What we are called out for in Aymestrey
Rust normally starts where water sits, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
These are the problems we are asked about most:
- A chip where the taps sit
- Deep scratches in acrylic
- A chipped rim or side
- Holes from dropped items
What your quote should include
- Is the price fixed, and does it include VAT?
- Who will actually do the work
- How the colour is matched
- How soon you can use it again
What happens on the day
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, put protection down and start once you’re happy with the plan. It generally takes a few hours, depending on the damage, and you can get on with other things while we’re there.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can usually use the bath the following day.
Getting ready for the visit
- Let us know if it has been repaired before
- Avoid using the area for a few hours before we arrive
- Let us know which floor the room is on
Ask for a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Related advice
What a repair can’t fix
It helps to know what we can’t do too:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Acrylic cracks with no access behind them
- Wear across the whole surface, which needs re-enamelling
If in doubt, send photos and we will say what we think.
What we work on
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
About our accreditations · Every repair comes with a one-year guarantee.
