East Sussex · England

Bath Repair for Barcombe Cross homes

Chip and crack repairs to enamel, acrylic and cast iron baths in Barcombe Cross, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • Hairline or through cracks in acrylic
  • Chips along the edge of the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Barcombe Cross

Bath repair in Barcombe Cross, done in place

We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place with a one-year guarantee. We’re often asked to fix a chip where the taps sit and deep scratches in acrylic, in pressed steel enamel, acrylic and cast iron enamel.

The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.

Rusty chip next to a bath plughole, before and after repair
Where
Barcombe Cross (BN8)
Region
East Sussex
Warranty
12 months on all our work
Quotes
From £95. Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026

How it works

We begin by going over the job with you, so you know exactly what we are doing. Next, we cover and mask everything nearby and the work begins. It normally takes a few hours, and we’ll tell you if anything changes.

  1. We protect the bath and the floor around it.
  2. The damaged area is cleaned, keyed and degreased.
  3. Filler goes in and is sanded flush once it has set.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the following day.

Before we arrive

  • Move bottles, mats and clutter away from the area
  • Mention any earlier repairs or resurfacing
  • Let us know about parking or access

Ask for a price

To get a price, send a couple of photos using our quote form or call us. We will say immediately whether it can be repaired.

Send pictures for a quote

Related advice

Common problems we fix in Barcombe Cross

Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.

Common reasons people in Barcombe Cross contact us include:

  • Holes from dropped items
  • Snagging damage from a refit
  • An old repair that has yellowed or come loose
  • Damage beneath the taps

What to look for in a quote

  • Aftercare advice
  • Who will actually do the work
  • Whether cleaning and preparation are in the price
  • Is the price fixed, and does it include VAT?

10 questions to ask before booking

Why repair rather than replace?

When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. If the whole surface is worn, re-enamelling may make more sense, and we’ll tell you. Our bath repair starts from £95. The price reflects the work involved, not your postcode. You’ll see the full price before booking, with no extras added later.

Why us?

  • No need to remove anything
  • Honest advice, even when it means no job
  • Colours mixed by hand to suit your surface
  • CHAS, Constructionline and SafeContractor accredited

Read our full price list or resurfacing vs replacement cost guide.

When we’d advise against a repair

A few problems are outside what a surface repair can do:

  • Cracks in acrylic we can’t reach from underneath
  • Wear across the entire surface, which needs re-enamelling
  • Metal that has corroded all the way through

Not sure? Send photos and we’ll give you a straight answer.

Materials we work on in Barcombe Cross

  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Cast iron enamel
  • Pressed steel enamel
  • Acrylic

Barcombe Cross and nearby

Barcombe Cross is about 3 miles north of Lewes, in East Sussex. Clients in Barcombe Cross get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. We work in 289 places in East Sussex, from the larger towns to small villages. You can also see our page for London, about 40 miles away.

Here we cover the BN8 postcode area. Streets in the area include High Street, Grange Road and Weald Close, and we cover them all. Neighbouring places we cover include Barcombe (1 mile south), Mount Pleasant (1 mile north-east), Barcombe Mills (1 mile south-east), Upper Wellingham (2 miles south-east) and Cooksbridge (2 miles south-west). Larger places within reach include Eastbourne (15 miles south-east), Seaford (11 miles south), Lewes (3 miles south), Hailsham (11 miles east), Crowborough (11 miles north-east) and Uckfield (5 miles north-east).

Around Barcombe Cross

Typical jobs here are in homes near Chailey School, Royal Oak pub and St Francis of Assisi and the streets around them. The nearest railway station is Cooksbridge station, roughly 1.9 miles south-west. A little further out are Museum of Agricultural Bygones (3.7 miles south-east) and Lewes Victoria Hospital (3.6 miles south). The countryside around Barcombe Cross includes Malling Down and Offham Hill.

Map of Barcombe Cross © OpenStreetMap contributors

Work for landlords and builders

We carry out planned and one-off repairs for housing associations and facilities teams in East Sussex and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.

What affects the price in Barcombe Cross

Repairs from £95. There are no hourly rates or hidden extras. The price depends on:

  • Whether it’s a chip, crack, burn or wear
  • The colour and finish to match
  • The size and number of damaged areas
  • Whether we combine several jobs

No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.

Quotes from your photos

Phone pictures are fine, there is no need for anything special. Just make sure we can see:

  • A photo taken from further back
  • Something in shot to show the size
  • One sharp close-up of the damage
  • Where you are, by postcode

No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Materials and what they mean for the repair

Composite and resin

Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, just like other baths.

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

FAQs for Barcombe Cross

How quickly can you book me in?

It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.

How long does the repair take to cure?

Generally the next day. We will tell you the exact curing time when we finish.

Is a cracked acrylic bath repairable?

Generally, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a picture.

Is there a guarantee?

Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.

Can you price it without visiting?

Nearly always. If photos don’t show enough, we’ll ask for another angle.

Do you cover Barcombe Cross?

We do. We send a technician to Barcombe Cross for every job, and the price is the same as everywhere else.

How invisible is a bath repair?

On a bath in good condition, a colour-matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.

Do the materials smell?

Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.

How to care for the repair

A little care keeps the finish looking good. We recommend:

  • Have new chips seen to early
  • Stick to mild cleaners and a soft cloth
  • Keep abrasive pads and gritty cleaners away from the bath
  • Give the bath a quick rinse after use

Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.

A small chip is a quick job. Left alone, they stain and can rust, so early repair saves time and money.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.