County Durham · England
Bath chip & crack repair in Belmont, County Durham
Problem with your bath in Belmont? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Holes from dropped items
- Hairline or through cracks in acrylic
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
How we handle bath repair in Belmont
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. We regularly repair roll-top & freestanding, pressed steel enamel and whirlpool & spa baths, and the jobs we see most are rust spots around the plughole and holes from dropped items.
Every repair is covered by a one-year guarantee, wherever you are in County Durham.
- Where
- Belmont (DH1, DH99, DH7)
- County
- County Durham
- Guarantee
- One year on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
For landlords and businesses
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
What we do, step by step
We work cleanly and quietly, so you can carry on at home. We protect the area first, then the work takes a few hours, depending on the damage. At the end we talk you through the curing time and the aftercare.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
Before we arrive
- Mention any parking restrictions or tricky access
- Tell us if there are stairs or a lift
- Make sure the room can be ventilated
Get a quote
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Advice
Belmont: your questions answered
Is my repair covered?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Will the repair show?
We aim for a repair you cannot easily find. The rest of the bath’s condition makes a difference.
What information do you need?
Just photos, your postcode and a contact number. On the day, access to the room.
How long does the repair take to cure?
Normally within a day, though it depends on what we’ve done.
What happens next?
We check the damage, the material and your postcode, then reply with a quote with dates.
Will the price change on the day?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Do the materials smell?
Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.
Can you match an avocado or pink bath?
Yes. We mix the colour on the day to match, including older coloured suites.
Prices and what affects them
Repairs from £95. There’s no area surcharge for Belmont. What changes the price is:
- What the surface is made of
- How hard the colour is to match
- Access to the area
- What kind of damage it is
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Getting a price from pictures
Before you send photos, a few simple things make all the difference:
- Where you are, by postcode
- A clear, close picture of the problem area
- One picture of the entire bath
- Daylight if possible, and no flash reflection
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
How to care for the repair
A little care keeps the finish looking good. Our advice:
- Don’t leave a fresh chip for long
- Use a soft cloth and washing-up liquid for everyday cleaning
- Rinse the bath after use, especially in hard water areas
- Put a towel in the bath if you’re working above it
Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.
Stop using the bath if a crack lets water through until it’s repaired. Leaks under a bath can damage floors and ceilings.
When we’d advise against a repair
We won’t take on work that will not last, so here’s what a repair cannot put right:
- Metal that has corroded all the way through
- A bath worn all over, where resurfacing makes more sense
- Cracks in acrylic we can’t reach from underneath
If in doubt, send pictures and we’ll say what we think.
What we work on
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
Our work in Belmont
Belmont is about 2 miles east of Durham, in County Durham. Book a date that suits you, and you will know when to expect us, so there is no waiting around. Our technicians cover all 329 towns and villages in County Durham. Our jobs stretch from Belmont to Newcastle upon Tyne (about 15 miles away).
Our visits in DH1, DH99 and DH7 work the same way as everywhere else we cover. Jobs here include addresses on High Street, Grange Road and Renny's Lane. You’ll find Belmont on the A1(M), which makes it straightforward to reach. We also cover the places around Belmont: Moor End (1 mile north), Carrville (1 mile north-east), Gilesgate (1 mile west), Old Durham (1 mile south-west) and Sherburn House (1 mile south). Larger places within reach include Consett (13 miles west), Newton Aycliffe (11 miles south), Bishop Auckland (11 miles south-west), Spennymoor (7 miles south-west), Seaham (8 miles north-east) and Chester-le-Street (5 miles north).
Around Belmont
Our clients here include homes close to Old Durham Gardens, Belmont Community School and Belmont CofE (Controlled) Primary School and the streets around them. The nearest railway station is Durham station, roughly 2 miles west of the centre. Well-known places in the area include Durham Museum (1.8 miles south-west) and The Gates Shopping Centre (1.9 miles west).
- Parks and local facilities nearby include Durham (2 miles west)
Why repair rather than replace?
For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it takes one visit, and the bathroom stays exactly as it is. Repairs from £95, with every job priced individually. Set against the cost of replacement, repairing generally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why Belmont clients choose us
- Repair technicians who travel to you, UK-wide
- Every repair guaranteed for a year
- Accredited with CHAS, Constructionline and SafeContractor
- Dust sheets down, tidy finish
See our pricing or bath cost comparison.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Also near Belmont
Other services in Belmont
About our accreditations · Every repair comes with a one-year guarantee.
