Warwickshire · England
Bath Repair for Wilmcote homes
Damaged bath in Wilmcote? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- A cracked acrylic bath
- Rust spots around the plughole
Why repair rather than replace?
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. We charge the same wherever you are, so there’s no premium for Wilmcote. The job itself decides the price: how much damage, what it’s made of and how many items.
Why Wilmcote clients choose us
- No need to remove anything
- CHAS and Constructionline accredited
- One-year guarantee on every repair
- One price list for the entire UK
Read our prices page and bath cost comparison.
How we handle bath repair in Wilmcote
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in one visit. We are frequently asked to fix holes from dropped items and rusty patches near the plughole, in roll-top & freestanding, pressed steel enamel and whirlpool & spa baths.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Area
- Wilmcote (CV37)
- Region
- Warwickshire
- Guarantee
- A year, on every repair
- Quote
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
For landlords and businesses
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will arrange it.
Your questions about bath repair in Wilmcote
Do the materials smell?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
What if the damage is worse than the photos show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
How much does bath repair cost in Wilmcote?
Repairs from £95. Every job gets a fixed quote based on photos of the damage. Send a close-up and a picture of the whole item with your CV37 postcode.
Something went through my bath. Can it be fixed?
Frequently, if there’s access underneath. We back the hole, fill it and refinish the surface.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
I tried a repair kit. Can you fix it?
Yes. We remove the old filler and start again. Tell us about it when you send pictures.
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
About Wilmcote
Wilmcote is about 3 miles north-west of Stratford-upon-Avon, in Warwickshire. Book a date that suits you, and you’ll know when to expect us, so there is no waiting around. Wilmcote is one of 324 towns and villages in Warwickshire where we work. Our jobs stretch from Wilmcote to Birmingham (about 18 miles away).
We cover every part of CV37. You will find streets such as Station Road, Church Road and Masons Close. We also cover the places around Wilmcote: Pathlow (1 mile east), Newnham (1 mile north), Bishopton (1 mile south-east), Aston Cantlow (2 miles north-west) and Bearley Cross (2 miles north). We also work in nearby towns such as Warwick (9 miles north-east), Royal Leamington Spa (11 miles north-east), Stratford-upon-Avon (3 miles south-east), Leamington Spa (11 miles north-east), Kenilworth (12 miles north-east) and Alcester (5 miles west).
Landmarks near Wilmcote
Around Wilmcote, we work in homes near The Mason's Arms Public House, Church of St Andrew and Wilmcote CofE (Voluntary Aided) Primary School, among other places. There is a railway station in Wilmcote itself: Wilmcote station. Other landmarks nearby include Old Red Lion Shopping Centre (3.2 miles south-east) and Old Stratford and Drayton (1.5 miles south-east). Open spaces near Wilmcote include River Arrow Nature Reserve.
Towns and villages near Wilmcote
Also in Wilmcote
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
How we price bath repair
Repairs from £95. A fixed quote means you know the cost before you book. We take into account:
- Any earlier repairs that need removing first
- The type of damage
- How many areas need work
- How hard the colour is to match
A repair is priced on what needs doing, not your postcode. The full price is agreed before booking.
Send photos for a quote
You can usually get a fixed quote without us visiting. To make it quick:
- Details of any past repairs
- A wider photo showing the entire bath
- A coin or ruler next to the damage for scale
- Good light, ideally daylight, without flash glare
To get a price, send a couple of pictures through our quote form or call us. We will tell you honestly whether it can be repaired.
What we do, step by step
A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and tidy away. Allow a few hours, depending on the damage from start to finish. Before leaving, we tell you when it can be used and how to care for it.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Have a window or extractor fan available
- Let us know which floor the room is on
- Ensure the area is dry
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price.
Related advice
What we are called out for in Wilmcote
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, often before anyone notices. We repair snagging damage like this regularly.
These are the problems we are asked about most:
- A cracked acrylic bath
- Damage done while the bathroom was being fitted
- A kit repair that didn’t last
- Chips under the taps
Questions to ask before booking
- How the room is protected while they work
- The length of the guarantee and what it covers
- What happens if they find more damage
- Whether a trained technician does the job
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- Fix dripping taps early to stop staining and limescale
- Ensure an acrylic bath is firm underfoot
- Rinse the bath after use, especially in hard water areas
- Protect the bath with a towel when doing jobs nearby
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Remove it before the repair.
About our accreditations · Every repair comes with a one-year guarantee.
