Leicestershire · England
Bath chip & crack repair in Belton, Leicestershire
Bath repair for Belton, without a refit. Send us pictures for a fixed quote, then we come to you.
- Repairs from £95
- A cracked acrylic bath
- Impact holes in acrylic
About our bath repair in Belton
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. We regularly repair acrylic, pressed steel enamel and cast iron enamel, and the jobs we see most are a cracked acrylic bath and a chip where the taps sit.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Area
- Belton (LE12)
- Region
- Leicestershire
- Guarantee
- One year on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs in Leicestershire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Aftercare tips
So the finish stays in good condition for years:
- A dripping tap stains enamel, so fix it early
- Ensure an acrylic bath is firm underfoot
- Rinse the bath after use, especially in hard water areas
- Avoid scourers, wire wool and gritty cream cleaners
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath without abrasive products.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and water can get through to the floor below.
Different materials, different repairs
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
About Belton
Belton is about 2 miles north-west of Shepshed, in Leicestershire. Book a date that suits you, and you’ll know when to expect us, so there’s no waiting around. We work in 287 places in Leicestershire. Our jobs stretch from Belton to Birmingham (about 32 miles away).
Our visits in LE12 work the same way as everywhere else we cover. Streets in the area include Sandhills Close, Sadlers Wells and De Verdun Avenue, and we cover them all. Close by, we cover Osgathorpe (1 mile south-west), Thringstone (2 miles south-west), Griffydam (2 miles south-west), Worthington (2 miles west) and Peggs Green (3 miles south-west). We also work in nearby towns such as Loughborough (5 miles east), Coalville (4 miles south), Ashby-de-la-Zouch (6 miles west), Syston (13 miles south-east), Shelthorpe (6 miles east) and Earl Shilton (14 miles south).
Near you in Belton
Locally, our jobs take us to homes close to The George Public House, Belton Church of England Primary School and Hind Leys Community College, among other places. A little further out are East Midlands Aeropark (3.6 miles north) and Aston Hall Hospital (5.7 miles north). For a walk, there is Bardon Hill and Charnwood Lodge.
Signs you need bath repair in Belton
Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, a chip that reaches the metal will start to rust.
It’s worth getting a quote if you see:
- An old repair that has yellowed or come loose
- Chips under the taps
- A chipped rim or side
- Snagging damage from a refit
Before booking anyone
- What preparation is included
- How soon you can use it again
- How your room will be protected
- Whether a trained technician does the job
How the visit works
A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and clear up. Allow a few hours, depending on the damage from start to finish. Before we go, we’ll explain how long to leave it and how to look after it.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, typically the next day.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Mention if the room is upstairs or in a flat
- Keep a parking space free if you can
Ask for a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
Read more
Honest limits
A repair isn’t right for every job, including:
- Flexing caused by a failed cradle or loose feet
- Cracks in parts of an acrylic bath we can’t get to from below
- A steel bath rusted through
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Pressed steel enamel
Repair or replace: which is better?
People often assume a cracked or chipped bath has to come out. In most cases it does not: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Prices start from £95. Compared with replacing, a repair is generally a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why Belton clients choose us
- Fixed prices from your pictures
- No extra charge for your area
- One-year guarantee on every repair
- Most jobs done in one visit
Read our pricing or guide to resurfacing and replacement costs.
Common questions in Belton
Is a repair better than a new one?
Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Can you repair a hole in a bath?
Typically, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
Is there a guarantee?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
What about rust by the waste?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
How much does bath repair cost in Belton?
Prices start from £95. We give a fixed quote based on pictures of the damage. Send a close-up and a picture of the whole item and your postcode.
Is there a call-out fee?
We don’t add a call-out fee. The fixed quote covers the visit and the work.
What areas do you cover?
Across the UK. Our prices are the same everywhere.
Towns and villages near Belton
Also in Belton
What affects the price in Belton
Prices start from £95. There are no hourly rates or hidden extras. The price depends on:
- What kind of damage it is
- What the surface is made of
- Access to the area
- Whether we combine several jobs
We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from photos
A couple of clear pictures is all it takes. Try to include:
- A coin or ruler next to the damage for scale
- Any earlier repairs or coatings
- What it’s made of, if you know
- Your postcode, so we can check dates
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
About our accreditations · Every repair comes with a one-year guarantee.
