Warwickshire · England
Bath Repair for Bearley Cross homes
Chip and crack repairs to enamel, acrylic and cast iron baths in Bearley Cross, carried out at your home and guaranteed for a year.
- Repairs from £95
- Rusty patches near the plughole
- Holes from dropped items
Bearley Cross: your questions answered
Can you redo an old repair?
Yes. We remove the old filler and start again. Tell us about it when you send photos.
Something went through my bath. Can it be fixed?
Normally, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
What happens after I send pictures?
We look at the photos and reply with a fixed quote and some dates. If we need another angle, we will ask.
What does bath repair cost?
Repairs from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Do you cover Bearley Cross?
Yes. We work across the UK and come to Bearley Cross and the rest of Warwickshire. Send us photos for a fixed quote, or call 0345 017 0787.
Bath repair in Bearley Cross, done in place
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. There is no plumbing to disconnect, the tiles aren’t touched, and the finish is matched to the rest of the bath. Typical jobs include a kit repair that didn’t last and hairline or through cracks in acrylic, on whirlpool & spa baths, roll-top & freestanding and cast iron enamel.
Big or small, it’s backed by a one-year guarantee.
- Where
- Bearley Cross (B95)
- Area hub
- Warwickshire
- Guarantee
- A year, on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What we do, step by step
Here’s how a visit normally runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Plan for two to three hours for most chips from start to finish. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, typically the next day.
Before we arrive
- Have somewhere for us to park nearby if possible
- Mention if the room is upstairs or in a flat
- Have a window or extractor fan available
Ask for a price
To get a price, send two or three photos through our quote form or call us. We will say immediately if a repair is the right fix.
Read more
What bath repair costs
Prices start from £95. Quotes are free and the price is fixed. What we take into account:
- Previous DIY repairs that have to come out
- How easy the damage is to reach
- Doing more than one item at once
- Unusual colours or finishes
Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Quotes from your pictures
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- A coin or ruler next to the damage for scale
- One picture of the whole bath
- What it’s made of, if you know
- The postcode, so we can plan the visit
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and no obligation.
Honest limits
Not everything can be repaired, and we’d rather say so up front. We cannot fix:
- A bath that moves underfoot, until its support is fixed
- Leaking fittings, which need a plumber
- A bath worn all over, where resurfacing makes more sense
Not sure? Send photos and we’ll give you a straight answer before you book.
What we work on
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so early repairs matter.
When to call us in Bearley Cross
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
People usually call us after spotting one of these:
- Holes from dropped items
- Damage done while the bathroom was being fitted
- A chipped rim or side
- Rust spots around the plughole
Before you book anyone
- How changes to the job are handled
- How soon you can use it again
- What the guarantee covers, and for how long
- Whether there are any call-out or travel charges
Bearley Cross and nearby
Bearley Cross is about 4 miles north-west of Stratford-upon-Avon, in Warwickshire. Jobs in Bearley Cross are booked in like any other job: a fixed price from your pictures, then a visit to do the work. Bearley Cross is one of 324 towns and villages in Warwickshire we cover. Our nearest city page is Birmingham, about 17 miles away.
Every address in B95 is covered. If you are just outside Bearley Cross, we cover Newnham (1 mile south-west), Bearley (1 mile east), Pathlow (2 miles south), Wilmcote (2 miles south) and Wootton Wawen (2 miles north-west). Further out, we also cover Warwick (8 miles east), Royal Leamington Spa (10 miles east), Stratford-upon-Avon (4 miles south-east), Leamington Spa (10 miles east), Kenilworth (10 miles north-east) and Southam (15 miles east).
Landmarks near Bearley Cross
Our customers here include homes close to Church of St Mary, among other places. There is a railway station in Bearley Cross itself: Bearley station. A little further out are Stratford Hospital (3.9 miles south-east) and Aston Cantlow (2.1 miles west). For a walk, there is Henley Sidings.
For landlords and businesses
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will handle the rest.
DIY kit or professional repair?
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
Nearby places to Bearley Cross
More services for Bearley Cross
Repair or replace in Bearley Cross?
Swapping a damaged bath for a new one typically means a plumber, lifting out the old bath, making good the tiles and panel and disposing of the old one. Repairing it fixes just the damaged area in one visit. Our bath repair starts from £95. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why choose Surface Doctor in Bearley Cross
- We come to you, anywhere in the UK
- A fixed quote before you book
- Colour mixed on the day to match
- Straight answers about what a repair can do
Take a look at our pricing and guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
