Fife · Scotland

Bath chip & crack repair in Baintown, Fife

Chip and crack repairs to enamel, acrylic and cast iron baths in Baintown, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • Chips under the taps
  • A hole punched through by something heavy
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Baintown

Bath repair in Baintown, done in place

We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath. You can typically use the bath the day after. If you’re dealing with rust spots around the plughole and holes from dropped items, we can usually put it right.

A one-year guarantee comes as standard.

Where
Baintown (KY8)
Area hub
Fife
Warranty
12 months on all our work
Quote
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Page updated
23 October 2026
Before and after: a damaged acrylic bath corner repaired in place

Repairs by material

Acrylic

Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.

Cast iron

Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.

Looking after it afterwards

Good habits make a big difference to how long a repair lasts. Here’s what we suggest:

  • Rinse it down after each bath
  • Have new chips seen to early
  • Stick to mild cleaners and a soft cloth
  • Keep abrasive pads and gritty cleaners away from the bath

Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.

A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.

How it works

We work cleanly and quietly, so you can carry on at home. We protect the area first, then the work takes a morning or an afternoon. Before we leave, we explain the curing time and the aftercare.

  1. We start by looking at the damage and confirming the plan with you.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. We build up the filler in layers, shaping it to the bath.
  4. We tint the finish by hand to match the bath.
  5. The repair is polished to the same gloss as the bath and left to cure.

How to prepare

  • Move bottles, mats and clutter away from the area
  • Tell us if there are stairs or a lift
  • Keep a parking space free if you can

Getting a price

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.

Send pictures for a quote

Related advice

Prices and what affects them

Repairs from £95. You will not pay by the hour. The price depends on:

  • How hard the colour is to match
  • How many areas need work
  • The type of damage
  • Any earlier repairs that need removing first

Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.

Send photos for a quote

We price nearly every job from pictures. This is what we need:

  • Any earlier repairs or coatings
  • What it’s made of, if you know
  • A coin beside the damage so we can judge size
  • Natural light rather than flash

For a price in Baintown, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.

Why repair rather than replace?

Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Our bath repair starts from £95. The price reflects the work involved, not your postcode. You will see the full price before you book, with no extras added later.

Why choose Surface Doctor in Baintown

  • One visit for most repairs
  • Colours mixed by hand to suit your surface
  • Work done at your home or business
  • We leave the room as we found it

Take a look at our full price list or resurfacing vs replacement cost guide.

Can I fix it myself?

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

What a repair cannot fix

Before you book, it’s worth knowing the limits too:

  • Cracks in parts of an acrylic bath we can’t get to from below
  • Rust that has eaten right through a steel bath
  • A whole bath that is dull or worn, where a full re-enamel is the better fix

Not sure? Send pictures and we’ll give you a straight answer.

Materials we repair

  • Acrylic
  • Pressed steel enamel
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Cast iron enamel

Work for landlords and builders

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.

Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Our work in Baintown

Baintown is about 2 miles north of Methil, in Fife. We travel to homes and businesses in Baintown, so nothing has to leave your home. Baintown is one of 133 places in Fife where we work. Our nearest city page is Edinburgh, about 19 miles away.

Postcode districts we cover here: KY8. That includes homes on New Road, Leven Road and Cupar Road and the roads around them. We also travel to Kennoway (1 mile north-west), Bonnybank (1 mile north), Windygates (1 mile south-west), Methil (2 miles south) and Leven (2 miles south-east). We also work in nearby towns such as Kirkcaldy (8 miles south-west), Glenrothes (5 miles west), St Andrews (12 miles north-east), Cowdenbeath (14 miles south-west), Dysart (7 miles south-west) and Cupar (8 miles north).

Around Baintown

Our clients here include homes close to Kirkland High School and Community College and Kennoway and the streets around them. Baintown’s nearest station is Cameron Bridge station, about 1.4 miles south of the centre. A little further out are Cameron Hospital (1.7 miles south) and Aithernie Castle (1.7 miles north-east). The countryside around Baintown includes Largo Law.

Map of Baintown © OpenStreetMap contributors

Questions from Baintown

Is it safe with children and pets around?

Yes, as long as they stay out of the room we are working in. We’ll let you know when it’s safe to use again.

Will there be a smell?

Expect a mild smell while we are working.

When can you do it?

We’ll give you dates with your quote. Tell us if you need it done quickly.

Do you hold any accreditations?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time that suits you.

How do I book?

Send photos through the quote form or call 0345 017 0787.

Can you redo someone else’s repair?

Generally, yes. Let us know what was used before.

How long before I can use the bath?

Usually the next day. We confirm the time before we leave.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.