Derbyshire · England

Bath chip & crack repair in Heanor, Derbyshire

Local bath repair for Heanor: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Repairs from £95
  • An old repair that has yellowed or come loose
  • Rust by the waste and overflow
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Heanor

Common questions in Heanor

Will the repair last?

A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps.

What about rust by the waste?

Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.

Is a repair better than a new one?

Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.

Is it safe with children and pets around?

Keep pets and children away from the work area on the day.

What happens once I’ve sent photos?

We review the pictures and send a fixed quote.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Do you repair coloured baths?

Yes. We mix the colour on the day to match, including pastel and older colours.

How much does bath repair cost in Heanor?

Repairs from £95. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.

How we handle bath repair in Heanor

Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in one visit. We are frequently asked to fix damage beneath the taps and a chipped rim or side, on cast iron enamel, whirlpool & spa baths and pressed steel enamel.

A one-year guarantee comes as standard.

Rusty chip next to a bath plughole, before and after repair
Where
Heanor (DE75, NG16)
County
Derbyshire
Warranty
One year on every repair
Price
From £95. Fixed and free, based on photos
Phone
0345 017 0787
Last updated
23 October 2026

How it works

It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which generally takes a few hours, depending on the damage. If we find something your photos didn’t show, we’ll explain it before carrying on.

  1. We start by cleaning the damage and taking out loose enamel and rust.
  2. The chip or crack is filled, then sanded level with the bath.
  3. The colour is mixed on the spot to match your bath.
  4. We apply the finish coats and polish the repair so it blends in.
  5. The repair is left to cure, and most baths can be used the following day.

Preparing for the visit

  • Have a window or extractor fan available
  • Mention if the room is upstairs or in a flat
  • Clear toiletries, mats and anything else from around the area

Ask for a price

If you’re in Heanor and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Get a free quote

Related advice

Repairing versus replacing in Heanor

If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Repairs from £95, with every job priced individually. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

Why us?

  • Rooms protected and left tidy
  • Free fixed quotes from pictures
  • Straight answers about what a repair can do
  • CHAS and Constructionline accredited

See our pricing or bath cost comparison.

Heanor and the surrounding area

Heanor is about 8 miles north-west of Beeston, in Derbyshire. From the centre of Heanor to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in 532 places across Derbyshire, from the larger towns to small villages. You can also see our page for Birmingham, about 44 miles away.

All of DE75 and NG16 is within our area, from the main roads to the quietest streets. Jobs here include addresses on Market Place, Market Street and High Street and the roads around them. With the A608 and A610 close by, Heanor is simple for us to get to. Other places close to Heanor include Langley Mill (1 mile east), Aldercar (1 mile south-east), Loscoe (1 mile north-west), Woodlinkin (1 mile north) and Smalley (1 mile south-west). Larger places within reach include Ilkeston (3 miles south-east), Long Eaton (9 miles south), Belper (5 miles west), Ripley (3 miles north-west), Bolsover (15 miles north) and Matlock (12 miles north-west). Heanor is among the bigger towns we cover in Derbyshire.

Landmarks near Heanor

Our customers here include homes close to Butchers Arms, Marlpool Junior School and Church of St Lawrence, among other places. Heanor’s nearest station is Langley Mill station, roughly 0.8 miles east. Well-known places in the area include Mr Vacuum Cleaner Museum (under half a mile west) and Ilkeston Hospital (2.2 miles south-east).

Map of Heanor © OpenStreetMap contributors

For landlords and businesses

Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

Landlords, letting agents and housing providers in Heanor use us as well as householders. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.

How we price bath repair

Prices start from £95. You’ll know the full cost before you book. We look at:

  • What kind of damage it is
  • Access to the area
  • Previous DIY repairs that have to come out
  • How many areas need work

The price reflects the work involved, not where you live. The full price is agreed before you book.

Quotes from your pictures

We price nearly every job from pictures. This is what to send:

  • A coin or ruler next to the damage for scale
  • Details of any past repairs
  • One picture of the whole bath
  • What it’s made of, if you know

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.

DIY kit or professional repair?

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.

What we’re called out for in Heanor

Baths take more knocks than people expect: everyday items get dropped into it all the time, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.

You may need us if you’ve spotted any of these:

  • A cracked acrylic bath
  • Rusty patches near the plughole
  • An old repair that has yellowed or come loose
  • Damage beneath the taps

What your quote should include

  • What the guarantee covers, and for how long
  • Whether a trained technician does the job
  • If travel is included in the price
  • What aftercare is recommended

How to compare quotes

What your bath is made of matters

Acrylic

Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Composite and resin

Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.

Honest limits

Some problems need a builder, plumber or fitter rather than us:

  • Metal that has corroded all the way through
  • A bath worn all over, where resurfacing makes more sense
  • A bath that moves underfoot, until its support is fixed

Send us photos and we’ll tell you honestly.

Surfaces we repair

  • Pressed steel enamel
  • Acrylic
  • Whirlpool & spa baths
  • Cast iron enamel
  • Roll-top & freestanding
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.