County Durham · England
Bath Repair for Gilesgate homes
Problem with your bath in Gilesgate? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Cracks in an acrylic bath
- Scuffs and scratches in the surface
Bath repair in Gilesgate, done in place
You don’t need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day. Typical jobs include rust spots around the plughole and snagging damage from a refit, in whirlpool & spa baths, cast iron enamel and acrylic.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Where
- Gilesgate (DH1)
- Area hub
- County Durham
- Cover
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Work for landlords and builders
If you manage property in Gilesgate, we can repair and quote for several addresses together. Send photos for each one and we’ll price them together.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
More services for Gilesgate
How to look after the repair
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Have new chips seen to early
- Keep abrasive pads and gritty cleaners away from the bath
- Put a towel in the bath if you’re working above it
- Use a soft cloth and washing-up liquid for everyday cleaning
Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.
What affects the price in Gilesgate
Prices start from £95. A fixed quote means you know the cost before booking. We look at:
- The material
- The type of damage
- Where the damage is and how we get to it
- The size and number of damaged areas
We charge the same wherever you are, with no extra for Gilesgate. The job itself decides the price: the material, the amount of damage and how many items.
Send photos for a quote
We price nearly every job from pictures. This is what to send:
- What it’s made of, if you know
- A wider photo showing the whole bath
- Your postcode, so we can check dates
- Something in shot to show the size
You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
When we would advise against a repair
In fairness, there are a few things a repair won’t fix:
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Leaking fittings, which need a plumber
- Cracks in acrylic we can’t reach from underneath
Not sure? Send pictures and we will give you a straight answer before you book.
What we work on
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
Gilesgate: your questions answered
Do you cover Gilesgate?
Yes. We work across the UK and come to Gilesgate. Send photos and we will quote, or call 0345 017 0787.
Do the materials smell?
There may be a mild smell during the work that clears as it cures.
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Is my repair covered?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How much does bath repair cost in Gilesgate?
Repairs from £95. Every job gets a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.
Can you repair a hole in a bath?
Normally. Photos of the hole and the underside help us check.
When can you do it?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it fails, we can still put it right.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Materials and what they mean for the repair
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
How the visit works
Arrival times are agreed in advance, so you are not left guessing. Once we are there, the work takes a few hours. We leave the room clean and you’ll know when it can be used.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- The repair is left to cure, and most baths can be used the day after.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Have a window or extractor fan available
- Keep a parking space free if you can
How to get a price
For a price in Gilesgate, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
Repair or replace: which is better?
Replacing a bath rarely stops at the bath: tiles along the rim generally crack when it comes out, a new panel is frequently needed, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Prices start from £95. A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why choose Surface Doctor in Gilesgate
- Work done at your home or business
- Normally one visit, start to finish
- One price list for the whole UK
- Honest advice, even when it means no job
Take a look at our full price list or guide to resurfacing and replacement costs.
Gilesgate and the surrounding area
Gilesgate is about 1 mile east of Durham, in County Durham. Across the DH1 area, we carry out the work at your property. We cover 329 places across County Durham, from the larger towns to small villages. Our nearest city page is Newcastle upon Tyne, about 15 miles away.
Jobs in DH1 work the same way as everywhere else we cover. We regularly work on streets such as Mill Lane, Green Lane and Oak Avenue and the roads around them. Gilesgate is on the A181 and A690, so it’s easy for us to reach. If you’re just outside Gilesgate, we cover Old Durham (1 mile south), Durham (1 mile west), Belmont (1 mile east), Moor End (1 mile north-east) and Elvet (1 mile south-west). Larger places within reach include Consett (13 miles north-west), Newton Aycliffe (11 miles south), Bishop Auckland (10 miles south-west), Spennymoor (6 miles south), Seaham (9 miles north-east) and Chester-le-Street (5 miles north).
Near you in Gilesgate
We visit homes around Durham Sixth Form Centre, Chorister School and Durham University Library and Collections, among other places. Other local landmarks include The Dun Cow Public House (0.7 miles south-west), St Giles Church (within half a mile south-west), Old Durham Gardens (0.7 miles south) and Durham Gilesgate Primary School (within half a mile north-east). The nearest railway station is Durham station, roughly 1.1 miles west. Well-known places in the area include Kepier Hospital (under half a mile west) and The Gates Shopping Centre (1 mile west).
- Parks and local facilities nearby include Durham (1.2 miles west)
About our accreditations · Every repair comes with a one-year guarantee.
