Herefordshire · England
Bath Repair in Lucton
Bath repair across Lucton and nearby, generally in one visit.
- Repairs from £95
- Rusty patches near the plughole
- A chip where the taps sit
How we handle bath repair in Lucton
Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. If you are dealing with damage done while the bathroom was being fitted and scratches you can feel with a fingernail, we can generally put it right, on acrylic, roll-top & freestanding and whirlpool & spa baths alike.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Area
- Lucton (HR6)
- Region
- Herefordshire
- Cover
- 12 months on all our work
- Price
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Signs you need bath repair in Lucton
A cracked acrylic bath generally wasn’t supported properly. Legs that aren’t adjusted, a missing cradle or a soft floor let the bath move until the acrylic gives way.
Keep an eye out for these signs:
- Holes from dropped items
- A kit repair that didn’t last
- Scratches you can feel with a fingernail
- A cracked acrylic bath
Questions to ask before booking
- Whether the colour is mixed to match
- If travel is included in the price
- What happens if the damage is worse than the photos show
- What prep work is covered
What affects the price in Lucton
Repairs from £95. Quotes are free and the price is fixed. What we take into account:
- Whether we combine several jobs
- Previous DIY repairs that have to come out
- How much damage there is
- Whether it’s a chip, crack, burn or wear
Our prices are the same across the UK, so there is no premium for Lucton. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Quotes from your photos
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Good light, ideally daylight, without flash glare
- One picture of the whole bath
- Something in shot to show the size
- Any details about the material
You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
The process
On the day itself, there’s little for you to do. Let us in and show us the room, and we will take it from there. Most visits take a morning or an afternoon.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, generally the day after.
Before we arrive
- Let us know which floor the room is on
- Point us to the nearest place to park
- Plan for the room to be out of bounds to pets and children
Getting a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.
Read more
Questions from Lucton
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do the materials smell?
There may be a mild smell during the work that clears as it cures.
What if the damage is worse than the photos show?
The price is fixed for what the photos show. If there’s more, we will tell you before starting.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Is a repair better than a new one?
Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
How do I get a price for bath repair in Lucton?
Repairs from £95. Every job gets a fixed quote based on pictures of the damage. Send a close-up and a picture of the whole item and your postcode.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one, so mention it when you send pictures.
How to care for the repair
It’s all simple stuff, just a few sensible habits:
- Stick to mild cleaners and a soft cloth
- Do not scrub with anything abrasive
- Check that an acrylic bath does not move when you stand in it
- Store metal items away from the bath
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.
If water is getting through a crack, stop using the bath. Leaks under a bath can damage floors and ceilings.
Covering Lucton
Lucton is about 16 miles north of Hereford, in Herefordshire. From the centre of Lucton to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Lucton is one of 255 places in Herefordshire we cover. Our jobs stretch from Lucton to Birmingham (about 42 miles away).
Our visits in HR6 work the same way as everywhere else we cover. From Church Road, St Peter's Square and Lucton Lane or anywhere nearby, we can come to you. Nearby, we also work in Aymestrey (1 mile north-west), Mortimer's Cross (1 mile south-west), Kingsland (2 miles south), Cobnash (2 miles south) and Shobdon (3 miles south-west). Within a short drive, we also cover Leominster (5 miles south-east), Whitecross (15 miles south), Widemarsh (15 miles south), Bromyard (14 miles south-east), Kington (10 miles south-west) and Aylestone Hill (15 miles south).
Landmarks near Lucton
Typical jobs here are in homes near Mortimers' Cross Inn and Church of St John the Baptist and St Alkmund, among other places. Further afield, we also cover the area around Croft Castle (1.1 miles north-east). For a walk, there’s Dionscourt Hill.
Towns and villages near Lucton
What else we do in Lucton
For landlords and businesses
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, just like other baths.
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Repair or replace in Lucton?
Replacing a bath rarely stops at the bath: tiles along the rim generally crack when it comes out, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Repairs from £95, with every job priced individually. A repair normally costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Why us?
- Same prices wherever you are
- Colours mixed by hand to suit your surface
- We leave the room as we found it
- Repair technicians who travel to you, UK-wide
Read our prices page or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
