Derbyshire · England
Bath chip & crack repair in Chevinside, Derbyshire
Local bath repair for Chevinside: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Chips on the rim or sides
- Rusty patches near the plughole
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Bath repair in Chevinside, done in place
A damaged bath does not have to mean a new bathroom. Our technicians fill, shape and refinish the damage, with the colour mixed on site so the repair is hard to spot. Our technicians work on whirlpool & spa baths, roll-top & freestanding and acrylic, and the jobs we see most are a kit repair that didn’t last and rust by the waste and overflow.
A one-year guarantee comes as standard.
- Location
- Chevinside (DE56)
- County
- Derbyshire
- Guarantee
- 12 months on all our work
- Price
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Chevinside
What else we do in Chevinside
Materials and what they mean for the repair
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
What we’re called out for in Chevinside
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
Customers normally contact us about:
- A failed DIY repair that is discoloured or lifting
- Scuffs and scratches in the surface
- A chip where the taps sit
- Chips along the edge of the bath
What your quote should include
- What preparation is included
- A fixed price, and whether VAT is included
- What aftercare is recommended
- Whether a trained technician does the job
Repair or replace: which is better?
People frequently assume a cracked or chipped bath has to come out. In most cases it does not: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Repairs from £95, with every job priced individually. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why us?
- No need to remove anything
- Every repair guaranteed for a year
- Dust sheets down, tidy finish
- CHAS, Constructionline and SafeContractor accredited
Take a look at our pricing or guide to resurfacing and replacement costs.
Chevinside questions
How much does bath repair cost in Chevinside?
Prices start from £95. We give a fixed quote from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Can I get a quote without a visit?
In nearly every case. If photos don’t show enough, we will ask for another angle.
Something went through my bath. Can it be fixed?
In most cases. Photos of the hole and the underside help us check.
Can you repair something that’s been repaired before?
Yes, we frequently do. Removing the old work can add time, and that is in the quote.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
What do you need from me?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Is a bath repair durable?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
Work for landlords and builders
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
How we price bath repair
Repairs from £95. We charge the same across the UK, including Chevinside. What changes the price is:
- The material and finish
- How much damage there is
- Doing more than one item at once
- Previous DIY repairs that have to come out
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Quotes from your photos
Good photos mean an accurate price. Here’s what helps:
- Whether it’s been repaired or coated before
- The material, if you know it
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
Email us a picture of the damage and a wider shot of the entire item, with your DE56 postcode, and we will reply with a fixed quote.
How it works
We begin by going over the job with you, so you know exactly what we are doing. After that, protection goes down around the work area and we start. Allow a morning or an afternoon, and we will keep you posted as we go.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, typically the next day.
Getting ready for the visit
- Have a window or extractor fan available
- Plan for the room to be out of bounds to pets and children
- Keep a parking space free if you can
Ask for a price
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Read more
Aftercare tips
Simple care helps the repair last. Our advice:
- If an acrylic bath flexes, have its feet adjusted
- Rinse the bath after use, especially in hard water areas
- Stick to mild cleaners and a soft cloth
- Avoid scourers, wire wool and gritty cream cleaners
Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
Covering Chevinside
Chevinside is about 1 mile south-west of Belper, in Derbyshire. We agree a date that works for you, and you’ll know when to expect us, so there is no waiting around. We cover all 532 towns and villages in Derbyshire, from the larger towns to small villages. Our jobs stretch from Chevinside to Birmingham (about 41 miles away).
We work across DE56 and the streets around it. Neighbouring places we cover include Milford (1 mile south), Belper (1 mile north-east), Bargate (1 mile east), Holbrook (2 miles south-east) and Cinderhill (2 miles east). Larger places within reach include Ilkeston (8 miles east), Long Eaton (12 miles south-east), Heanor (6 miles east), Ripley (4 miles north-east), Langley Mill (6 miles east) and Matlock (9 miles north).
What’s near Chevinside
In Chevinside, that means homes near Long Row Primary School, Belper School and Sixth Form Centre and Herbert Strutt School and the streets around them. Nearby too are St Swithun (within half a mile south-east) and The Old King's Head Public House (0.5 miles north-east). Chevinside’s nearest station is Belper station, roughly 0.5 miles north-east. Further afield, we also cover the area around Belper Urban District (1 mile north-east) and Babington Hospital (less than half a mile north-east). For a walk, there’s Alport Height and Wyver Lane Nature Reserve.
About our accreditations · Every repair comes with a one-year guarantee.
