Wrexham · Wales
Bath Repair in Bersham
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Bersham and across Wrexham. Send pictures for a free, fixed quote.
- Repairs from £95
- Damage beneath the taps
- Chips on the rim or sides
Bath repair at your home in Bersham
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. A repair stops both. Typical jobs include a failed DIY repair that’s discoloured or lifting and deep scratches in acrylic, in pressed steel enamel, whirlpool & spa baths and cast iron enamel.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Where
- Bersham (LL14)
- Region
- Wrexham
- Warranty
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Bersham: your questions answered
Will the price change on the day?
The price is fixed for what the photos show. If there’s more, we’ll tell you before starting.
Do you charge for travel?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
Is a holed acrylic bath repairable?
Generally, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
Will the repair show?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.
Can tenants book a repair?
Of course. Check with your landlord; we can send the quote to them too.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do you do work for letting agents?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Repairing versus replacing in Bersham
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the whole surface is worn, re-enamelling may make more sense, and we’ll tell you. Our bath repair starts from £95. What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Why book with us
- A fixed quote before you book
- We leave the room as we found it
- CHAS and Constructionline accredited
- Colours mixed by hand to suit your surface
Take a look at our prices page and guide to resurfacing and replacement costs.
Where we work around Bersham
Bersham is about 2 miles south-west of Wrexham, in Wrexham. Wherever you are in the LL14 postcode area, we carry out the work at your property. We cover all 115 towns and villages in Wrexham. Our nearest city page is Liverpool, about 26 miles away.
Our repair technicians cover all of LL14 and the streets around it. Neighbouring places we cover include Ddol (1 mile north-east), Rhostyllen (1 mile south-east), Pentre Bychan (1 mile south), Offa (1 mile north-east) and Talwrn (1 mile south-west). Further out, we also cover Acton (3 miles north-east), Little Acton (3 miles north-east), Gwersyllt (3 miles north), Llay (4 miles north), Gresford (5 miles north-east) and Rhosnesni (3 miles north-east).
Landmarks near Bersham
Around Bersham, we work in homes near Bellevue Park, Church of the Holy Trinity and Rhostyllen C.P. School. You’ll also find The Swan Inn (under half a mile south-east) and Ysgol Clywedog (1 mile north-east). Bersham’s nearest station is Wrexham Central station, roughly 1.5 miles north-east of the centre. A little further out are Bersham Ironworks and Heritage Centre (under half a mile north-west) and Tŷ Pawb (1.8 miles north-east). Not far away are Bersham Bank and Monks Pool.
When to call us in Bersham
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
Customers usually contact us about:
- Rust spots around the plughole
- Chips along the edge of the bath
- Scratches you can feel with a fingernail
- A kit repair that didn’t last
What to look for in a quote
- How long it needs to cure
- How the colour is matched
- What protection goes down before work starts
- What preparation is included
The process
There’s not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. The job generally runs to two to three hours for most chips.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, normally the next day.
Getting ready for the visit
- Let us know about parking or access
- Keep pets and children out of the room while we work
- Let us know which floor the room is on
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. You’ll get a fixed quote, not an estimate.
Advice
Landlords, agents and businesses in Bersham
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Nearby places to Bersham
Other services in Bersham
When a repair isn’t the answer
We won’t take on work that won’t last, so here’s what a repair cannot put right:
- Metal that has corroded all the way through
- Acrylic cracks with no access behind them
- A whole bath that is dull or worn, where a full re-enamel is the better fix
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Bersham
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Pressed steel enamel
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
Looking after it afterwards
It’s all simple stuff, just a few sensible habits:
- Cover the bath during DIY or decorating
- Check that an acrylic bath does not move when you stand in it
- Have new chips seen to early
- Fix dripping taps early to stop staining and limescale
Leave the repair to cure for as long as we say before running a bath. After that, gentle cleaning keeps it looking good.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Remove it before the repair.
About our accreditations · Every repair comes with a one-year guarantee.
