Gwynedd · Wales
Bath Repair in Beddgelert
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Beddgelert and across Gwynedd. Send pictures for a free, fixed quote.
- Repairs from £95
- Deep scratches in acrylic
- Snagging damage from a refit
Prices and what affects them
Prices start from £95. Each job gets its own fixed quote. These are the things that affect it:
- Doing more than one item at once
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
- What the surface is made of
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Quotes from your pictures
A couple of clear pictures is all it takes. It helps if you send:
- Whether it’s been repaired or coated before
- A close-up of the damage, in focus
- One picture of the whole bath
- Daylight if possible, and no flash reflection
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote without visiting.
Bath repair in Beddgelert, done in place
A typical bath repair is a few hours’ work, and the bath is back in use the day after. You will not need a plumber or tiler, because the bath does not move. Common call-outs are for rusty patches near the plughole and holes from dropped items, in whirlpool & spa baths, acrylic and roll-top & freestanding.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Location
- Beddgelert (LL55)
- County
- Gwynedd
- Warranty
- A year, on every repair
- Price
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
For landlords and businesses
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
When to call us in Beddgelert
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: the bath isn’t properly supported, so it flexes under weight.
You may need us if you’ve spotted:
- Rust spots around the plughole
- Chips caused by builders
- A kit repair that didn’t last
- A cracked acrylic bath
What to look for in a quote
- Is the price fixed, and does it include VAT?
- How long it needs to cure
- How the colour is matched
- What preparation is included
What happens on the day
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a few hours, depending on the damage. We tidy up before we leave and let you know when you can use it again.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Keep children and pets away from the room on the day
- Move bottles, mats and clutter away from the area
Get a quote
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Related advice
DIY repairs versus a professional job
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Materials and what they mean for the repair
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.
About Beddgelert
Beddgelert is about 15 miles south of Bangor, in Gwynedd. Book a date that suits you, and you will know when to expect us, so you’re not left waiting in all day. Beddgelert is one of 165 towns and villages in Gwynedd we cover. You can also see our page for Liverpool, about 56 miles away.
Here we cover the LL55 postcode area. From Stryd Smith, Stryd yr Eglwys and Stryd Gwynant or anywhere nearby, a technician can come to you. We also travel to Garreg (4 miles south-east), Llanfrothen (5 miles south-east), Tremadog (5 miles south), Penmorfa (5 miles south-west) and Penrhyndeudraeth (6 miles south). We also work in nearby towns such as Bangor (15 miles north), Caernarfon (11 miles north-west), Bethesda (12 miles north), Hirael (15 miles north), Upper Bangor (15 miles north) and Glanadda (14 miles north).
Around Beddgelert
Our customers here include homes close to Tanronnen Inn and Priory and Parish Church of Saint Mary, among other places. Nearby you will also find T H Parry-Williams Museum (3.2 miles north-west) and Ysbyty Alltwen (5.3 miles south). The countryside around Beddgelert includes Llyn Dinas and Craig y Llan.
Places near Beddgelert
What else we do in Beddgelert
FAQs for Beddgelert
What information do you need?
Use the quote form or ring 0345 017 0787, and we will take it from there.
Do you come to Beddgelert?
Yes. We work across the UK and come to Beddgelert. Send us photos for a fixed quote, or call 0345 017 0787.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before.
Is there any odour?
There can be some smell while we work, so we ventilate the room. It fades as everything cures.
Can I add another job to the visit?
Of course, and it typically saves money. Send pictures of everything together and we’ll quote them together.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day.
Honest limits
A few problems are outside what a surface repair can do:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Flexing caused by a failed cradle or loose feet
- Cracks in acrylic we can’t reach from underneath
Not sure? Send photos and we will give you a straight answer before booking.
Surfaces we repair
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
How to look after the repair
Simple care helps the repair last. We recommend:
- Keep abrasive pads and gritty cleaners away from the bath
- Get any new chip repaired before it rusts
- Get a dripping tap fixed promptly
- Keep metal cans and razors off the surface
Give the repair the full curing time we recommend before using the bath. After that, gentle cleaning keeps it looking good.
Stop using the bath if a crack lets water through. Water under the bath can damage the floor and the ceiling below.
About our accreditations · Every repair comes with a one-year guarantee.
