East Riding of Yorkshire · England
Bath Repair in Bennetland
Bath repair for Bennetland, without a refit. Send us pictures for a fixed price, then we come to you.
- Repairs from £95
- A cracked acrylic bath
- Rusty patches near the plughole
Bath repair at your home in Bennetland
We’ve repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. All of it is repaired where the bath stands with a one-year guarantee. Typical jobs include cracks in an acrylic bath and scratches you can feel with a fingernail, on pressed steel enamel, whirlpool & spa baths and roll-top & freestanding.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Bennetland (HU15, DN14)
- County
- East Riding of Yorkshire
- Guarantee
- 12 months on all our work
- Price
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Bennetland questions
Do you come to Bennetland?
Yes, we do. Repair technicians travel to Bennetland from across the region, with no extra charge for travel.
Is there any odour?
There may be a mild smell during the work, which fades afterwards.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Can you redo an old repair?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
Can you repair a crack in an acrylic bath?
Frequently, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a picture.
Are there extra charges for Bennetland?
No. Our quotes include travel, and we charge the same wherever you are.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Prices and what affects them
Repairs from £95. Prices are worked out job by job, from your pictures. What matters most is:
- Where the damage is and how we get to it
- The size and number of damaged areas
- How hard the colour is to match
- The material and finish
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
Getting a price from pictures
You can usually get a fixed price without us visiting. To make it quick:
- Your postcode, so we can check dates
- One sharp close-up of the damage
- Good light, ideally daylight, without flash glare
- Details of any past repairs
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. You’ll get a fixed quote, not an estimate.
What we’re called out for in Bennetland
Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, a chip that reaches the metal lets water in, and rust follows.
Signs it’s time to call us include:
- Chips on the rim or sides
- Scuffs and scratches in the surface
- Damage beneath the taps
- Impact holes in acrylic
Before you book anyone
- Is the price fixed, and does it include VAT?
- Whether the colour is mixed to match
- What prep work is covered
- Who turns up on the day
What happens on the day
On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll get on with it. The job generally runs to a few hours, including clearing up.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Let us know which floor the room is on
- Tell us about parking, stairs or access
- Avoid using the area for a few hours before we arrive
Getting a price
To get a price, send a couple of pictures using our quote form or call us. We will tell you honestly whether it can be repaired.
Advice
Repair or replace: which is better?
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why book with us
- CHAS and Constructionline accredited
- Honest advice, even when it means no job
- Everything repaired in place
- Rooms protected and left tidy
See our full price list or bath cost comparison.
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
When we would advise against a repair
To be straight with you, there are a few things a repair will not fix:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Rust that has eaten right through a steel bath
Send us pictures and we will tell you honestly before booking.
What we work on
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
Landlords, agents and businesses in Bennetland
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We regularly work with letting and managing agents. Send the address, photos and access details and we will handle the rest.
Our work in Bennetland
Bennetland is about 6 miles north-east of Goole, in East Riding of Yorkshire. Book a date that suits you, and we will give you an arrival time in advance, so you’re not left waiting in all day. We work in 299 places in East Riding of Yorkshire. We work right across the region, from Bennetland to Leeds (33 miles away).
All of HU15 and DN14 is covered. Jobs here include addresses on Mill Lane, Bennetland Lane and Clementhorpe Lane. We also cover the places around Bennetland: Bellasize (1 mile south), Gilberdyke (1 mile north-east), Greenoak (1 mile south-west), Scalby (1 mile north-east) and Sandholme (1 mile north). Further out, we also cover Beverley (15 miles north-east), Goole (6 miles south-west), Pocklington (13 miles north), Hessle (13 miles east), Cottingham (14 miles east) and Market Weighton (8 miles north-east).
Landmarks near Bennetland
We visit homes around The Cross Keys pub and Gilberdyke Primary School, among other places. The nearest railway station is Gilberdyke station, roughly 0.7 miles east of the centre. Other landmarks nearby include Goole and District Hospital (5.6 miles south-west). Not far away are Blacktoft Sands RSPB reserve.
Also in Bennetland
Repairs by material
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, just like other baths.
About our accreditations · Every repair comes with a one-year guarantee.
