Cornwall · England
Bath Re-enamelling in Bealbury
Full bath re-enamelling and resurfacing for homes and businesses in Bealbury and across Cornwall. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Lots of chips and rust spots
- Enamel that is lost its shine and feels rough
Bath re-enamelling in Bealbury, done in place
We re-enamel plenty of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. If you are dealing with several chips and rust patches and brown or grey marks that don’t clean off, we can help, whatever the material.
Whatever the size of the job, you get the same one-year guarantee in Bealbury and across Cornwall.
- Where
- Bealbury (PL12)
- County
- Cornwall
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Landlords, agents and businesses in Bealbury
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
For anyone letting property in or around Bealbury, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
When a repair is not the answer
We will always be straight with you, so here’s what a repair will not do:
- Leaking taps or wastes (a plumber’s job)
- A metal bath with a through crack
- A bath that’s rusted through
Not sure? Send pictures and we’ll give you a straight answer before you book.
Surfaces we repair
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
The process
We work cleanly and quietly, so you can carry on at home. We protect the area first, then the work takes a full day. At the end we talk you through the curing time and the aftercare.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Keep children and pets away from the room on the day
- Make sure the area is dry
- Let us know if it has been repaired before
How to get a price
Upload pictures of the damage and one of the whole item, with your PL12 postcode, and we will come back with a fixed quote.
Read more
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- A quick wipe after use keeps limescale away
- Don’t leave a chip unrepaired
- Repair dripping taps early
- Don’t let dyes or oils sit on the finish
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Prices and what affects them
Prices start from £350. We don’t charge extra for travel to Bealbury. The price depends on:
- The colour and finish to match
- Previous DIY repairs that have to come out
- How much damage there is
- Whether we combine several jobs
A repair is priced on what needs doing, not where you live. You’ll see the full price before booking, with nothing added on the day.
How to get a fixed price
Good pictures mean an accurate price. Here’s what helps:
- Whether it’s been repaired or coated before
- Any details about the material
- A close-up of the damage, in focus
- One picture of the entire bath
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and you are under no obligation.
What else we do in Bealbury
Repairing versus replacing in Bealbury
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Why choose Surface Doctor in Bealbury
- Honest advice, even when it means no job
- A fixed quote before you book
- No need to remove anything
- Technicians who travel to you, UK-wide
Take a look at our prices page and resurfacing vs replacement cost guide.
Common problems we fix in Bealbury
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Keep an eye out for these signs:
- A coating lifting around the plughole
- Stains that will not shift
- Thin, worn enamel in places
- An original cast iron bath that needs restoring
What to look for in a quote
- How the colour is matched
- When it can be used again
- Whether the price is fixed and includes VAT
- What happens if they find more damage
Our work in Bealbury
Bealbury is about 5 miles north-west of Saltash, in Cornwall. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Bealbury is one of 644 places in Cornwall where we work.
Postcode districts we cover here: PL12. Local streets include Dunstan Lane, Lake View and Keason Hill, and we cover them all. Close by, we cover St Dominick (2 miles north-east), Cross (2 miles north-east), Hatt (3 miles south-east), Landrake (3 miles south) and Trematon (4 miles south). Larger places within reach include Stonehouse (9 miles south-east), Saltash (5 miles south-east), Liskeard (8 miles west), Launceston (12 miles north), Addington (7 miles west) and Looe (11 miles south-west).
Local landmarks in Bealbury
Typical jobs here are in homes near Church of St Mellanus, St Mellion CofE VA School and Coryton Arms Excluding Extension On Left Hand Gable End and the streets around them. The closest station to Bealbury is Calstock station, roughly 4.1 miles north-east of the centre. Well-known places in the area include Cotehele Mill (2.9 miles north-east) and Pentillie (2.3 miles east). The countryside around Bealbury includes Kit Hill.
Common questions in Bealbury
How much does bath re-enamelling cost in Bealbury?
Prices start from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
How do I book?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
Do you work in Bealbury?
Yes. We cover the whole UK and come to Bealbury. Send pictures and we will quote, or call 0345 017 0787.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
About our accreditations · Every repair comes with a one-year guarantee.
