Vale of Glamorgan · Wales

Bath chip & crack repair in Barry, Vale of Glamorgan

Our technicians come to Barry for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.

  • Repairs from £95
  • A cracked acrylic bath
  • Impact holes in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Barry

DIY repairs versus a professional job

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

How we handle bath repair in Barry

Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. If you’re dealing with a chipped rim or side and an old repair that has yellowed or come loose, we can usually put it right, on pressed steel enamel, roll-top & freestanding and acrylic alike.

Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.

Broken acrylic bath corner, rebuilt and refinished (before and after)
Area
Barry (CF62, CF63, CF64)
County
Vale of Glamorgan
Cover
12 months on all our work
Quotes
From £95. Free, fixed price from pictures
Call
0345 017 0787
Page updated
23 October 2026

How it works

Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, then carry out the work, which usually takes two to three hours for most chips. If we find something your photos didn’t show, we will explain it before carrying on.

  1. First, we check the damage against your photos and agree the plan.
  2. Any rust and loose material comes out, and the area is degreased.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

Getting ready for the visit

  • Let us know if it has been repaired before
  • Tell us if there are stairs or a lift
  • Plan for the room to be out of bounds to pets and children

Get a quote

Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and you’re under no obligation.

Send photos for a quote

Advice

Questions from Barry

How invisible is a bath repair?

The goal is a repair that blends in. The rest of the bath’s condition makes a difference, and we will tell you what to expect.

Can you fix rust around the plughole?

Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.

Can tenants book a repair?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

What happens if you find more damage?

We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.

Is the work guaranteed?

Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.

Do you come to Barry?

Yes. We work across the UK and come to Barry. Send us pictures for a fixed quote, or call 0345 017 0787.

Is a repair better than a new one?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.

Are there extra charges for Barry?

No. Our quotes include travel, and we charge the same wherever you are.

Where we work around Barry

Barry (Welsh: Barri) is about 7 miles south-west of Cardiff, in the Vale of Glamorgan. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We work in all 67 towns and villages in the Vale of Glamorgan, from the larger towns to small villages.

Our technicians cover all of the CF62, CF63 and CF64 postcode area and the streets around it. You’ll find streets such as Main Street, Church Road and High Street. Main roads around Barry include the A4050 and A4055, which makes travel easy. We also cover the places around Barry: Gibbonsdown (1 mile north), Buttrills (1 mile west), Cadoxton (1 mile north-east), Barry Waterfront (1 mile south) and Merthyr Dyfan (1 mile north). We also work in nearby towns such as Penarth (4 miles north-east), Dinas Powys (3 miles north-east), Llantwit Major (9 miles west), Cowbridge (9 miles north-west), Llandough (4 miles north-east) and Lower Penarth (4 miles east). Being one of the Vale of Glamorgan’s larger places, Barry sees plenty of our work.

What’s near Barry

Our clients here include homes close to Whitmore High School, St. Helen's Church and Ysgol Gyfun Bro Morgannwg and the streets around them. Nearby too are The Tynewydd Inn (within half a mile north-west) and St Helen's Catholic Primary School (within half a mile east). The nearest railway station is Barry Docks station, roughly 0.5 miles south-east. A little further out are Barry Castle (1.4 miles south-west) and Barry Hospital (0.7 miles west). Not far away are The Knap Lake and Barry Island.

Map of Barry © OpenStreetMap contributors

For landlords and businesses

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

What a repair cannot fix

Before booking, it’s worth knowing the limits too:

  • A whole bath that’s dull or worn, where a full re-enamel is the better fix
  • Water coming from the waste or taps rather than the bath
  • Cracks in acrylic we cannot reach from underneath

Send us photos and we will tell you honestly before booking.

Materials we work on in Barry

  • Whirlpool & spa baths
  • Pressed steel enamel
  • Acrylic
  • Roll-top & freestanding
  • Cast iron enamel

Should you replace it?

Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and replacing like for like isn’t cheap. Repairing it leaves it where it is. Prices start from £95. The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so you know the cost before you book.

What you get with us

  • We come to you, anywhere in the UK
  • One visit for most repairs
  • A fixed quote before booking
  • No extra charge for your area

See our prices page or guide to resurfacing and replacement costs.

What affects the price in Barry

Prices start from £95. A fixed quote means you know the cost before booking. We look at:

  • Doing more than one item at once
  • The colour and finish to match
  • Any earlier repairs that need removing first
  • How much damage there is

No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Send photos for a quote

We price nearly every job from pictures. This is what we need:

  • Any earlier repairs or coatings
  • Daylight if possible, and no flash reflection
  • One picture of the whole bath
  • A coin beside the damage so we can judge size

The quickest way to a price is to send a couple of pictures through our quote form or call us. We will say immediately if a repair is the right fix.

Materials and what they mean for the repair

Cast iron

Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.

Composite and resin

Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.

Do you need bath repair in Barry?

A cracked acrylic bath normally wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the bath move until the acrylic gives way.

Typical reasons for a call-out include:

  • Rust spots around the plughole
  • Cracks in an acrylic bath
  • Chips along the edge of the bath
  • Snagging damage from a refit

Questions to ask before you book

  • What prep work is covered
  • Whether the price is fixed and includes VAT
  • If travel is included in the price
  • How changes to the job are handled

10 questions to ask before booking

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.