Kent · England

Bath chip & crack repair in Barnes Cray, Kent

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Barnes Cray, with a one-year guarantee on every repair.

  • Repairs from £95
  • Scratches you can feel with a fingernail
  • Snagging damage from a refit
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Barnes Cray homes

Bath repair in Barnes Cray, done in place

Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. Common call-outs are for a chip where the taps sit and snagging damage from a refit, in whirlpool & spa baths, roll-top & freestanding and acrylic.

Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.

Where
Barnes Cray (DA1, DA8)
Area hub
Kent
Guarantee
One year on every repair
Quote
From £95. Free and fixed, from your pictures
Phone
0345 017 0787
Updated
23 October 2026
Broken acrylic bath corner, rebuilt and refinished (before and after)

How to care for the repair

Much of the damage we repair could have been avoided. These habits help:

  • Give the bath a quick rinse after use
  • Check that an acrylic bath does not move when you stand in it
  • Avoid scourers, wire wool and gritty cream cleaners
  • Clean with warm water and a mild detergent

Leave the repair to cure for as long as we say before using the bath. From then on, mild cleaning is all it needs.

Small chips are quick to repair. Left alone, they stain and can rust, so early repair saves time and money.

Your questions about bath repair in Barnes Cray

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as householders.

What areas do you cover?

The whole UK, including all of Kent. Just include your postcode and we’ll confirm dates.

Is my repair covered?

All our work carries our one-year guarantee. We will explain what it covers when we quote.

How quickly can you book me in?

Your quote comes with available dates. Tell us if you need it done quickly.

Do you charge for travel?

We don’t add a call-out fee. Your fixed price includes everything.

Will it make a mess?

No. The work area is masked and covered, and we take our waste away with us.

Can I get a quote without a visit?

Normally, yes. A close-up and a wider photo are enough to give a fixed price.

Can you repair a failed DIY repair?

Yes. We remove the old filler and start again. Mention it when you send photos.

When a repair is not the answer

A repair is not right for every job, for example:

  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • Cracks in acrylic we cannot reach from underneath
  • Metal that has corroded all the way through

If in doubt, send photos and we’ll say what we think before you book.

Surfaces we repair

  • Cast iron enamel
  • Pressed steel enamel
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Acrylic

Prices and what affects them

Prices start from £95. Every quote is fixed and free. What we take into account:

  • Whether it’s a chip, crack, burn or wear
  • Whether old repairs or coatings need taking off
  • How easy the damage is to reach
  • What the surface is made of

Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Quotes from your pictures

The better the pictures, the more accurate the price. Here’s what helps:

  • The material, if you know it
  • Something in shot to show the size
  • Where you are, by postcode
  • One sharp close-up of the damage

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.

Where we work around Barnes Cray

Barnes Cray is about 2 miles north-west of Dartford, in Kent. Jobs in Barnes Cray are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. We cover 922 places across Kent. You can also see our page for London, about 13 miles away.

We cover every part of the DA1 and DA8 postcode area. Jobs here include addresses on Stour Road, Wilmot Road and Maiden Lane. We also travel to Slade Green (1 mile north), North End (1 mile north), Crayford (1 mile south-west), Barnehurst (1 mile west) and Bexley Riverside (1 mile north-west). We also work in nearby towns such as Sevenoaks (12 miles south), Gravesend (8 miles east), Northfleet (7 miles east), Swanley (4 miles south), Swanscombe (4 miles east) and Windmill Hill (8 miles east).

Near you in Barnes Cray

Our clients here include homes close to Christ Church, Braeburn Park and Bird in Hand pub. You’ll also find Haberdashers' Aske's Crayford Academy (within half a mile west) and Holy Trinity Church of England Primary School (0.6 miles south-east). The nearest railway station is Slade Green station, about 0.7 miles north of the centre. Other landmarks nearby include Broadway Shopping Centre (2.2 miles west) and West Hill Hospital (1 mile south-east). Not far away are Wansunt Pit.

  • Parks and local facilities nearby include Colyers (1.3 miles north-west)
Map of Barnes Cray © OpenStreetMap contributors

When to call us in Barnes Cray

Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.

These are the problems we’re asked about most:

  • A hole punched through by something heavy
  • Rust spots around the plughole
  • Scuffs and scratches in the surface
  • Damage done while the bathroom was being fitted

What to look for in a quote

  • Whether the colour is mixed to match
  • What aftercare is recommended
  • Whether a trained technician does the job
  • How long it needs to cure

How to compare quotes

Should you replace it?

For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it’s done in one visit, and the bathroom stays exactly as it is. Repairs from £95, with every job priced individually. We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

What you get with us

  • One price list for the entire UK
  • Repair technicians who travel to you, UK-wide
  • Normally one visit, start to finish
  • A fixed quote before booking

See our pricing or bath cost comparison.

Can I fix it myself?

If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

How it works

You don’t need to empty the room beforehand. Everything we use comes in the van with us, lay protective sheets and start once you’re happy with the plan. Most jobs take a few hours, depending on the damage, and you’re welcome to carry on with your day while we work.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. Next we fill the damage and sand it smooth and level.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. We build up the finish and polish it into the surrounding enamel.
  5. We leave it to cure; you can usually use the bath the following day.

Getting ready for the visit

  • Clear toiletries, mats and anything else from around the area
  • Let the surface dry out before the visit
  • Keep a parking space free if you can

Getting a price

Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and you’re under no obligation.

Send photos for a quote

Read more

What your bath is made of matters

Composite and resin

Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, in much the same way.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.