Warwickshire · England
Bath Repair in Beausale
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Beausale, with a one-year guarantee on every repair.
- Repairs from £95
- A failed DIY repair that is discoloured or lifting
- A hole punched through by something heavy
Why repair rather than replace?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. A repair keeps it in place. Prices start from £95. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access.
Why book with us
- Work done at your home or business
- We will tell you if it’s not worth repairing
- Accredited with CHAS, Constructionline and SafeContractor
- One-year guarantee on every repair
See our pricing and resurfacing vs replacement cost guide.
Bath repair in Beausale without replacing anything
A typical bath repair is a few hours’ work, and you can normally bathe again the next day. You won’t need a plumber or tiler, because the bath does not move. Common call-outs are for deep scratches in acrylic and rusty patches near the plughole, in whirlpool & spa baths, acrylic and pressed steel enamel.
Whatever the size of the job, you get the same one-year guarantee.
- Location
- Beausale (CV35)
- County
- Warwickshire
- Guarantee
- 12 months on all our work
- Quote
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Beausale
More services for Beausale
Common questions in Beausale
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day.
It’s been repaired before. Can you still fix it?
Generally, yes. Tell us what was done before and we will plan for it.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
When can I have a bath again?
Most baths can be used the following day. We confirm the time before we leave.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is there a guarantee?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
What affects the price in Beausale
Prices start from £95. We price every job individually. The main factors are:
- Any earlier repairs that need removing first
- The colour and finish to match
- The material
- How many items we do on one visit
A repair is priced on what needs doing, not your postcode. The full price is agreed before you book.
Getting a price from pictures
A couple of clear pictures is all it takes. It helps if you send:
- Any earlier repairs or coatings
- Any details about the material
- One sharp close-up of the damage
- Good light, ideally daylight, without flash glare
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
When we’d advise against a repair
A repair isn’t right for every job, including:
- A steel bath rusted through
- A bath worn all over, where resurfacing makes more sense
- Cracks in acrylic we can’t reach from underneath
If in doubt, send photos and we’ll say what we think before booking.
Materials we repair
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
What we do, step by step
Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and the work begins. You can expect it to take a morning or an afternoon, and we will keep you posted as we go.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Make sure the room can be ventilated
- Keep children and pets away from the room on the day
- Mention any parking restrictions or tricky access
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. You will get a fixed quote, not an estimate.
Read more
Beausale and the surrounding area
Beausale is about 3 miles west of Kenilworth, in Warwickshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Beausale is one of 324 towns and villages in Warwickshire we cover. Our jobs stretch from Beausale to Birmingham (about 14 miles away).
All of CV35 is covered. Jobs here include addresses on Church Road, Honiley Road and Dirty Lane and the roads around them. If you’re just outside Beausale, we cover Haseley Knob (1 mile west), Haseley Green (1 mile south-west), Honiley (1 mile north), Wroxall (1 mile north-west) and Five Ways (1 mile south-west). Within a short drive, we also cover Nuneaton (15 miles north-east), Warwick (5 miles south-east), Royal Leamington Spa (6 miles south-east), Stratford-upon-Avon (10 miles south), Bedworth (12 miles north-east) and Leamington Spa (6 miles south-east).
What’s near Beausale
Locally, our jobs take us to homes close to Church of St John the Baptist, among other places. The closest station to Beausale is Hatton station, about 3 miles south of the centre. A little further out are Baddesley Clinton (2.7 miles west) and St Michael's Hospital (3.9 miles south-east). For a walk, there is Oxpen Meadow Lake.
For landlords and businesses
Landlords, letting agents and housing providers in Beausale use us as well as householders. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Keeping it looking good
Aftercare is simple, and it makes a real difference:
- Rinse it down after each bath
- Get any new chip repaired before it rusts
- Put a towel in the bath if you are working above it
- Do not scrub with anything abrasive
Keep metal objects like razors and cans off the surface, as they can leave rust marks. And fix dripping taps promptly.
Tape over a fresh chip or crack until it’s repaired, so water can’t get in. Remove it before the repair.
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
About our accreditations · Every repair comes with a one-year guarantee.
