Cornwall · England
Bath Repair in Bealbury
Chip and crack repairs to enamel, acrylic and cast iron baths in Bealbury, carried out at your home and guaranteed for a year.
- Repairs from £95
- A chipped rim or side
- Damage beneath the taps
About our bath repair in Bealbury
You don’t need a new bath because of a chip. Our technicians fill, shape and refinish the damage, with the colour mixed on site so the repair is hard to spot. We regularly repair roll-top & freestanding, cast iron enamel and acrylic, and the jobs we see most are damage beneath the taps and a failed DIY repair that’s discoloured or lifting.
All of our repairs are guaranteed for twelve months in Bealbury and everywhere else. We return to put right any problem with the work.
- Area
- Bealbury (PL12)
- Area hub
- Cornwall
- Cover
- A year, on every repair
- Price
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
FAQs for Bealbury
Can landlords book you?
Yes, often. We can quote for several properties together and work between tenancies.
Can you repair a failed DIY repair?
Yes, we do this frequently. We strip it out, deal with any rust and repair it again.
Can you fix rust around the plughole?
Yes, very frequently. We take it back to sound metal, seal it, fill it and match the colour.
Can you match an avocado or pink bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
Can you repair a crack in an acrylic bath?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Will the repair show?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath, and we will tell you what to expect.
Can you repair something that’s been repaired before?
In most cases. We remove the old repair before doing a new one, so mention it when you send pictures.
When can you do it?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Repairing versus replacing in Bealbury
Swapping a damaged bath for a new one normally involves a plumber, lifting out the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it fixes just the damaged area in a single visit. Repairs from £95, with every job priced individually. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
Why choose Surface Doctor in Bealbury
- A year’s guarantee on all work
- We will tell you if it’s not worth repairing
- Fixed prices from your photos
- Colours mixed by hand to suit your surface
Take a look at our prices page or guide to resurfacing and replacement costs.
How the visit works
You don’t need to empty the room. Everything we use comes in the van with us, put protection down and start once you’re happy with the plan. Most jobs take a morning or an afternoon, and you are welcome to carry on with your day while we work.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can typically use the bath the day after.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Make sure the area is dry
- Keep children and pets away from the room on the day
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Related advice
Work for landlords and builders
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
More services for Bealbury
What a repair can’t fix
We won’t take on work that won’t last, so here’s what a repair can’t put right:
- Wear across the whole surface, which needs re-enamelling
- A bath that moves underfoot, until its support is fixed
- A steel bath rusted through
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Bealbury
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
Signs you need bath repair in Bealbury
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
Signs it’s time to call us include:
- Damage done while the bathroom was being fitted
- Chips along the edge of the bath
- A chip where the taps sit
- Hairline or through cracks in acrylic
What your quote should include
- What prep work is covered
- A fixed quote, and whether VAT is included
- How long it needs to cure
- What aftercare is recommended
Looking after it afterwards
Most damage we see is avoidable. A few tips:
- Fix dripping taps early to stop staining and limescale
- Use a soft cloth and washing-up liquid for everyday cleaning
- Make sure an acrylic bath is firm underfoot
- Rinse it down after each bath
Give the repair the full curing time we recommend before running a bath. After that, gentle cleaning keeps it looking good.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
Where we work around Bealbury
Bealbury is about 5 miles north-west of Saltash, in Cornwall. From the centre of Bealbury to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Bealbury is one of 644 places in Cornwall where we work.
Jobs in PL12 are booked in the same way as anywhere else. Whether you live on Dunstan Lane, Lake View and Keason Hill or anywhere nearby, we can come to you. We also cover the places around Bealbury: St Dominick (2 miles north-east), Cross (2 miles north-east), Hatt (3 miles south-east), Landrake (3 miles south) and Trematon (4 miles south). Larger places within reach include Stonehouse (9 miles south-east), Saltash (5 miles south-east), Liskeard (8 miles west), Launceston (12 miles north), Addington (7 miles west) and Looe (11 miles south-west).
Around Bealbury
Our clients here include homes close to Church of St Mellanus, St Mellion CofE VA School and Coryton Arms Excluding Extension On Left Hand Gable End. The nearest railway station is Calstock station, roughly 4.1 miles north-east. Further afield, we also cover the area around Cotehele Mill (2.9 miles north-east) and Pentillie (2.3 miles east). The countryside around Bealbury includes Kit Hill.
About our accreditations · Every repair comes with a one-year guarantee.
