Greater London · England
Bath chip & crack repair in Barnes, Greater London
Damaged bath in Barnes? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- A hole punched through by something heavy
- A failed DIY repair that is discoloured or lifting
Aftercare tips
So the finish stays in good condition for years:
- Get a dripping tap fixed promptly
- Rinse the bath after use, especially in hard water areas
- Do not leave a fresh chip for long
- Use a soft cloth and washing-up liquid for everyday cleaning
Keep metal objects like razors and cans off the surface, as they can leave rust marks. And fix dripping taps promptly.
Tape over a fresh chip or crack until it’s repaired, so water can’t get in. Remove it before the repair.
Bath repair at your home in Barnes
You do not need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day. We are often asked to fix a failed DIY repair that’s discoloured or lifting and cracks in an acrylic bath, in cast iron enamel, acrylic and roll-top & freestanding.
Every repair comes with our one-year guarantee, wherever you are in Greater London.
- Where
- Barnes (SW13, SW15, SW14)
- Area hub
- Greater London
- Cover
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour matched, just like other baths.
Barnes and nearby
Barnes is about 2 miles west of Fulham, in Greater London. We agree a date that works for you, and you will know when to expect us, so you are not left waiting in all day. Barnes is one of 764 towns and villages in Greater London where we work. We work right across the region, from Barnes to London (about 7 miles away).
All of SW13, SW15 and SW14 is within our area. Jobs here include addresses on Church Road, Station Road and Barnes High Street and the roads around them. Barnes is on the A306 and B349, which makes it straightforward to reach. Neighbouring places we cover include Old Chiswick (1 mile north), Turnham Green (1 mile north-west), Mortlake (1 mile south-west), East Sheen (1 mile south-west) and Putney (1 mile south-east). We also work in nearby towns such as London (7 miles east), City of Westminster (5 miles north-east), Marylebone (5 miles north-east), Kensington (3 miles north-east), St Pancras (7 miles north-east) and Shoreditch (8 miles north-east).
Around Barnes
Locally, our jobs take us to homes close to Polish Library POSK in London, St Osmund's Catholic Primary School and The Harrodian School, among other places. Nearby too are Barnes Methodist Church (under half a mile south-west), Sun Inn (less than half a mile west), Chiswick School (0.9 miles north-west) and Barn Elms (0.6 miles east). There’s a railway station in Barnes itself: Barnes Bridge station. Other landmarks nearby include Putney Exchange (1.4 miles south-east) and Municipal Borough of Acton (2.5 miles north-west). For a walk, there is Richmond Hill and Kew Gardens Lake.
Repair or replace: which is better?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. Where the entire surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed quote from your pictures, so you know the cost before booking.
Why choose Surface Doctor in Barnes
- A fixed quote before you book
- One price list for the entire UK
- CHAS and Constructionline accredited
- We’ll tell you if it’s not worth repairing
Read our full price list and resurfacing vs replacement cost guide.
Your questions about bath repair in Barnes
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
Can you redo someone else’s repair?
Most of the time. Let us know what was used before.
Is there a call-out fee?
We do not add a call-out fee. The fixed price covers the visit and the work.
What do you need from me?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Will I be able to see the repair?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference.
Can you redo an old repair?
Yes. We remove the old filler and start again. Mention it when you send photos.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- Wear across the whole surface, which needs re-enamelling
- A bath that moves underfoot, until its support is fixed
- Leaks from the waste or overflow fittings (a plumber’s job)
Send us pictures and we will tell you honestly before you book.
Materials we repair
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
Signs you need bath repair in Barnes
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
The most common problems we’re called about are:
- Holes from dropped items
- Deep scratches in acrylic
- Chips on the rim or sides
- Damage beneath the taps
Questions to ask before you book
- When it can be used again
- What prep work is covered
- How long the guarantee is and what it covers
- Aftercare advice
How the visit works
You do not need to empty the room beforehand. We bring everything we need with us, put protection down and get going once we have agreed what we’re doing. It generally takes a morning or an afternoon, and you can get on with other things while we are there.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the next day.
Preparing for the visit
- Let us know if it has been repaired before
- Have somewhere for us to park nearby if possible
- Mention any parking restrictions or tricky access
How to get a price
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.
Advice
Towns and villages near Barnes
More services for Barnes
Can I fix it myself?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Landlord and trade work in Barnes
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
About our accreditations · Every repair comes with a one-year guarantee.
