Greater London · England

Bath Repair for Barnehurst homes

Bath repair in Barnehurst without the cost of replacing. Send us pictures for a fixed price, then book a visit.

  • Repairs from £95
  • Snagging damage from a refit
  • Deep scratches in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Barnehurst

What we do, step by step

We work cleanly and quietly. We protect the area first, then the work takes two to three hours for most chips. At the end we talk you through how soon it can be used and how to look after it.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. The colour is mixed on the spot to match your bath.
  4. We apply the finish coats and polish the repair so it blends in.
  5. Once it has cured, typically by the day after, the bath is ready to use.

How to prepare

  • Tell us about parking, stairs or access
  • Clear the area around the damage
  • Avoid using the area for a few hours before we arrive

Getting a price

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job.

Get a free quote

Related advice

Bath repair at your home in Barnehurst

Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. Nothing is unplumbed, the tiles aren’t touched, and the repaired area is colour-matched so it blends in. If you’re dealing with a hole punched through by something heavy and a failed DIY repair that’s discoloured or lifting, we can help.

We stand behind the work with a one-year guarantee, so you’re not left on your own once we have gone.

Bath enamel chip by the waste, filled and colour matched (before and after)
Location
Barnehurst (DA7, DA1, DA8)
Region
Greater London
Cover
One year on every repair
Price
From £95. Fixed and free, based on photos
Call
0345 017 0787
Last updated
23 October 2026

Repair or replace: which is better?

A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and the bathroom stays exactly as it is. Prices start from £95. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

Why Barnehurst clients choose us

  • Normally one visit, start to finish
  • CHAS and Constructionline accredited
  • Fixed prices from your pictures
  • Same prices wherever you are

Take a look at our pricing and guide to resurfacing and replacement costs.

What we’re called out for in Barnehurst

Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Fittings cause damage too: water collects there, so chips nearby rust quickly.

Send us a picture if you notice any of these:

  • Cracks in an acrylic bath
  • A chip where the taps sit
  • Chips caused by builders
  • A hole punched through by something heavy

What to look for in a quote

  • Whether the price covers travel
  • Whether the colour is mixed to match
  • A fixed price, and whether VAT is included
  • What aftercare is recommended

Choosing a repair company

Our work in Barnehurst

Barnehurst is about 3 miles east of Welling, in Greater London. Clients in Barnehurst get the same service as everywhere else we cover: a fixed quote from your pictures, then a visit to do the work. Our technicians cover 764 places in Greater London. Our jobs stretch from Barnehurst to London (12 miles away).

Postcode districts we cover here: DA7, DA1 and DA8. We regularly work on streets such as Old Road, Grove Road and Manor Road and the roads around them. Being close to the A2000, Barnehurst is easy for our technicians to reach. Other places close to Barnehurst include Bexley Riverside (1 mile north), Northumberland Heath (1 mile north), Crayford (1 mile south-east), North End (1 mile east) and Barnes Cray (1 mile east). Further out, we also cover London (12 miles west), City of Westminster (14 miles west), Marylebone (14 miles west), St Pancras (13 miles west), Shoreditch (12 miles north-west) and Walthamstow (12 miles north-west).

What’s near Barnehurst

Around Barnehurst, we work in homes near Mayplace Primary School, St Catherine's Catholic School and Church of St Paulinus, among other places. Also close by are The Red Barn pub (0.5 miles north-west), St Catherine's Catholic School (0.7 miles south-west) and Braeburn Park (1.1 miles south). The closest station to Barnehurst is Barnehurst station, about 0.5 miles north-west. Other landmarks nearby include Bexley Museum (1 mile south) and Erith and District Hospital (1.1 miles north). Green spaces nearby include Wansunt Pit.

  • Parks and local facilities nearby include Colyers (0.7 miles north)
Map of Barnehurst © OpenStreetMap contributors

Keeping it looking good

Simple care helps the repair last. Our advice:

  • Check that an acrylic bath doesn’t move when you stand in it
  • Cover the bath during DIY or decorating
  • Store metal items away from the bath
  • Clean with warm water and a mild detergent

Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.

Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.

What we can’t put right

A repair is not always the answer, and we would rather say so up front. Repairs will not solve:

  • Cracks in parts of an acrylic bath we cannot get to from below
  • A bath worn all over, where resurfacing makes more sense
  • A steel bath rusted through

Send us pictures and we will tell you honestly.

Materials we repair

  • Roll-top & freestanding
  • Acrylic
  • Whirlpool & spa baths
  • Pressed steel enamel
  • Cast iron enamel

Common questions in Barnehurst

Do you work in Barnehurst?

Yes. We work across the UK and come to Barnehurst and the rest of Greater London. Send photos and we’ll quote, or call 0345 017 0787.

What information do you need?

Some pictures, your postcode and how to reach you. On the day, access to the room.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Can you fix rust around the plughole?

Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.

I tried a repair kit. Can you fix it?

Yes. We take out the old repair and do it properly. Mention it when you send pictures.

Is my repair covered?

Yes, for a year. If there is a problem with the work in that time, we come back and put it right.

How long does the repair take to cure?

Typically the next day. We’ll tell you the exact curing time when we finish.

Is it OK to have pets in the house?

Yes, as long as they stay out of the room we are working in. We’ll let you know when it’s safe to use again.

Work for landlords and builders

For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.

Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

What affects the price in Barnehurst

Prices start from £95. Quotes are free and the price is fixed. What we take into account:

  • Unusual colours or finishes
  • How many areas need work
  • Access to the area
  • Whether old repairs or coatings need taking off

Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it.

Send photos for a quote

A couple of clear pictures is all it takes. Try to include:

  • What it’s made of, if you know
  • Your postcode, so we can check dates
  • One picture of the whole bath
  • Something in shot to show the size

The quickest way to a price is to send two or three pictures through our quote form or call us. We will tell you honestly whether it can be repaired.

DIY kit or professional repair?

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

If you do try a kit, read the instructions carefully, and give it the full curing time. If it does not work out, we can still repair it properly.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.