Staffordshire · England
Bath Repair for Beamhurst homes
Fixed-price bath repair in Beamhurst and the surrounding area, done in a single visit in most cases.
- Repairs from £95
- Cracks in an acrylic bath
- Impact holes in acrylic
Bath repair at your home in Beamhurst
Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. Nothing is unplumbed, the tiles are not touched, and the finish is matched to the rest of the bath. We regularly repair roll-top & freestanding, pressed steel enamel and acrylic, and the jobs we see most are chips along the edge of the bath and damage done while the bathroom was being fitted.
All our work is covered by a one-year guarantee, wherever you are in Staffordshire.
- Where
- Beamhurst (ST14)
- Area hub
- Staffordshire
- Warranty
- A year, on every repair
- Price
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, in much the same way.
Also near Beamhurst
What else we do in Beamhurst
Honest limits
To be straight with you, there are a few things a repair will not fix:
- Cracks in acrylic we can’t reach from underneath
- A bath worn all over, where resurfacing makes more sense
- A bath that moves underfoot, until its support is fixed
Not sure? Send pictures and we will give you a straight answer.
Materials we repair
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
Looking after it afterwards
Aftercare is simple:
- Give the bath a quick rinse after use
- Use a soft cloth and washing-up liquid for everyday cleaning
- Avoid scourers, wire wool and gritty cream cleaners
- Store metal items away from the bath
Look after the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Take it off before we arrive.
What affects the price in Beamhurst
Prices start from £95. You won’t pay by the hour. The price depends on:
- The colour and finish to match
- The type of damage
- Where the damage is and how we get to it
- How many items we do on one visit
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from photos
You can generally get a fixed price without us visiting. To make it quick:
- A clear, close picture of the problem area
- Natural light rather than flash
- A wider photo showing the whole bath
- Any details about the material
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Repair or replace: which is better?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Our bath repair starts from £95. What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so you know the cost before booking.
Why Beamhurst customers choose us
- Colours mixed by hand to suit your surface
- A fixed quote before booking
- Everything repaired in place
- We leave the room as we found it
See our pricing and bath cost comparison.
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
Our work in Beamhurst
Beamhurst is about 2 miles north-west of Uttoxeter, in Staffordshire. Wherever you are in the ST14 postcode area, a technician comes to you. Beamhurst is one of 512 towns and villages in Staffordshire where we work. Our nearest city page is Birmingham, about 31 miles away.
Our visits in ST14 are booked in the same way as anywhere else. Nearby, we also work in Fole (1 mile north-west), Withington (2 miles west), Hollington (2 miles north), Church Leigh (2 miles west) and Checkley (2 miles north-west). Further out, we also cover Stafford (12 miles south-west), Newcastle-under-Lyme (15 miles north-west), Burton upon Trent (14 miles south-east), Longton (10 miles north-west), Rugeley (12 miles south) and Stone (10 miles west).
Around Beamhurst
Our clients here include homes close to Oldfields Hall Middle School, among other places. For rail, the closest station is Uttoxeter station, about 3 miles south-east. Other landmarks nearby include Redfern's Cottage (2.6 miles south-east) and Alton Castle (3.9 miles north).
The process
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which normally takes a few hours, depending on the damage. If anything looks different from your pictures, we’ll talk to you before going ahead.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Let us know about parking or access
- Ensure the room can be ventilated
- Clear the area around the damage
How to get a price
To get a price, send two or three photos using our quote form or call us. We’ll say straight away whether it can be repaired.
Read more
Beamhurst: your questions answered
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do you work in Beamhurst?
Yes. We work across the UK and travel to Beamhurst and the rest of Staffordshire. Send photos and we will quote, or call 0345 017 0787.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
What does bath repair cost?
Prices start from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders across Staffordshire.
Something went through my bath. Can it be fixed?
In most cases. Send us a photo of the hole and one from under the bath if you can.
Can you repair something that is been repaired before?
Usually, yes. The old repair comes out first.
Will there be a smell?
Some materials have a smell while they’re applied. It fades as everything cures.
Do you need bath repair in Beamhurst?
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
Typical reasons for a call-out include:
- Chips along the edge of the bath
- Cracks in an acrylic bath
- A chip where the taps sit
- Snagging damage from a refit
Before you book anyone
- Whether the price covers travel
- How long it needs to cure
- Whether the colour is mixed to match
- A fixed quote, and whether VAT is included
About our accreditations · Every repair comes with a one-year guarantee.
